Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy Park450 Brushless Outrunner 1200KV

Generating Links

Turnigy Park450 Brushless Outrunner 1200KV

Preço:

Now save economize 0,00 € 0,00 €

18,31 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
Park450-1200
Envio Grátis? Clique aqui aprender mais!

Projetado para ser uma troca directa para fora para motores de tamanho Parque 450. Este outrunner brushless irá fornecer mais potência e tempos de execução mais longos com sua alta eficiência.
Um motor de qualidade, construído especificamente para aviões projetados para voar com motores de tamanho Parque 450.

Spec.
Bateria: /7.4~11.1V 2 ~ 3 celular
RPM: 1200KV
Max atual: 18A
Watts: 175w
Nenhuma corrente de carga: 11.1V / 1.1A
Resistência interna: 0,06 ohm
Peso: 66 g
Diâmetro do eixo: 4 milímetros
Dimensões: 28x37mm

Dados de teste:
7.4v - 10X4.7 Prop - 12A - 640g Thrust
11.1v - 8x4.3 Prop - 13.2A -800g Thrust

  • Kv ( rpm / v ) 1200.00
  • Correntes Max (A) 18.00
  • Resistência (MH ) 0.06
  • Max Tensão ( V) 13.00
  • Potência (W) 175.00
  • Shaft A ( mm) 4.00
  • Comprimento B (mm) 18.00
  • Diâmetro C ( mm ) 28.00
  • Pode Comprimento D (mm) 33.00
  • Comprimento Total E ( mm) 51.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

qqq | Comprador Verificado

  • Overall
  • Quality
  • Value

It's OK

Aug 26, 2019

Works well, just the wires are a bit weird, their insulation is quite loose.

Dominick | Comprador Verificado

  • Overall
  • Quality
  • Value

Update

Jun 16, 2018

Now that I have been using this motor for almost two months & many fliest , an update. The motor continues to run strong. Having reversed the prop shat so that it is the same as the pictured has worked without issue. Have continued to use a GWS orange 8/6 prop, 3 cell 20C Turnigy 3000ma battery , & 30amp ESC. One problem has occurred in regards to the 3 motor wires. It appears that the insulation on these wires is NOT bonded to the wire core. As a matter of fact very loose around the wire. I happened to notice on a pre flight inspection that the insulation on one of the wires has slipped well forward leaving exposed wire out passed the metal case by about 3/8" ( 6-7 mm ) . Had this wire touched the case a short could have occurred. I was able to slide the insulation back into the opening on the case. I then took some clear silicone & a tooth pick & worked it into the case opening. When this set up all was secure. I highly suggest doing this to your wires before the insulation slips. Had this not have happened I would have given 5 stars. Still a good strong running motor.

koolkid9000 | Comprador Verificado

  • Overall
  • Quality
  • Value

Best

Mar 27, 2018

This might be the best motor I have.
I've used it on many planes like the FT Simple Cub, two FT mustangs etc.
I am ordering a second one for a twin engine so i hope i wasn't just lucky.

Brian in Grand Forks | Comprador Verificado

  • Overall
  • Quality
  • Value

Great option for bloody wonders

Jul 25, 2017

Great power for foamboard planes, we are using this motor with a plush 18a ESC, APC 8x6e prop on 3S. The bloody wonders are pulling about 14A static at 140 watts WOT and weigh about 1 pound with this setup and 1500 mah battery. Combat/racing fights at full throttle last 5 mins.

Alpower | Comprador Verificado

  • Overall
  • Quality
  • Value

un po delicato

Dec 11, 2016

batt lipo 3s 1500 mah 20c , 30amp esc , nylon 8x5 prop , 650 grams combat profile , 5 min fling .
Però alla minima toccata si rompono subito i cuscinetti e si piega l'albero , è un pò delicato .

Aldo | Comprador Verificado

  • Overall
  • Quality
  • Value

Un po delicato

Dec 08, 2016

Montato su un combat profile 600gr con elica 8x5 apc e lipo 3s1500 5 minuti a fullthrottle , sale bene , però è delicato sia di albero che di cuscinetti , dura poco ma si sa ...... è un combat .

goldenhobbies | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2015

BEWARE! When Hobbyking has a problem with an order their customer service sucks BIG TIME. I have had about 4 orders that didn't ship for days because they were out of stock on an item that I ordered and their online ordering system said it was in stock. Then it takes days for them to resolve the issue. If you are in a hurry for a big order, go elsewhere.

__:-) | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 18, 2015

Probably the nicest quality motor I've had from HK: no slop, good thick shaft and big bearings. The quality of the machining is excellent and the motor appears to be well balanced and smooth. Overall a very nice wee motor.

zejackal | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 30, 2015

A perfectly good motor for the price.

Tim | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2015

Great motor, tons of power. I am using it as a replacement on my Pz P-51 gunfighter and i get full vertical with a 9-5 Prop.

  1. 1
  2. 2
  3. 3
  4. 4
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios