Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

Turnigy Sentilon100A HV 5-12S BESC (ver4)

Turnigy Sentilon100A HV 5-12S BESC (ver4)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
212 g
SKU:
TR_S100A-HV
Descrição
do
Turnigy Sentilon 100A HV 5-12S Speed ​​Controller (Versão 4)
O Sentilon 100A HV pode lidar com 12 células LiPoly em série, isso é 36 células NiMH!
Este BESC deve a sua capacidade de alta tensão para os EUA importado MOSFETs Fairchild utilizados e compnentry alta qualidade.
Agora com uma CPU 12MHz ultra-rápido. Faster relógio ciclismo prevenção da perda de sincronização com alguns grandes motores *
Garantia de 12 meses, os BESCs série Sentilon estão garantidas contra fabricação defeituosa e componentes de baixa qualidade.

Cont atual: 100A
Explosão atual: 110A
Modo BEC: N / A (sem BEC)
As células Lipo: 5-12
NiMH: 15-36
Peso: 125 g
Tamanho: 60x60x11mm
CPU Clock Speed: 12MHz
AVISO: Para alguns motores grandes, você deve usar o modo de sincronismo 'High'. Não fazer isso irá resultar em uma esc queimada.

Programável pelo usuário, tanto através do controlador e cartão de programação opcional. O cartão de programação é um excelente produto, uma vez que instantaneamente informa ao usuário as configurações atuais e com apenas alguns cliques simples dos botões, o usuário pode alterar as configurações e ter tranquilidade gráfica dessas alterações.
O cartão de programação é um item excelente e simples de usar!
* Perda de sincronização ocorre quando a CPU de um CES não pode controlar os 3 conexões com rapidez suficiente para continuar a sincronização com o motor. Muitas vezes descrito como um ruído estridente, perda de sincronismo vai causar uma perda súbita no poder até o CES pode recuperar o tempo com os pólos motores e cair de volta para Sync. Este fenómeno não é uma falha de esc, em vez de uma incompatibilidade com o CES, Motor, número de células e velocidade prop e, geralmente, só já ocorre em grandes motores.
O Turnigy 100A Sentilon agora dirige uma CPU 12MHz, o mais rápido no mercado! Garantir sincronia perfeita com o mais rápido dos motores e snappiest dos movimentos do acelerador!
Product
Specifications

Características do Produto

  • SKU:
    TR_S100A-HV
  • Brand:
    Não
  • Peso ( g )
    212.00
  • Comprimento
    182.00
  • Largura:
    20.00
  • Altura:
    145.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to set up using the programming card. I am using an 8 cel set up with a 325KV motor - 17x12 APC prop. Over 20 runs with no problems. The only problem I am having is trying to program a throttle curve on a Futaba 8uaps Tx to give more power lower down the curve. When the Tx mix is activated it goes to full power at 25pcnt throttle. Any thoughts? Hence only three points for quality, but good value overall.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
exelent controleur quipe mon f3a il est coupl avec un xpower f3a
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Upgrade info I received from HK:
The ESC that you received seems to be upgraded version with same specifications, however it comes with antispark (the red lead has special anti spark resistor in it) and the capacitor set that you named as battery is designed to remove ripple current going from the ESC to receiver, added, third capacitor increases motor running smoothness, run the ESC and enjoy!

I used the programming card to set for 8s voltage cut off. The ESC works well (EF Power 90, turning an APC17x10 for Pattern use). After 8 ground runs it delivers a smooth power response and no overheating.
The only negative I would note would be that this ESC it is not compatible with my Futaba 8UAPS Tx throttle curve mixing, or reverse setting. Better to use the throttle exponential option to set the power curve. Otherwise, I would say good value for $.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect... cheap, and does a wonderful job on a rotomax 50cc-electric replacement :-).
there is only one downside to it, that is the manual, that doesn't clearly indicate how to program it... It was a hell of a job to enter the program-mode with a orange-rx...
So I switched over to 35mhz to program it. Afterwards I've found the 2.4ghz-trick, branching the cable to channel 1 -30seconds after adding the battery to the receiver did the trick(with full throttle at transmitter of course)... Seems like 2.4 needs some additional time :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this ESC to a Turnigy Rotomax 1.60 .. while programming it in high timing mode ... during the first test at home .. stopped and caught fire ... they are a waste of money
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hallo
Das ist mein 8er Regler von Turnigy, und bin mal wieder sehr Zufrieden Prei-Leistung findet man kaum was besseres.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
mal producto, se me quemo al mes de usarlo, estoy intentando ver sim me lo reconocen por la garantia no se que va a pasar!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Purchased this unit from a friend who had a valid order number from HK. Brand new out of the sealed package and would not arm.....not matter what configuration. Contacted warranty and they would do nothing because it was more than a year, regardless of all the problems HK has had with this unit, even the chip had the ID grinded off to conceal its origin!. Defective product. Would never purchase another one again. Great pricing.....horrible customer service!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good ESC

Using it on an electric scooter. 8s 16A/H battery pack. Made a modification to the heat sink though. I know this probably wont help any helicopter guys (or maybe it will). Attached a bigger heat sink with a cooling fan. After multiple full throttle blasts, ESC just slightly warm to the touch

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
would like to advise all those who buy this particular esc
chrisimopioisoun not never, ever the governor has done tests by highly experienced technicians and here in Greece.
With the governor's vbar works fine.

I challenge everyone to try, not only for this esc but for the 120HV OPTO
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Customer files
user_manual download now [2313kb]

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.