Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy Multistar BLheli_32 ARM 33A 3g Race Spec ESC 2~5S (OPTO)

Generating Links

Turnigy Multistar BLheli_32 ARM 33A 3g Race Spec ESC 2~5S (OPTO)

Preço:

Now save economize 0,00 € 0,00 €

11,98 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9351000099-0
Envio Grátis? Clique aqui aprender mais!

The Turnigy MultiStar BLheli_32 ARM ESCs are very light, compact, super simple to install and have a very easy setup process. If you're looking for an edge against the competition and take your FPV drone racing seriously then the Turnigy MultiStar BLheli_32 ARM ESCs are worth taking a closer look at.


Turnigy MultiStar BLheli_32 ARM ESCs feature a proprietary firmware (rumored to have been developed in DrEvils Lab!!) that delivers a smooth linear throttle response, without sacrificing a rapid, crisp response to your throttle inputs.


Each ESC has plated connections to allow you to easily solder your motor wires directly to the PCB and then add your preferred connector to the pre-tinned power cables. With their small lightweight design these ESC's will have you racing fast and at a very affordable price. 


Features:
• Lightweight (3g)
• Smooth and linear throttle control
• Fast response to throttle input
• Arm Cortex-M0 MCU
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Supports 480Hz high refresh rates
• Programmable


Specs:
Constant Current: 33A
Cells: 2~5S
Input Voltage: 8.4v ~ 21v
BEC: None (opto only)
MCU: Arm Cortex-M0
Timing: Auto
Frequency: 48Mhz
Programmable: Yes (with Multistar program card)
PCB Size: 29 x 16 x 5mm
Weight: 3g

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Pablo | Comprador Verificado

  • Overall
  • Quality
  • Value

Very Bad

Mar 03, 2021

Very Bad I buy 7 and 2 don't works, one short cut and another don't drive motor

Dutchfpv | Comprador Verificado

  • Overall
  • Quality
  • Value

Perfect in a s1100

Feb 10, 2021

They work great and easy to setup with blheli in pas through mode with a matek board. So you dont need the multistar program card! Add some heatsinks because i use 2 of them in a Harrier s1100 flying wing.

Valev | Comprador Verificado

  • Overall
  • Quality
  • Value

Good

Jan 21, 2021

Very good ESC, I use on fixed wing

Laurent | Comprador Verificado

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Comprador Verificado

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Comprador Verificado

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use it as a replacement part for my blade 230s (tail motor only) as it is way cheaper than the stock ESC. I just had to adapt the PID parameters of the receiver. In the end, it goes better than the stock part (very good tail behavior). It is very light and small so that I could place it in the original location.

Laurent | Comprador Verificado

  • Overall
  • Quality
  • Value

Very good ESC

Nov 10, 2020

I use this ESC as a replacement part in my Blade 230S for the tail motor (it is way cheaper than the stock part). It works very well and it is very light. I just had to modify the PID parameters of the receiver. It is quite small so that it can be placed in the original location. My heli flies as well as with the stock part.

Abu Bakar | Comprador Verificado

  • Overall
  • Quality
  • Value

Awsome mini esc

Sep 15, 2018

Have this attach with racestar 2506 2700kv, on my own build wing. Use 3s 1550mah/4s 1000mah. Auw just below 500mg. Flight time on both batteries almost 10min mostly 50 to 60 percent throttle.

Arquivos de clientes
turnigy-multistar-esc-manual.pdf Download [2]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!