Torne-se um fornecedor Blog Novos itens

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy MEGA 380W Lithium Polymer carregador de bateria

Generating Links

Turnigy MEGA 380W Lithium Polymer carregador de bateria


Now save economize 0,00 € 0,00 €

75,17 €
Enviado de:
  • USA
  • International (Hong Kong)
Já comprado Discontinued Product

Please continue searching for a similar product.
Envio Grátis? Clique aqui aprender mais!

Você está pronto para cobrar taxas 380W e 20A para o seu alta taxa de carga C Turnigy / packs Zippy capazes? Sabemos a resposta é "SIM!", Por isso oferecemos-lhe a mega 380W equilíbrio de alta potência carregador Turnigy!

O Turnigy mega 380W é um alto poder de equilibrar carregador / descarregador de que pode lidar com até 6 células LiPo / vida e NiMH / NiCd até 18S com precisão. Junto com o Turnigy mega 380W é uma matriz de carregamento fios e plugues, adequado para a maioria das aplicações.

controlado por microprocessador
sensibilidade Delta-pico (NiMH / NiCd)
Individual carga balanceamento de células e de descarga
Li-ion, LiPo e vida capazes
Ni-Cd e NiMH capaz
De alta potência e um circuito de alto desempenho
função de armazenamento, permite que a corrente armazenamento seguro
armazenamento de dados (armazenar até 10 pacotes na memória)
carregamento cíclico / descarga

Nota: O sensor de temperatura não incluído.

Tensão de entrada: 11.0 - 18.0Volt
Corrente de carga: 0,1 - 20,0
Corrente de descarga: 0,1 - 5.0A
Capacidade de carga máxima: 380W tensão de entrada @> 15V
Capacidade de descarga máxima: 25W
Fuga de corrente para equilibrar Li-po: 200mAh / cell
Lithium contagem de células de bateria (LiPo / LiIo / Vida): 1-6 séries
NiCd / NiMH contagem de células da bateria: 1-18 série
Pb tensão da bateria: 2 -24V
Bateria memórias de configuração: 10
Controle de temperatura inteligente: Sim
Peso: 762g
Dimensões: 152X145X57mm

1 x Turnigy mega carregador 380W
1 x Banana plug w / XT60
1 x Banana plug w Clipes / Aligator
1 x chumbo XT60 w / Mulher Mini JST, Feminino Futaba e Brilho Ignitor plug
1 x Clips Pair Aligator
1 x JST adaptador XH

Este carregador tem um plug de balanceamento JST-XH, o que o torna compatível com Zippy, Turnigy e qualquer pacote com um saldo de chumbo JST-XH.

Nota: Poder sensor de temperatura de alimentação e não incluídos.

  • Turnigy 380w Mega Charger
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:

Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:

Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

dantheflyingman | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 15, 2013

So ive had this charger for about a week now and ive decided to post this review, my conclution on this charger is

-The build quality is amazing, encased in a full metal shell this feels sturdy and solid

-No power leaks, dont get shocked ever time u tought the charger like accucel 6 and 7

-Lives up to the 380w output and can charge 4s for me at 20A

-Simple to use, the buttons feel good to the touch and the firmware is easy to use and navigate around

-Comes with ample amount of charging leads and accessories, including a cool balance board

So overall a great charger for an even greater price and i would have to rccomend this charger to anyone out there!!

Great stuff hobbyking

Imprez | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2013

How can I start... I receieved this charger last week. It uses same program than imax B6 and all of those small chinese chargers, it's very easy and intuitive to use.

The real power of this charger is 240Watt at 12v... to get its 380 watt you must use 18v input and i don not know much supplies with 18v outpout.

Balancer its not much accurate, in a storage charge of a zippy 5Ah 20c 2s it remains one cell at 3.8v and the other at 3.79v, so its integrated balancer seems not much accurate. You'd better use one external for expensive batteries.

I charged Lead acid batteries at 0'1c and 0'05C, dont forguet deactivate the timer limitator and capacity limitator for huge batteries, those are preconfigurated to 120min and 5000mAh. This charger works fine with Pb.

Am very sorry but I still didn't charged any nimh so i can not review that.

Charger comes with some connectors as shown in the image.

The biggest deffect I can find is that the fan is very noisy and if it starts, always work at full power, so you cant sleep while charging batteries at high power (actually is not recommended lol).

I can find that the piece to connect 2. 3. 4. 5 or 6s to balancer is completly useless: you can connect the battery balancer plug directly to the charger while the negative pin must be always first, check it with the tester before do this.

However i have any battery that can't be charged up t

Roger-DK | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 01, 2013

Just says connection break. I tried three different cables and batteries without luck. It will cost me more to send this back than what I would get refunded! Waste of my hard earned money... :(

peter2482 | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 16, 2012

Works as it should. Using a pc power supply. Only negative is, the fans are very noisy. Other than that it seems to be a great charger

Cheetor | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 11, 2012

Been a very good charger for me. does a great job at charging my electric bike batteries. pumps out the power!. But boy is she loud, I guess those loud fans are needed with the kind of power it delivers, just make sure you get a nice big power supply for it. I'd definitly buy it again very good value for money.

Don | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2012

The charger arrived today , 12 days to new zealand, great and well packed.
There have been two issues already the supply lead is way too short, I had to add a meter of (two core cable ) to make it usable.
The white balance plug, to multie balance adaptor wouldnt fit in the hole , I bent it trying to get it in,so pulled the unit apart to fix it. I ended up shaving some plastic off the plug, The heat sink inside has been cut with a massive band saw and never cleaned up, what a mess.
Apart from that the charger works well .I have a little 50 watt turnigy and it wasnt able to charge a 6s above 86pcnt with 2.5 amps, the 380 w takes it to 98pcnt with 20 watts easily.
All up its an ok unit and I would advise others to buy it.

Ooben | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 10, 2012

Got this charger because I have everything from ni-cads to LiIo computer pulls to charge. It seems to be a great charger...but it is kind of hard to tell without any instructions. I have used it with niXX batteries and it does a very good job at detecting delta-peaks, but until I can decipher the lithium settings I'm not going to be using it on my litho batteries. Does HobbyKing have any instructions for this charger?

jeff125 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 08, 2012

Rock solid thus far.

Only reached 51C while charging a 6S pack at 12amps. Fans are loud but do a good job cooling the unit.

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 25, 2012

Great battery charger for the value. Cooling fans are a little noisy when loading batteries with high amperage. The display is bright and easy to read.

The buttons and procedures for the programming are the same of the other charger. Well made and sturdy housing.

Amply satisfied.

SCTarguard387 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2011

Had mine for about 2 1/2 months working fine until today. Powered it up and would not go past the start up screen, nothing. None of the buttons worked. Powered off several times nope then I lightly tapped it on my work bench and bam there it goes working again.

  1. 1
  2. 2
Arquivos de clientes
manual Download [1644]
MANUAL Download [1]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!