Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • International (Hong Kong)

Turnigy ™ TGY-6114MD Digital Sail Winch Servo (Tambor Type)

Turnigy ™ TGY-6114MD Digital Sail Winch Servo (Tambor Type)

Now save guardar 0,00 € 0,00 €

46,36 €
Indisponível!
Stock:
OUT OF STOCK
Peso:
105 g
SKU:
9295000014-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrição
do

Um poderoso alta especificação vela digital de servo de guincho com engrenagens de metal que podem ser programados para operar a partir de 1 a 6 voltas (controlado pelo ajuste ponto final). Este servo de vela guincho pode operar até um 14,5 kg impressionante de torque por isso é perfeito para os iates maiores.

especificações:
Acontece: 1-6 programável
Faixa de tensão: 4,8 ~ 6.0V
Velocidade: 0,72 ~ 360 ° 0.60sec
Torque: 12.32 ~ 14,5 kg
Ociosa atual: 0,12 ~ 0.14A (sem carga)
Corrente de trabalho: 0,40 ~ 0.50A
Stall atual: 1,80 ~ 2.20A
Engrenagens: Metal
Tamanho: 40,3 x 20,3 x 38,7 milímetros
Diâmetro do cilindro: 35,5 milímetros
Peso: 61 g
Conector: estilo JR com 265 milímetros comprimento do fio

Product
Specifications

Características do Produto

  • SKU:
    9295000014-0
  • Brand:
    Turnigy
  • Peso ( g )
    105.00
  • Comprimento
    95.00
  • Largura:
    35.00
  • Altura:
    75.00
  • Speed ​​( Sec / 60deg )
    0.60
  • Torque ( kg) ( min. 0,01 kg )
    14.50
  • Unit Weight (g):
    61
  • A ( mm ):
    44.00
  • B (mm)
    40.00
  • C ( mm )
    42.00
  • D ( mm ):
    20.00
  • E ( mm):
    58.00
  • F ( mm )
    27.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good value good replacement for drum sail winches.
Note must use computer aided radio to set end points and
turn radio on before boat and turn boat off before radio.
used on Marblehead rc sailboat with A-Rig on in 12 to 15 knots
of wind winch had no problems sheeting in the rig even though
the boat was over powered conditions were B-rig borderline C-Rig.
mike
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, I bought 2 of these (1 for a spare) and found that unless you can programme them, they can cause a lot of model damage. For example: The winch works fine if the servo pulse is KEPT between the accepted standard of 1 to 2 mS. With both of mine, if a pulse gets down to around ).8 mS, the servo will CONTINUE to rotate until something breaks. An example where this might happen is with the Turnigy 6XS Tx, whose throttle (winch) output goes to 0.75 mS if the radio is switched on without the throttle stick at "idle"...Crunch! Also, with the end travels set at 100pcnt, all chanels go outside of the magic 1 to 2 mS "standard".

Please, HobbyKing, bring on the programmer/instructions. This is not a cheap servo and can do a lot of damage, if travel cannot be limited.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.