Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy Mobius 2 eixos cardan com controlador Tarot e AX2206 Motors

Generating Links

Turnigy Mobius 2 eixos cardan com controlador Tarot e AX2206 Motors

Preço:

Now save economize 75,78 € 75,78 €

Special Price 27,46 € 27,46 €

You save economize 75,78 € 75,78 €

Was  103,24 €

Enviado de:
  • USA
  • International (Hong Kong)
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9171000509-0
Envio Grátis? Clique aqui aprender mais!

Turnigy reconheceram a Mobius ActionCam como o go-to câmera para o passatempo RC e partiu para fazer um baixo custo, peso leve, componente de qualidade de 2 eixos cardan para coincidir com tamanho menor do Mobius.

O Turnigy Mobius cardan começou com o popular AX 2206 BLGM, perfeito para seu pequeno tamanho e sendo bem conhecido como um grande motor. De lá Turnigy tinha os motores feitos para coincidir com o seu spec. O Turnigy Mobius cardan olhou para um dos líderes em gimbals para o seu controlador robusto e interface gráfica fácil, instalando-se na BGC eixo Tarot 2 como o coração da Mobius cardan e inclui o programador USB para futuras atualizações e configuração. Turnigy então se propôs a criar um quadro leve e robusta em torno do Mobius e hardware escolhido. O resultado é um dos melhores gimbals disponíveis eo melhor de tudo é feito especificamente para o Mobius.

Características:
• Leve
• Motores AX2206 Gimbal
• BGC Tarot e IMU para o controle
• Modo Stick e Taxa de roll e pitch controle
• RC controle roll e pitch
• ALL CNC alumínio e quadro composto
• ferramenta de programação incluído USB

* Nota: Por favor, preste muita atenção para os locais de parafuso nas instruções e observe o motor de passo usa os 2 M6 parafusos, se os parafusos M8 são usados ​​podem danificar os enrolamentos do motor, causando o eixo de passo a tremer quando ligado.

Ficha do quadro:
Tamanho: HxWxL 76x67x100mm max todo o tamanho
Peso: 160 g

Motor Specs AX2206:
Poles: 12N14P
KV (RPM / V): 140
Resistência: 11.25omh
Peso: 32,3 g
Fio: 0,17 milímetros
Torque: 230g
Furos centro da parte inferior do centro: 16mm e 19 milímetros
Furos centro da parte superior do centro: 12mm

Tarô ZTX22 Especificações:
Tensão de Trabalho: DC 7.4V ~ 14.8V (12V Recomendado, três baterias de lítio)
Corrente de trabalho: 200mA-500mA (tensão de alimentação e o motor relacionado)
Temperatura de trabalho: -15C ~ 65C
Processador: Dual 32-bit de alta velocidade do processador de núcleo ARM
Sensor: Três MEMS rotor giroscópio MEMS rotor acelerômetros
Velocidade angular máxima: 2000 ° / seg
Aceleração máxima: 16g
Frequência de controle: 2000Hz
Frequência de acionamento do motor: 20KHz (sem unidade de suavização de ruído)
Exatidão de controle: 0,1 degControl faixa de ângulo: -45 ° ~ 45 ° (rolo), -135 ° ~ 90 ° (tilt)
Interface de Energia: DC 7.4V ~ 14.8V (Recomendado 12V, bateria de três lítio)

Nota: Este é um Kit e requer alguma montagem e um computador baseado em Windows a piscar a configuração Tarot com a ferramenta USB incluído.

  • Turnigy Mobius 2 Axis Gimbal
  • <" style="background-image: url(https://img.youtube.com/vi/JjLCdvFrprk" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen>
    Turnigy Mobious 2 Axis Gimbal
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

randy | Comprador Verificado

  • Overall
  • Quality
  • Value

Nice size. Made well.

Aug 26, 2019

Looks decent . I hope the board functions properly for its unused so far.

Maximilien | Comprador Verificado

  • Overall
  • Quality
  • Value

RAGE

Oct 13, 2018

une fois brancher sur l'ordi, mes problème en commencé. Entre l'ordi qui na pas les bon driveur un coups sur deux et le logiciel qui crash des qu'il détecte la gimball. J'en peut plus..

Lundy_ | Comprador Verificado

  • Overall
  • Quality
  • Value

You need a bit of patience to get it working .

Mar 22, 2018

The assembly is straight forward and easy to do .But the problems started when I connected for the first time the battery, I was faced with a untamed wild jumping bronco gimbal ,that was in no way useful to take any video. Even after connecting to the configuring program I was not able to tame it.One motor was burnt through caused by the uncontrolled up and down jiggling of the gimbal, I have ordered a spare motor and could solve that part of the problem.
The program was saying the latest version software 1.5 was installed ,and all my attempts to tweak it via the configuration software failed.After hours of trying and fiddling on the settings I decided to reinstall the firmware 1.5 again ,and that solved the unmanageable gimbal in to a workable solution, I needed a long time to fine tune it but in the end its working smooth and without jiggle problems .So I think that the installed firmware was somehow damaged in some way. and now everything is working like it should do.
The construction of the gimbal is not very Mobius friendly ,the way it is to connect to the gimbal platform is a paste and cut work solution with double sided sticky tape and a rubber band ,while the camera comes with a perfect holder with camera thread, with a little creativity you can drill a hole yourself in the platform and still leave room for the gyroscope and accelerometers that are situated under the camera platform .
After this ,shall we say little set back ,I have now a nice working gimbal for little money.
Don't give up to eazy on it ,you can make it work ,it only needs a lot of your time and patience .

David | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 14, 2016

I have adapted the Turnigy gimbal to use the RunCam2 camera. I made an aluminium holder attaching it with four small countersunk head bolts and nuts with lock washers. Under the holder is some thin sheet lead so that when there is no power the camera is completely balanced. A couple of rubber bands hold it in case of hard landings. My videos are now very smooth and great to view.

lampo.ep | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2016

precio bueno y calidad tambien

Engy66 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2016

Every time that I connect the gimbal the motors do not start and the light sets at Green solid in mode Over current. Can anyone help me?

Beachcomber | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 19, 2016

Just finished installing this gimbal on my quad, for use with RunCam HD (similar in size to Mobius). Can't complain like the other reviews. Mine just works. No melting plastic, no blue smoke. Here's a couple of tips. Go to the same item at International Warehouse, and click on "videos" and "files". You'll get lots of good info. I downloaded the latest version 1.5 software before receiving my gimbal. but discovered it came with ver 1.5 in both gimbal and motor control, so I didn't need to re-flash. Will admit adjusting all the parameters was (and still is) a pain. Default settings are not for RunCam / Mobius. A couple of files suggest different settings, but I had to fiddle even with those to stop the jiggle. Still trying to fine tune, but getting pretty stable on my wobbly quad.

pardus | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 05, 2016

Didn't have luck with this. Tuning is very difficult and I could never get smooth video no matter what I tried and I tried a lot over 3 months. The motors are also way overkill for a Mobius and the whole gimbal is very heavy to carry a light Mobius. Not worth the price.

Earl | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 26, 2016

Purchase this a few weeks back and it's still not working. I'm sure its me, but getting this setup is a pain. Haven't spent a lot of time on it, but why isn't this sent already flashed so you don't have to do the find, flash and configure thing. I'd rather be flying.

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 22, 2016

????? ?? ????? ??????, ?????????? ????? ??????! ???? ???????? ? ???????. ?????????? ? ?????? ???????. ???????? ??????, ????? ????????? ?????????????.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Arquivos de clientes
PRM0175.pdf Download [1716]
No File Name Download [21]
Revised Plate Download [95]
Tarot 2-Axis Brushless Gimbal for Gopro Download [594]
BadgerJed setup lessons learnt - Turnigy Download [319]
No File Name Download [2126]
insttruction's and link to software.doc Download [26]
Software & Config 2018.docx Download [12]
Software & Config 2018 Download [12]
mobius conf 1 Download [12]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!