New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Turnigy Super Bright LED de Baixa Tensão dispositivo de alarme

Turnigy Super Bright LED de Baixa Tensão dispositivo de alarme

Shipped From:
  • USA
QTY:

Now save guardar 3,01 € 3,01 €

Special Price 6,12 € 6,12 €

You save guardar 3,01 € 3,01 €

Was  9,13 €

Estado:
Disponível
SKU:
9107000349-0
WANT FREE SHIPPING? Click here to find out more!

O alarme de baixa tensão LED Turnigy Super Bright lhe dá um aviso bem visível, por meio de um sinal intermitente rápido quando a tensão do seu bloco de poder (LiPoly) cai para 3,5 volts, permitindo-lhe recuperar o seu modelo valioso com segurança antes do corte de baixa tensão ativa .
Com os dois modos de LED simplesmente mudou, pressionando o botão na unidade de controlo e ligações de longa LED, o dispositivo é simples de instalar e operar.
O dispositivo é activado ao ligar o cabo de alimentação a uma tomada equilíbrio em sua bateria LiPoly, tendo o cuidado de observar a ie polaridade. o condutor negativo na liderança liga ao terminal negativo na ficha equilíbrio.

Características:
• LEDs Super-brilhantes.
• constante selecionável ou piscando modos de LED.
• Facilmente adaptado a todos os tipos de veículos.
•Tamanho compacto.


especificações:
Tensão de entrada: 3.3V ~ 7.4V
LED de energia: 1W, 350mA (cada)
LED cor: vermelho e verde
LED temperatura de cor: 5000-7000K
LED Fluxo luminoso: 80 ~ 100LM
LED comprimento do fio: 600 milímetros
Tamanho Controlador: 44x21x7mm (CxLxA)
Peso: 15 g


  • SKU 9107000349-0
  • Brand Turnigy
  • Capacidade ( mAh) -
  • Peso 24.0000
  • Comprimento 90.00
  • Packaging Width 30.00
  • Altura 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Review Update: lipo does get a bit out of ballance, but it aint that bad at all for normal use. When you have the LED's on and just let the model sit there without flying around you get more out of balance. For normal flight it's just fine. Gave it 5 stars now as I like this a lot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review Update: lipo does get a bit out of ballance, but it aint that bad at all for normal use. When you have the LED's on and just let the model sit there without flying around you get more out of balance. For normal flight it's just fine. Gave it 5 stars now as I like this a lot.

Be aware this will only work properly on 1 or 2cell lipos. You can use it on lipos with more cells BUT it wont monitor them and will unbalance the lipo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Be aware this will only work properly on 1 or 2cell lipos. You can use it on lipos with more cells BUT it wont monitor them and will unbalance the lipo.

Got mine and it has the same board as the version with 4 leds: PRODUCT ID: 9107000354-0 so you can easy connect 2 extra LED's like the 2 x White Add On LED Light Set. The LED's are 1W 350ma and are very bright, good visible in daylight. The connector is the only thing I don't like, it only reads the first 2 cells and a lipo gets a bit out of balance when used. but with it you will be able to connect it to any lipo you want. You can always solder a normal JST-XH connector to it for a more easy and foolproof connection.
See video: https://www.youtube.com/watch?v=iVJGQ24PSgQ (if blocked try vimeo!)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got mine and it has the same board as the version with 4 leds: PRODUCT ID: 9107000354-0 so you can easy connect 2 extra LED's like the 2 x White Add On LED Light Set. The LED's are 1W 350ma and are very bright, good visible in daylight. The connector is the only thing I don't like, it only reads the first 2 cells and a lipo gets a bit out of balance when used. but with it you will be able to connect it to any lipo you want. You can always solder a normal JST-XH connector to it for a more easy and foolproof connection.
See video: https://www.youtube.com/watch?v=iVJGQ24PSgQ (if blocked try vimeo!)

Great product gives you Super Bright lights that are visible over several hundred meters even in bright sunlight especially if you replace the green light with white, it also flashes when the battery is getting down to minimum.

NOTE: I would recommend balance charging batteries used with this product as it does cause Cell #1 to get out of balance with the other cells if you don't.

The benefits of using it far outweighs the inconvenience of always balance charging.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product gives you Super Bright lights that are visible over several hundred meters even in bright sunlight especially if you replace the green light with white, it also flashes when the battery is getting down to minimum.

NOTE: I would recommend balance charging batteries used with this product as it does cause Cell #1 to get out of balance with the other cells if you don't.

The benefits of using it far outweighs the inconvenience of always balance charging.

I bought this for my BW260, It works great. LEDs are highly visible even in broad daylight. LED will blink faster to indicate low level battery voltage. I use this with a 3S battery by the way.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this for my BW260, It works great. LEDs are highly visible even in broad daylight. LED will blink faster to indicate low level battery voltage. I use this with a 3S battery by the way.

I Tested this low voltage alarm on a 3 cell li po battery and it worked fine. it has a three pin plug on it so it only monitors 2 cells i beleive. the leds started to flash rapidly when the voltage dropped to 3.8 volts . i now have it fixed to a piper cub and hope to have some long flights soon as the wheather improves.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I Tested this low voltage alarm on a 3 cell li po battery and it worked fine. it has a three pin plug on it so it only monitors 2 cells i beleive. the leds started to flash rapidly when the voltage dropped to 3.8 volts . i now have it fixed to a piper cub and hope to have some long flights soon as the wheather improves.

Customer files
No File Name Download [1957]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking