Turnigy TG9, 9 gramas micro servo.
Tamanho: 23x11x29 mm
Tensão: 3V ~ 6v
Peso: 9 g / 0,32 oz
Velocidade: 0,12 seg / 60 (4.8V)
Torque: 1,6 kg-cmTrabalhando Temp: 30C ~ 60C
Teflon bucha, fio de 19 centímetros, motor coreless
Servo braços e parafuso incluído
Este produto foi testado e aprovado pela CE.
Características do Produto
Peso ( g )
Speed ( Sec / 60deg )
Torque ( kg) ( min. 0,01 kg )
Unit Weight (g):
A ( mm ):
C ( mm )
D ( mm ):
E ( mm):
F ( mm )
So its a nice little package and looks nice, good for the price and what not. But....... It really is what you pay for.
Very slow no good for any fast aerobatics. I got 4 and everyone i got was at different speeds. Then i noticed the sticky goopy looking muck they put in for grease. Took all servos apart and cleaned the goop out getting rid of lots of unwanted friction. Now they are a little faster. Remember though they are strong.great servo's, use 4 of them in my scale 450. since im failry a new pilot, i use one on the tail as well, works great no complaints!These servos are great for foamy's. If the nylon gears strip( which you must have hit the ground hard) then replace ment gears are here.This is a good servo. I bought 10 of them but 1 worked out. O do not believe that the speed is at 0,12 sec. It's similar to HTX900 but not the same. Also, is a good servo at this cheap price!High quality servo! Great for shockflyers and small foam planes!well, I bought four of these babes, tg9 and four tg9e. The economical version worked pretty good, one of the four TG9 NEVER worked. I think it's part of the risk buying on the other side of the world. In the other hand they don't center very well but that's not problem. Please turnigy have a better control in your quality.I bought 12 of these servos Used 5 , some noisy some move different than others so I had to match them. I bent the airplane and took the gears out of three. I tried to get 12 sets of gears from HK and they don't even know if they sell them. Does anyone know of gears that I might buy? My servos have two flights on them.Slow servo. Depending on what you are using it for might not be fast enough. Good value but slowThese are not very good. teh HXT-900 is 100x better. these Turnigy TG9 do not center well at all and will make you plane fly poorly if used on surfaces - ailerons, elevator, rudder. they area also slow. I bought 4 and all 4 were the same. for the same price get the HXT900's.
One thing I like them for is retracts, as they are slower and you don't need a retract to center.Schner Servo, klein und arbeitet, dazu noch preiswert. Selbst nach Absturz arbeitet er noch ohne Probleme.
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!