Estados Unidos
Shipped From:
  • United Kingdom (UK)
  • United States (US)
  • International (Hong Kong)
  • Australia (AUS)
  • Europe (EU)

Turnigy Talon Hexcopter (V1.0) moldura de fibra de carbono - 625 milímetros

Turnigy Talon Hexcopter (V1.0) m...

O quadro Turnigy Talon V1.0 Hexcopter é trabalhada a partir de alta qualidade fibra de carbono genuína oferecendo ambos grandes aparência e desempenho. Nossos engenheiros se propôs a criar um quadro Hexcopter sem compromisso, vários materiais for...

Now save guardar 13,02 € 13,02 €

Special Price 52,10 € 52,10 €

Now save guardar 13,02 € 13,02 €

Was  65,12 €


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Visão geral

O quadro Turnigy Talon V1.0 Hexcopter é trabalhada a partir de alta qualidade fibra de carbono genuína oferecendo ambos grandes aparência e desempenho. Nossos engenheiros se propôs a criar um quadro Hexcopter sem compromisso, vários materiais foram testados e rejeitados até que decidiram que só fibra de carbono genuína iria cumprir as metas que estabelecemos para fora para conseguir. Cada componente foi pesado e medido barbear meros gramas sempre que possível para alcançar um peso leve ainda quadro extremamente rígido. Nós não permitir que nenhum compromisso e você também não deveria.

A capacidade de elevação adicional de uma configuração hexagonal torna este quadro ideal para transportar cargas maiores, como sistemas de câmeras e outros componentes eletrônicos. Isto faz para um equipamento de câmera excepcional ou simplesmente um quadro multi-rotor muito ágil e poderosa para acrobacias!

O Talon Hexcopter é construído a partir dos mesmos componentes de alta qualidade que são utilizados na imensamente popular quadro Talon V2 Quadrotor, mas temos re-desenhado o quadro principal para o uso em uma configuração hexagonal.

Durante o desenvolvimento do V2 Talon nossa equipe tomou a moldura Talon já popular e estudou o projeto, com base no feedback da comunidade multi-rotor e as nossas próprias ideias nós re-desenhado a montagem de placas que permitem a montagem superior ou inferior, de 28 e 35 de motor motores brushless outrunner tamanho (ver fotos de referência de diferentes opções de montagem). O sistema de fixação melhorada sozinho sofreu 3 re-designs até que nossos engenheiros estavam satisfeitos que a força perfeita e combinação de redução de peso tinha sido alcançado. O sistema de fixação Centro quadro foi quase dobrou de tamanho para assegurar uma forte cinta em cada barra. Todos os aspectos deste quadro foi exaustivamente analisada e pensada.

Toda esta atenção ao detalhe resultou na simplicidade elegante que é o Talon Hexcopter, um quadro Hex que somos tão orgulhosos de colocar o nosso nome por trás de como você vai ser ao próprio.

Nós também oferecemos uma linha completa de produtos eletrônicos de qualidade multi-rotor, tais como a placa multi-rotor controle, ESC, motores e muito mais, por isso não há necessidade de comprometer a sua configuração eletrônica quer!

Peso: 440g (w / out do sistema eletrônico)
Largura: 625 milímetros
Buracos Motor Parafuso: 16/19 / 25mm

28-XX ou 35-XX motor brushless outrunner x 6
18 ~ ESC 25A brushless x 6
8x4 ~ hélice 10x4.7 x 6 (3 padrão de rotação / 3 reverso)
placa de controle multi-rotor
2500 ~ 3300mAh 11.1V lipoly
4CH Transmissor e Receptor


Características do Produto

  • Contagem de lâmina:
  • Diâmetro X ( Inch):
  • SKU
  • Watt Hour
  • Peso ( g ):
  • Comprimento:
  • Largura
  • Altura

Escreva a sua análise

Apenas utilizadores registados podem criar análises. Por favor, inicie sessão ou registe-se

Looks very good quality and sturdy but I haven't built it yet.
Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.
I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.
If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.

great frame with mainly good points have built a fairly serious one and the only problem I have found is although the frame is extremely crash resistant (have had some very hard ones) the clamps that hold the arms in the centre of the hub have a tendency to come loose so getting them tight takes time as parts settle and a gentle hand for getting the right amount of torque on the little m3 screws without stripping the aluminium tube nuts that hold it together however after a few hours flight and a few crashes parts seem to settle and stay tight AND THE MAIN THING YOU NEED TO KNOW is that the aluminium motor mounts at the end of the arms bend quite easily on high angle crashes while this isn't a problem if you can straighten them without snapping them but they are ten dollars each in the spare parts selection on hk .soooo with a frame selling for 80 dollars its a no brainer to just buy a whole new frame then you get a whole new frame in spares because you WILL bend those motor mounts otherwise a very good frame im happy with mine
Good workmanship, everything fits well and is quickly assembled.
This is an extremely nice kit. I own the Carbon Quad, X525, and plastic/glass quad. The Carbon Quad and this Hex Quad are by far superior and worth the extra money.

The carbon fiber is real carbon fiber, not the fake sticker stuff. The metal pieces are super light and work very well. Overall the kit fits together very nicely and is well put together. The 3 motor mount holes makes it easy to fit multiple types of motors. Currently I have the 350KV's on my Hex and the 750 KV's on my Quad. I think I prefer the 750's.

I really like that you can run the motor wires through the arm tubs for a cleaner looking craft. That is a real bonus. Keep in mind that carbon fiber is conductive so you will need to isolate your wire ends with heat shrink, tape or something to protect the leads from shorting against the carbon fiber.

The Hex is quite light for its size and is extremely sturdy. The only thing that would make it better is to have instructions, but it is easily figured out by looking at pics.

-Looks really good
-Can run motor wires through tubes
-Has 3 motor mount hole configurations
-Ample space for electronics
-Easily assembled
-Can custom adjust configuration

-No instructions
I got the same hex copter u got but the speed controlers I soderd all the black together and the red and wire the goes to the kk2 board to the main deans plug .is that ok or did I mess up.i saw it on u tube that u can soder all the black and red together to the deans plug
or do I need a power board . HELP ME
View all reviews
  • Turnigy Talon Hexcopter Frame

Upload video

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.