Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar

Turnigy Multistar 5130-350Kv 16Pole Multi-Rotor Outrunner

Turnigy Multistar 5130-350Kv 16Pole Multi-Rotor Outrunner

Now save guardar 8,28 € 8,28 €

Special Price 41,40 € 41,40 €

You save guardar 8,28 € 8,28 €

Was  49,68 €

Indisponível!
Stock:
OUT OF STOCK
Peso:
315 g
SKU:
9392000014

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
Descrição
do

Olhando para o sistema de energia final para o seu próximo projeto Multi-rotor? Não procure mais!

Os OutRunners Turnigy Multistar são projetados com uma coisa em mente - maximizando o desempenho Multi-rotor! Eles apresentam high-end 45SH ímãs, rolamentos NMB alta qualidade, 16 pólos, montagem de motor personalizado e todos são precisão equilibrada para um funcionamento suave, estes motores são projetados especificamente para uso multi-rotor.

A 5130-350 inclui um adaptador de suporte e tem um construído em alumínio de montagem para instalação rápida e fácil em seu quadro multi-rotor. Estes motores são fornecidos dentro de uma espuma agradável alinhado caixa de metal Multistar.

Estes OutRunners Multistar foram especificamente projetados a partir do zero para uso multi-rotor e não são baseados em motores de avião.


Spec:
KV (RPM / V): 350
Células Lipo: 6s
Max Surge Watts (W): 400
Corrente de trabalho: 13 amps
Max.current (10s): 16 amps
Sem carga atual: 0,5 amperes
Resistência intemo: 0,099 ohm
Número de polos: 16
Dimensões (Dia.xL): 51 x 30 mm
Shaft: 4 mm
Sugeriu Prop: 15 x 5.5
Peso: 152 g

Product
Specifications

Características do Produto

  • SKU:
    9392000014
  • Brand:
    MultiStar
  • Peso ( g )
    315.00
  • Comprimento
    110.00
  • Largura:
    60.00
  • Altura:
    75.00
  • Kv ( rpm / v )
    350.00
  • Correntes Max (A)
    16.00
  • Potência (W):
    400.00
  • Comprimento B (mm):
    30.00
  • Pode Comprimento D (mm)
    20.00
  • Max Tensão ( V)
    22.00
  • Shaft A ( mm):
    4.00
  • Unit Weight (g):
    152
  • Diâmetro C ( mm )
    52.00
  • Comprimento Total E ( mm)
    35.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I'm going to upgrade this review of this motor. Since we replaced the bearings on all 6 units, we are impressed by the power and efficiency this motor delivers. Running on a 21lb Hex, spinning 16x5 APC props these motors don't even get warm under heavy stress. ESC's are Castle 35A multirotor ESC. It seems to be a perfect match as even the ESC's remain cool.

10Kx2 ma 22v batterys provide 30 minute mission times with a decent reserve.

We made custom tooling for these to get the out-runner can open and to remove and replace the stock bearings with NSK. Custom shims were ground to adjust the pre-load.

With the price reduced to 48 bucks this is a good deal for any project needing heay lifting power on a 22v hex
Quality
Value
Overall
Quality
Value
Overall
So sad, This motor is an epic fail...read on
Completely unusable, All 6 motors for my customers Hex have .003 in. axial play in the shaft. Once again, HK goes to great length to provide a superb looking product, Well machined, Well Wound. Only to fail with the bloody top bearing on ALL 6.

These Motor run cool, deliver the rated power and would have been a perfect match if my Hex didn't move. any roll motion caused the motors to vibrate and emit a horrible crunching sound with a serious increase in vibration. I don't trust them as they are. Put them on the shops test stand and the same issue if the assembley was rotated.

Mechanical Play is not an option on a brushless multi-rotor motor this size.

We took a chance on these and now stuck with almost $400 of SCRAP. Due to thier closed can design, bearing replacement is not an option.

Not even going to argue a return, Just will stick to the few thing my business needs that are proven to work with no issues from HK...Lesson learned

~johnny
Aromas Robotics
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
esc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.