Turnigy Monstro-2000 200A 4-12S Brushless ESC

• Overall
• Quality
• Value

Turnigy ca 80-80 an Monster-2000 200A

Aug 05, 2019

Welche Einstellungen muss ich am Regler machen damit der Motor nicht mehr bei Vollgas stottert?
Oder geht der Regler an dem Turnigy 80-80 160kv nicht?
Ich bin Ratlos.
Bitte um Hilfe!

• Overall
• Quality
• Value

Customer Rated

Oct 10, 2016

I have had some issues with the ESC. The largest being cold solider joint on the motor wires. Luckily the joint failed on a ground test or I would have lost my plane.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 09, 2016

This ESC truly is a MONSTER !

High quality build. Trottle reaction runs smooth. I run this ESC on a ROTOMAX 50 cc on 10 cell lipo, It runs like h*ll.

• Overall
• Quality
• Value

Customer Rated

Mar 20, 2015

I installed one of these with the 50 to 80 cc equivalent motor in my friends giant 1/4 scale 110 inch cub, and the performance is unbelievable!! When folks watch it take off and go straight up, they can't believe it is an electric powered plane! (maybe a little overpowered?) It has worked flawlessly! We get 10 minute flight times on two 5300 mah six cells in series for 12s. I will be installing one in my giant scale Top Flight Corsair with the same HK motor we are using in the cub. Can't wait!

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 09, 2013

Below are the products you purchased in the last 45 days.

Help your fellow hobbyists and earn free points

• Overall
• Quality
• Value

Customer Rated

Jun 16, 2013

Good ESC. I had no issues with mine. In my case I use two of them for an EV project. Not the ideal option but great value and very light weight. Thanks HobbyKing.

• Overall
• Quality
• Value

Customer Rated

Sep 16, 2012

Bonjour tous,j'ai achet ce variateur pour mon Kasama Srimok 90E et je tourne en 12 S lipo,je suis surpris par la qualit de ce variateur,et de plus j'adore linterrupteur de marche arrt,il faut juste ajouter un anti-flash pour ltincelle et tout va bien ,j'y est install le super SK3 Tunirgy en 480Kv et tout vas bien,merci hobby-king...

• Overall
• Quality
• Value

Customer Rated

Oct 29, 2011

Bonjour,j'utilise ce variateur sur mon Srimok 90E en 10S 5000mah,sans aucuns probleme simple a programmer avec la carte verte,il me fait tourner un Scorpion NexDay 560KV avec des picks a 150Amps,juste le demarrage qui n'est pas trop Soft,mais le rapport qualite prix est la,tres bien aussi l'interrupteur de mise en route que l'on ne voit pas sur la photo c'est super on branche tout puis on met en route avec l'inter,bien vue ! merci HK !

• Overall
• Quality
• Value

Customer Rated

Sep 13, 2011

I'm using two of these to power an ultralight paramotor.
Here's a video showing some of the testing of it:
http://www.youtube.com/watch?v=fXVtGs2OkCM
Please let me know if you're interested in building an ultralight. I'm planning to share all drawing and software for the microscontroller that I'm using to control the ESCs.
//Arvid

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 27, 2011

This ESC work in my Eisberg(From MHZ)on 10S2P 4000 Nanotec with a Scorpion 5035-760KV on a Octura X455-3 Propeller.Maximum speed was 104.0km/h.The consumtion was 4500mA/h in 5 Minutes.Motor-Temperatur was 59.6C(Infrared)the ESC has 55C.at the 1st run I only have a Watercooler downside(to cooling only the MosFet)but the Elektronic upside must also cooled with a Fan.Many shutdown I have from Overtemperature,so I put a CPU-Cooler on top.Now the Problem is solved.ATENTION!!Do not forget to program the Zerro/Full throttle bevore you use them!!