Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Turnigy SK8 6374-149KV Sensored Brushless Motor (14P)

Generating Links

Turnigy SK8 6374-149KV Sensored Brushless Motor (14P)


Now save economize 0,00 € 0,00 €

103,19 €
Enviado de:
  • USA
  • International (Hong Kong)
Já comprado
Em estoque
Envio Grátis? Clique aqui aprender mais!

The Turnigy SK8 6374-149KV Sensored Brushless Motor is ideal for Electric Skateboard Conversions but can be used in many other applications that require a strong sensored brushless motor.


KV: 149
Max current: 80A
Max Power: 3500W
Idle current: 1.3A
Resistance: 43MΩ
Shaft: 8mm
Weight: 937g
Cell count: 8~12s LiPo (Voltage)
Bolt holes spacing: 44mm
Bolt thread: M4
Connection: 4.0 banana Gold plug

Shaft A: 8mm
Length w/ hubs B w/o shaft: 80.7mm
Can Diameter C: 61.0mm
Can Length D: 67.0mm
Total Shaft Length E: 126.7mm

  • Kv ( rpm / v ) 149.00
  • Correntes Max (A) 80.00
  • Resistência (MH ) 43.00
  • Max Tensão ( V) 45.00
  • Potência (W) 3500.00
  • Shaft A ( mm) 8.00
  • Comprimento B (mm) 80.70
  • Diâmetro C ( mm ) 61.00
  • Pode Comprimento D (mm) 67.00
  • Comprimento Total E ( mm) 126.70

Dimension Diagram Guide

  • attributeset-10


Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:

Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:

Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Lukas | Comprador Verificado

  • Value
  • Quality
  • Overall

Great motor for reasonable price

Oct 28, 2019

Used it on my E-scooter for quite some time now(over 500km) and can verify that this is real deal. Running at 53A FOC on 12S battery with modded Vesc 4.12. Annoying thing that at higher speeds motor is quite loud, small bearings... I hope they won't fail soon as this motor is almost non-repairable. Screws will strip before loosening. Cannot use heat to burn loctite off as there is magnets on the rotor outside.

Santino | Comprador Verificado

  • Value
  • Quality
  • Overall

Quality and Price perfect combo

Jul 31, 2019

Great overall motor. Quality/Price it is excellent. Using them on Vesc6+, 55 max amp (At 80amps stator get overload), but increasing the exponential throttle to 30 positive to accelerate and 0.10s positive ramping, make them great for my DIY Hybrid build. Wish they made a version with bigger stator. Very happy with my purchase.

yann | Comprador Verificado

  • Value
  • Quality
  • Overall

size bad

Jul 18, 2019

je les ai pas encore montés , j'attend la focbox unity . Mais la taille n'est pas la bonne . Ils mesurent 6390.....Pas 6374 ni 6380

Bram | Comprador Verificado

  • Overall
  • Value
  • Quality

Overall Powerful Motor for good price

Mar 13, 2019

I'm using this Motor now in my Lathe. Because of high max voltage (I use 48V now) and low KV it's a strong BLDC that can push out some power at lower speeds.
Some comments: when I wanted to find out which sensor wire corresponded to which motor wire, I noticed that opening this motor is not a good idea. Most screws will be destroyed before they come loose, they are glued in place. So repairing it yourself if probably not an option. Fortunately I was able to find out the wiring without fully opening the motor.
Works well with VESC in FOC mode. On high speeds it's still a bit loud for my taste, on lower speed it's very quiet. For the rated power, I find it has small bearings, I would have preferred bigger ones, that might also help with the noise on higher speed. But overall it's a very powerful motor in a small package that is a very good fit for my mini lathe.

Excess | Comprador Verificado

  • Overall
  • Value
  • Quality

Awful quality control and shipping

Jun 29, 2018

The package I received was destroyed and there was nothing protecting the motors. The motors look like they’ve been through war. They are also have spots of sticky gunk all over them. I don’t know if that’s from something leaking in the destroyed packaging or if I was sent a return. Cosmetically these “new” motors are a 4 out of 10. 10 being what a new product should look like.
I haven’t hooked them to power yet as I’m hoping someone gets back to me about the damage first.
100% disappointing.

Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!