Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

Quadro Turnigy Talon Carbon Fiber Quadrotor

Quadro Turnigy Talon Carbon Fiber Quadrotor

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
675 g
SKU:
9323000001

Combine

essential items and
esc
motor
acc
Descrição
do

Se você está procurando uma grande final, nenhum quadro Quadrotor compromisso com olhares que poderiam matar, o Talon é para você!

O quadro Quadrotor Turnigy Talon é um quadro de fibra de carbono de alta qualidade que oferece tanto uma grande procura e desempenho. Construído a partir de peso leve mas extremamente rígida liga de fibra de carbono e alumínio, o Talon oferece uma grande combinação de redução de peso e força.

O Talon apresenta um quadro bem acabado de fibra de carbono principal e braços, todos ligados em conjunto com peças em ligas de alumínio. Este quadro realmente dá o seu quad uma alta tecnologia e qualidade olhar.

Nós também oferecemos uma linha completa de produtos eletrônicos quad tais como Quadrotor placa de controle, ESC, motores e mais, e isso nunca foi mais fácil ou mais acessível para obter um quad no ar!

Todo o hardware necessário está incluído.

especificações:
Peso: 240 g
Largura: 498 milímetros
Buracos Motor Parafuso: 22 ~ 32 milímetros

Product
Specifications

Características do Produto

  • SKU:
    9323000001
  • Brand:
    Turnigy
  • Peso ( g )
    675.00
  • Comprimento
    526.00
  • Largura:
    43.00
  • Altura:
    150.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Never really got it to work properly. Used spirit level on each motor mount and tightened them in the right position, but the motor would rotate on the axis when theres a rough landing. Tightened the bolts as much as i could before they stripped but nothing is helping.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this frame for my first quadcopter project. Was surprised to find only three legs instead of four seperate legs. Due to one of the legs having to cross the entire space between the bottom and top plate there is hardly any space left for wiring or placing your esc units. Would be better if it was possible to place them there because on the top you will be placing your board and perhaps your battery checker.

Due to this flaw, you are forced to mount the esc to the legs and since you have no mounts or flat service, they need to be strapped down.

I was planning to place a gopro on it also but this will not be easy because there is simply no space anywhere on the top plate.

Due to the lack of space you will also run into problems sorting out your wiring and how to direct it to the battery connector.

Still it is not a bad beginners frame but it would have been nicer if the bottom plate was the same size as the top plate.

Frame itself is easy to put together and looks very sturdy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this before the V2 came out, and essentially made the V2 by purchasing some spare parts. An extra top plate, standoffs, and short tubes makes it very close. I used the Bottom plate with some long standoffs to hold a 4S battery under it, and it just clears the landing gear. That also allows me to attach large landing skids to that plate, for gimbal, camera, etc. I just bought the V2 mounting blocks and standoffs, which should make it a little stiffer.

Using 4108-600s on it, 10x4.5 works ok, 12x4.5 works better.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've modified this frame quite a bit to fit my needs but the base is light weight and affordable. Both good in my book. This frame is used in a long life fpv explorer quad, which carries a 6000mah battery. A second one is use in a snappy sport quad which I use to grow my skills. Since this frame is so economical I don't cringe when it hits the floor after a failed flip.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Images of my build <a href='http://www.hobbyking.com/hobbycity/store/uploads/929869055X1632255X52.jpg' target=_blank>build1</a>
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
High quality Frame and easy build. I was able to build this frame in 3 hours. Well worth the $29.99 USA price. Highly recommend this frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Looks ok at a glance, one of the copper screws broke upon tightening, check it out here http://peterwedege.blogspot.dk/2014/12/turnigy-talon-carbon-fiber-quadcopter.html
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
High quality carbon fiber with a nice appearence. Easy assemble and quite light. Well done HK, highly recommended product!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this frame a a starting point for my mods and it looks fantastic. The materials are of good quality and light. I will replace some parts and add motor mounts (you cannot mount 16x19 motors directly).
I also added an x-shaped 3d printed piece joining the three tubes in the middle (one long and two short) to make it more rigid. I will 3dprint extensions on top of the baseplate, which is extremely rigid.
I was thinking about building a frame myself from scratch; but checking the carbon tube prices I decided this is the best way to go.
Impressed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
working good so far, about 18 minutes running 2213-980kv motors with 20amp ESC's and KK2.1.5 on talon carbon fiber quad frame powered by 2200mah 3s 25c.,
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
esc
motor
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.