Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy Multistar 3508-640Kv 14Pole Multi-Rotor Outrunner

Generating Links

Turnigy Multistar 3508-640Kv 14Pole Multi-Rotor Outrunner

Preço:

Now save guardar 0,00 € 0,00 €

29,00 €
Status:
Indisponível!
SKU:
9192000119-0
Envio Grátis? Clique aqui aprender mais!

Olhando para o sistema de energia final para o seu próximo projeto Multi-rotor? Não procure mais!

Os OutRunners Turnigy Multistar são projetados com uma coisa em mente - maximizando o desempenho Multi-rotor! Eles apresentam ímãs high-end, rolamentos de alta qualidade e todos são precisão equilibrada para um funcionamento suave, estes motores são projetados especificamente para uso multi-rotor.

Estes incluem um adaptador de suporte e tem um construído em alumínio de montagem para instalação rápida e fácil em seu quadro multi-rotor.

Estes OutRunners Multistar foram especificamente projetados a partir do zero para uso multi-rotor e não são baseados em motores de avião.


Spec:
KV (RPM / V): 640
Células Lipo: 2-5s
Max Watts: 550W
Max. correntes (10s): 30 ampères
Sem carga atual: 0,6 ampères
Resistência intemo: 0,120 ohm
Número de polos: 14
Tamanho do eixo: 6mm
Dimensões (Dia.xL): 42 x 23 mm
Furos de parafuso Espaçamento: 25mm
Rosca do parafuso: M3
Conector: 3,5 milímetros tipo de marcador Connector
Peso: 98 g

  • Kv ( rpm / v ) 640.00
  • Correntes Max (A) 30.00
  • Resistência (MH ) 120.00
  • Max Tensão ( V) 19.00
  • Potência (W) 550.00
  • Shaft A ( mm) 0.00
  • Comprimento B (mm) 26.00
  • Diâmetro C ( mm ) 42.00
  • Pode Comprimento D (mm) 11.00
  • Comprimento Total E ( mm) 26.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Registre-se para escrever comentários, por favor assinar em ou registar

triumph | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Mar 28, 2015

I bought 6 of these engines. Good quality, perfect balance. Bearings really inferior quality. Static measurements (LiPo4S5000mAh) thrust of the propeller APC (12x3,8-16A = 1500 g) (13x4-12A = 1330 g) (14x4,7-22,5A = 1830 grams - but after 5min very warm) with carbon propeller (13x4 -11A = 1250 g) Test Hexacopter in hover without a gimbal and camera 30A. In flight 70A.

Koupil jsem 6 tyto motory. Kvalita dobr, vyven perfektn. Loiska opravdu hor kvalita. Statick men (LiPo4S5000mAh) thrust s vrtule APC:(12x3,8-16A=1500g)(13x4-12A=1330g)(14x4,7-22,5A=1830g - ale po 5min velmi tepl), s karbonovou vrtul: (13x4-11A=1250g) Test Hexacopter v hover bez gimbal a camery 30A. V letu 70A.

Rotceh_dnih | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Dec 30, 2014

Just bought 4 and 3 of them have bearing issues where like others if spun by hand click and grind , This has left me with 3 useless motors till i replace all the bearing as i refuse to fly anything not up to scratch , thinking about contacting HK for refund :/

Christian | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Sep 16, 2014

Very good, smooth running and efficient Motor. With an APC 13x4.5, it produces 500g thrust at only 4A. My 2Kg quad hovers at 17A and i get around 30pcnt more flight time compared to my previous motors NTM 28-30S. Great price also!

But be careful: The screws for the propholder that come with the Motor ar slightly too long and on some motors, they will touch the stator locking pin in the Motor. There is a locking pin between the bearings of the motor and the stator so that the stator doesn't move. This pin was not pushed all the way in at 3 out of 6 motors and it touched the screw endings of the propholder. Solutions: Shorter screws or disasembling the Motor and taping the pin all the way in. That's what I did.

RH1957 | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Aug 21, 2014

Ich habe den Motor mal im Prfstand (=Standschubmessung) vermessen - Netzgert mit max. 30V / 30A und Turnigy Trust 45A ESC. und Spg auf 12 V = 3S eingestellt.
Messung1- Prop 11x6 APC Verbrenner-Prop. - 11 A - 6450 U/min.
Messung2- Prop 12x6 APC Elektro - 11 A - 6430 U/min.
Messung3- Prop 13x6,5 APC Elektro - 14 A - 6020 U/min.
Messung4- Prop 14x7 APC Nachb. HobbyKing - 16,5 A - 5700 U/min.

JOHN | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Aug 20, 2014

Flying these on a QAV500 WITH 10" slow fly props.These motors make serious power on Nanotech 4s 4000mah batteries/30 amp Hobbyking ESC's /CC3D and are the quietest motors I have flown on any quad.I have four
quads from mini to 500 size and this is the smoothest feeling quad I own.
Thought they might be a bit much for this frame but I was pleasantly surprised how well this combination works together.

Markus | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jul 19, 2014

Guter Motor, der ab Werk schon sehr gut gewuchtet ist und angenehm lange Flugzeiten ermglicht. Die Kabel drften gerne etwas lnger sein, da sie fr einen Hexacopter grer als 600 mm nicht lang genug sind. Die Prop Mitnehmer passen auch wunderbar und so lsst der Motor nur wenig Raum fr negative Kritik. Aber leider gibt es eine erhebliche Schwche. Die Lager sind von so schlechter Qualitt, dass sie teilweise schon nach wenigen Minuten in der Luft ausgetauscht werden sollten. Sie bekommen teilweise so viel Spiel, dass die Motoren anfangen zu vibrieren und teilweise sogar mit der Glocke gegen den Stator kommen. Gute Lager kosten leider ein paar Euro und so kommt man auch leicht in die Preisregion hochwertigerer Motoren, wo man nicht den Aufwand hat direkt die Lager tauschen zu mssen. Unterm Strich wrde ich den Motor aber trotzdem empfehlen und auch wieder kaufen.

spilVentinjsh | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Mar 29, 2014

All in all good motor for the price, I use it with 13x4 carbon props and got maximum 15A and 1.3kg thryst from motor with 4s. I'll go for 13x6.5. Only drawback, bearings is from cheap ones. After about hour of total flying there are little play in 3 motors out of 4. (Propellers are balanced of course). So I'll change all of them, maybe even to ceramics. If anyone interested, size of bearings are 4x9x4.

rdamontz | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Mar 13, 2014

very good motors. i used 3 for my Talon Tricopter with extended booms. it can handle 14x47 SF props, motors doesn't heat.

Esbjoern | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Nov 11, 2013

Very pleased with this motor. I have installed it in the H.A.L. with a 12x4.7 prop, and it hovers nicely at 45pcnt throttle on a 3S LiPo. I chose this motor for its great flexibility as it will take up to 5S as the weight of the quad goes up when you start adding your payload.
Forget the smaller props for this motor. If you want to spin a 10" prop get a motor with a higher kV. Torque is king!

RICHARD | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Aug 12, 2013

Nice motors so far, I am running 4 of these on a 750mm quad from TMQuads. 30 amp Mystery ESC flashed with Simon K 12x4.7 slow fly props. 4 pounds (1.8kg) total weight. 2.5 HK flight control 4000ma 3s battery yields 16minutes of flight time , will hover aprox 20 minutes. Very pleased. Motors and esc are barely warm.

Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!