The Mad Max de servos.
Branqueado a partir de um único bloco de 6061 *, este servo grita "louco duro"!
A liga MG959 branqueado transporta tanto atitude como faz torque e robustez.
Por que nós nos incomodamos fazendo um CNC moído 6061 servo e, em seguida, cobrar menos de 25 dólares por isso? ...
Beause nós podemos!
Nenhuma quantidade de R / C contusão caminhão ou avião cai irá distorcer caso deste servo.
Ele inclui acessórios e tem rolamentos de esferas duplos e engrenagens de metal.
Sistema de controle: + pulso controle de largura 1520usec neutra
Pulso necessários: pico 3-5V para o pico de onda quadrada
Tensão de funcionamento: 4.8V
Faixa de temperatura de operação: -20 ~ + 60 ° C
Velocidade de operação: 0.2sec / 60 graus sem carga
Stall Torque @ 4.8V: 166 oz / in. (12.0kg.cm)
Stall Torque @ 6.0V: 200 oz / in. (15.0kg.cm)
Ângulo de funcionamento: 45 graus. um pulso lado viajando 400usec
Direção: Contador no sentido horário / impulso viajar 1520-1900usec
Tipo de Motor: Coreless motor
Unidade de potenciómetro: unidade indireta
Tipo de rolamento: rolamento de esferas duplo
Tipo de arte: Todas as engrenagens de metal
Conector de comprimento do fio: 12em
Dimensões: 40.2 x 20.1 x 36.8mm
Peso: 2,64 onças (75g)
* Não macio liga extrudido que é depois acabado para olhar como foi branqueado a partir de um lingote. (Prática comum por Align e outras fábricas de helicóptero, servo e do carro que fazem "CNC" peças em ligas)
Características do Produto
Peso ( g )
Speed ( Sec / 60deg )
Torque ( kg) ( min. 0,01 kg )
Unit Weight (g):
A ( mm ):
C ( mm )
D ( mm ):
E ( mm):
F ( mm )
They have good power , are beautiful and cheap.
But they are not water resistant at all, very bad sealed, are very noisy ,and the front pinion is too weak and break easily on any small crush.- I think they are recomended for crawling only , but not for running cars.- My opinion.After reading through all the reviews, most find these servo's are excellent others claim jittering and not centering very well, my findings were excellent when first fitted into a heavy model plane, ailerons started to jitter replaced these and then elevator started to jitter only control surface still fitted after about 20 flights is a pair in pull pull for rudder had 9 of these fitted to an extra 330 and had to remove 6 of these, I have a powerboard fitted and running all servo's on 5.1V they have plenty of current available are their any solutions to this jittering developing problem, it is a very impressive alloy servo has good gearing and mechanically very well built, it is a shame the electronics let it down.Maybe this review is closed, but will try again, had 9 of these fitted to large scale plane using a powerboard dual redundant battery setup voltage set at 5V with ample current available, they all started out ok, then developed centering flutter, contstant jitter, many others have reported this, has anyone discovered a solution they are a very nice alloy digital servo excellent machanics but electrically very disappointing, any advise appreciated.I, Like many others are very disappointed with such a lovely looking alloy servos really looks first class, but, simply they start off good and then develope centering and flutter problems, have 9 of these fitted to a large plane and had to eventually remove the lot as they got so bad, the gears and mechanism are first class, the electronics let it down, mine is set up with a powerboard with a regalated power supply of 5V and planty of current available, any ideas of fixing the jittering would be appreciated.Be warned if using these on planes they start off good then devolope centering problems, jitter or flutter of all control surfaces, very dangerous, on big planes using multiple servos on control surfaces, using a powerboard adj to 5 volts, so no issues with voltage or current and a dual battery setup. speed and torq are very good and gears and construction are excellent reason for purchasing these, the fluttering is the only disappointment, have had to remove all 9 from my plane, I read many others have experienced same results are their any suggestions to fix up such a nice looking servo's electronics.I have been running 4 of these in a 140 size 2 meter Sukhoi for 12 months and after more than 300 flights, they are working faultlessly.
Thanks HK, a magic servo at a terrific price.I think next time you get these in stock you should order more than 30 units, they didn't last long this time and I missed out after waiting 6 weeks! ugh.Estes servos so muito fortes, rpidos e resistentes pois o corpo deles confeccionado em um bloco slido de liga de alumnio muito bom j usamos vrio em helicpteros principalmente para rotor de cauda.These servos are very good, use 9 in a heavy model Extra 330L plenty of torq way in excess for unlimited Aerobatics, speed is very good you will have to use these via a power box to get full current don't go over 5V and they will last, or use a bec, have a look inside you will not get a better Servo for this price.Digital and Coreless motors.I have used this servo for more than 6 months now. What can i say. It has always worked perfectly. It has plenty of torque and speed BUT in order to achieve this you need A POWERFUL BEC! My old ESC used a 5v BEC and when i switched to my new one with 6v BEC, the servo felt like a different one! I believe this is the best servo for the price. PLEASE DO correct me if i am wrong!
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!