Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy MEGA 400W V2 Lithium Polymer Carregador de Bateria (versão 2)

Generating Links

Turnigy MEGA 400W V2 Lithium Polymer Carregador de Bateria (versão 2)

Preço:

Now save economize 0,00 € 0,00 €

73,94 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
T400W-V2
Envio Grátis? Clique aqui aprender mais!

Tirar proveito da nova taxa de carga de alta C no novo Zippy, Turnigy e baterias Tunrigy Nano-Tech com o novo Turnigy mega carregador 400W V2.

Esta é uma versão nova e melhorada do original carregador 400W mega.

O Turnigy mega 400W V2 é um alto poder de equilibrar carregador / descarregador de que pode lidar com até taxas de carga 20A sobre 6S LiPo / vida e 18S NiCd / NiMH com precisão. Junto com o Turnigy mega 400W V2 é uma matriz de carregamento fios e plugues, adequado para a maioria das aplicações.


Características;
controlado por microprocessador
sensibilidade Delta-pico (NiMH / NiCd)
Individual carga balanceamento de células e de descarga
Li-ion, LiPo e vida capazes
Ni-Cd e NiMH capaz
De alta potência e um circuito de alto desempenho
função de armazenamento, permite que a corrente armazenamento seguro
armazenamento de dados (armazenar até 10 pacotes na memória)
carregamento cíclico / descarga

Nota: O sensor de temperatura não incluído.

Spec.
Tensão de entrada: 11.0 - 18.0Volt
Corrente de carga: 0,1 - 20,0
Corrente de descarga: 0,1 - 5.0A
Capacidade de carga máxima: 400W tensão de entrada @> 15V
Capacidade de descarga máxima: 25W
Fuga de corrente para equilibrar Li-po: 200mAh / cell
Lithium contagem de células de bateria (LiPo / LiIo / Vida): 1-6 séries
NiCd / NiMH contagem de células da bateria: 1-18 série
Pb tensão da bateria: 2 -24V
Bateria memórias de configuração: 10
Controle de temperatura inteligente: Sim
Peso: 815g
Dimensões: 146x144x56mm

Incluindo;
1 x Turnigy mega 400W carregador V2
1 x JST adaptador XH
1 x bujão Banana w XT60 / homem
1 x bujão Banana w / Leads nuas
1 x XT60 w clip / aligator
1 x XT60 W / fêmea JST
1 x XT60 w / feminino Futaba
1 x clipe jacaré para condutores de entrada do carregador

Este carregador tem uma ficha carga JST-XH, o que o torna compatível com Zippy, HXT, Turnigy e qualquer pacote com um adaptador JST.

Nota: Poder sensor de temperatura de alimentação e não incluídos.

  • Turnigy Mega 400w V2 Charger
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Kenneth | Comprador Verificado

  • Overall
  • Quality
  • Value

Buy something else !

Mar 04, 2017

The charger came defective right out of the box, shows connection break when starts charging the batteries.
I bought 2 of these chargers few years a go but never happened something like this before that came defective.
Now I should wait for my money return .
The charger is already in the garbage bin !

Tonino | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2016

When it worked it worked noisy but fine. It burned after just 1.5 years of use. That never happened to me with a charger. I have had at least 8 chargers of different brands. Normally i could sell them because of increased powerdemand. This one ended in the garbage bin a couple of years to soon.

motoraton | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 03, 2016

Very Bad Charger, I charge only 20 batteries and now Itsn´t balance, never stop the charger, always "dancing qickly" bettwen 4.16 ans 4.22
I have the charger since 1 year...and 1 month and I could´t use the warranty,never again

petrim | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 05, 2016

Otherwise nice charger, but internal temperature sensor shows 17deg celsius, and the fans are running in full throttle, very loud charger.
I use server power supply with 14v@47 amps and its much quieter than this.
Calibration is off, so compared to original Imax B6 (with cheali charger mod), and the voltages are 0.2 volts off compared to it. Verified with multimeter.
So quality is not good, interface is a copy of Imax B6.
It has banana plugs for charger connection and cables/balance board are good. Have to test it later with Cheali charger mod to be able to calibrate it.
(Stock version can not be calibrated).

blazer1 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 05, 2016

I bought this one on sale, but that's not the only reason. I LOVE the Turnigy chargers. Easy to use and work just great! I've had my original acucell-6 for about 7 years now and its still going. This one is more than adequate for my charging needs of 4 and 5s 5000mah packs. Actually, it's capable of more than twice the amount of power I need.. 'Nuf said...

LikarD | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 21, 2016

This is the second one i have bought and i am very happy with it. The only bad is that these are very loud - fans are louder than my heli :D, but cherging is good and acurate enough and most important i can charge fast my 5000mah 6 s batts. Bye

Christopher | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 26, 2015

Super Charger! So good, easy to use and reliable I bought another!
Although the new one had a malfunctioning key/button, I followed the Returns/RMA procedure, made a little video on my phone, and Hobby King are sending out another no arguments! Brilliant service!

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 19, 2015

consigliato dai miei amici ,sono contento di averlo comprato ottimo

Aeronut | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 05, 2015

Great charger. Charges my 10000 mah 4cell in 30 min. @ 1C (10a for this battery) YOU NEED A GOOD POWER SUPPLY one that can deliver the amps like HobbyKing 540w 100~120v Power Supply (13.8v~18v - 30amp) I'm not using that one but one similar from efuel power regardless you need power to drive this charger running mine at 15.3v 10a

plotterwelt | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 05, 2015

Goeie lader met veel vermogen

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Arquivos de clientes
noise fix3 Download [214]
noise fix2 Download [162]
noise fix Download [203]
No File Name Download [203]
Manual Download [1756]
manual Download [1756]
No File Name Download [128]
T400W-V2 Manual Download [1756]
MANUAL Download [3]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!