New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Turnigy Multistar USB BLHeli Programador Para V2 Multistar ESC

Turnigy Multistar USB BLHeli Programador Para V2 Multistar ESC

Shipped From:
  • International (Hong Kong)

Now save guardar 0,00 € 0,00 €

6,52 €
Alert me
Estado:
Indisponível!
SKU:
9351000056-0
ETA:
No ETA At This Time [ ? ]
WANT FREE SHIPPING? Click here to find out more!

A ferramenta USB Multistar para todos V2 Multistar ESC do. recurso de Multistar ESC um ATmega MCU que abre a porta para cu firmware - A V2 Multistar vem com software BLheli pré-instalado, e para aqueles tão inclinado esta ferramenta fácil de usar USB está disponível para configuração e atualização através do BLHeli Suíte GUI. Isso permite que você reverter facilmente a direção do motor sem mudar os fios do motor, ajustar uma série de configuração para incluir a compensação Demag e tempo para motores Hi-KV com problemas de sincronização.

MultiStar CES é um controlador de velocidade de qualidade a um preço fantástico! Projetado para instalação simples e fácil configuração dessas CES têm provado para oferecer excelente desempenho quando usado em aplicações multi-rotor. Se você está começando no Multi-rotores e precisa de um fácil de instalar solução que é testada e comprovada para o trabalho com artesanato Multi-rotor, em seguida, estes controladores de velocidade tem coberto.

Para utilizar a ferramenta de programação basta baixar o software suíte BLHeli livre ligar a ferramenta USB no computador e selecione o comport, ao lado de ligar o fio de conexão do receptor do esc para a ferramenta USB e ligue para o esc. Imprensa conectar e ajustar os parâmetros conforme necessário e selecione flash e está feito.

Nota: A ferramenta é para a série Multistar V2 da ESC e usar com o software suíte GUI BLHeli, e não é compatível com outros esc de.

  • SKU 9351000056-0
  • Brand MultiStar
  • Capacidade ( mAh) -
  • Peso 15.0000
  • Comprimento 60.00
  • Packaging Width 10.00
  • Altura 10.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

turnigy buenos productos y bajo costos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

turnigy buenos productos y bajo costos

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering finish.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering finish.

LHeli with 15A Multistar ESC with Multistar USB Tool

- BLHeli: https://blhelisuite.wordpress.com/

- Multistar USB Tool with out reed wiere!

- De Multistar ESC feed with 5Volt from ext.BEC!

-
Settings BLHeli

1. install the driver

2. start BLHeli Suite

3. Select Amtel/Silabs Interface = 1 Amtel BLHeli Bootlader (USB/Com)

4. Plug in USB programmer into your computer

5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]

6. Select the correct speed (Baud 9600)

7. Connect ESC plug into USB programmer (without the red cable !!!)

8. Click on Connect

9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)
-
Eanable One Shot in BL Heli


- PWM Frequency/Damping = Light

- Motor Timing = High

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

LHeli with 15A Multistar ESC with Multistar USB Tool

- BLHeli: https://blhelisuite.wordpress.com/

- Multistar USB Tool with out reed wiere!

- De Multistar ESC feed with 5Volt from ext.BEC!

-
Settings BLHeli

1. install the driver

2. start BLHeli Suite

3. Select Amtel/Silabs Interface = 1 Amtel BLHeli Bootlader (USB/Com)

4. Plug in USB programmer into your computer

5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]

6. Select the correct speed (Baud 9600)

7. Connect ESC plug into USB programmer (without the red cable !!!)

8. Click on Connect

9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)
-
Eanable One Shot in BL Heli


- PWM Frequency/Damping = Light

- Motor Timing = High

Einwandfreie Funktion mit den 6A V2 Reglern.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Einwandfreie Funktion mit den 6A V2 Reglern.

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire of the USB programmer and to power the ESC from a BEC 5V.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire of the USB programmer and to power the ESC from a BEC 5V.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire and power the ESC from a BEC.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works fine.
I read config from my Multistar 10A V2; it was in version 11.7. I flashed with new version 13 of BLHeli and I adjusted some settings. The only trik is to cut the red wire and power the ESC from a BEC.

Procedure (to combine with LeBobo's MultistarV2 Pack ) :
1. install the driver
2. start BLHeli Suite
3. Set "ATMEL / SILABS" to "ATMEL 1-Wire Bootloader Interface"
4. Plug in USB programmer into your computer
5. Select the correct port: COM xx [USB SERIAL CH340 (COM xx)]
6. Select the correct speed (Baud 9600)
7. Connect ESC plug into USB programmer (without the red cable !!!)
8. Click on Connect
9. Click on ReadSetup and quickly connect Lipo at ESC (you have 2 or 3 seconds)

I use this USB programmer with Multistar 10A and I haven't got any problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this USB programmer with Multistar 10A and I haven't got any problem.

It is not a programmer for Multistar, it is a universal programmer from Multistar.
The stick has always worked with BLHeliSuite, with ANY Atmel based ESC, which has the small 512 bytes BLHeli bootloader flashed over ISP (and which do not have an inverted input, like the Multistar V1 ESC have). It has NOT been specially build for Multistar ESC nor is it somehow bound to work only with Multistar ESC.
All the negative reviews address the Multistar V2 ESC, not the this Multistar programmer.
As far, as it tested, it works great and is easy to use.
The best solderless ready-built adapter for the small 512 bytes BLHeli bootloader (or other 1-Wire AVRootloader solution).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is not a programmer for Multistar, it is a universal programmer from Multistar.
The stick has always worked with BLHeliSuite, with ANY Atmel based ESC, which has the small 512 bytes BLHeli bootloader flashed over ISP (and which do not have an inverted input, like the Multistar V1 ESC have). It has NOT been specially build for Multistar ESC nor is it somehow bound to work only with Multistar ESC.
All the negative reviews address the Multistar V2 ESC, not the this Multistar programmer.
As far, as it tested, it works great and is easy to use.
The best solderless ready-built adapter for the small 512 bytes BLHeli bootloader (or other 1-Wire AVRootloader solution).

Customer files
Connecting_ESC.png Download [601]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save