Become a Dealer Blog
Registar

Preço total

0,00 US$

Carrinho de compras 0 Carrinho de compras 0 Loading...

Escala Esporte Aircraft RV-4 Balsa de Van, Glow / 1.600 milímetros EP (ARF)

Generating Links

Escala Esporte Aircraft RV-4 Balsa de Van, Glow / 1.600 milímetros EP (ARF)

 
Preço:

Now save economize 0,00 US$ 0,00 US$

96,18 US$
Já comprado Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
437000004
Envio Grátis? Clique aqui aprender mais!

Acessórios

O RV-4 é um dos mais bem sucedida e best-seller "home-constrói" no mundo, o RV-4 é um avião acrobático que é bem capaz em termos de cross-country, na verdade, este modelo particlar baseia-se na RV-4 usado por Jon Johanson para seu famoso Millenium 2000 volta do vôo do mundo Solo.

Esta grande procura ARF é construído usando um semi tradicional construção sheeted light-ply / balsa para uma combinação de baixo peso e força. A cobertura é impresso para dar um acabamento elevado detalhe que inclui linhas de painel e rebites, enquanto o acabamento de alto brilho faz para fácil limpeza e excelente durabilidade. O RV-4 é fornecido com um kit de hardware muito abrangente que inclui um único motor / motor firewall do sistema de montagem para ambos brilham ou energia EP trens, um girador da liga, tanque de combustível e Montagens de motor, pesados ​​e anodizado gancho e varetas, etc. o RV-4 também é prático, a cauda é removível e as asas são um plug no arranjo, o modelo também apresenta principal robusta sub-transporte e uma roda de cauda orientável.

O RV-4 apresenta todas essas attibutes você iria procurar em um grande modelo de esporte, um peso voando luz combinada com uma área de asa generoso para as características de voo ainda ágeis previsíveis, abas para manipulação excelente velocidade lenta e, claro, robustez e praticidade, jogar em a grande procura de escala, o alto nível de hardware incluído eo preço muito atraente, é bastante claro o RV-4 é um roubo!

Características:
• Construção leve
• Impresso Cobrir com alto nível de detalhe
• Robust Sub-Carriage
• Kit Hardware Comprehensive incluído
• Brilho ou Energia Elétrica
• Construir Rápido
• Plug In Asa

especificações:
Envergadura: 1600 milímetros
Comprimento: 1190 milímetros
Peso: 3000g

exige:
Sua própria 6 Canal TX / RX
7 x Std Servo (6 x para a versão EP)
0,46 ~ 0,52 brilho motor de dois cursos
42 milímetros Motor 600kv ~ 650kv (EP Version)
3300mAh ~ 4000mAh 4s Lipo Battery (EP Version)
60A OPTO ESC (EP Version)
bateria RX
RX On / Off Switch
UBEC / Regulador se aplicável (Lipo RX Bateria)

  • Van's Aircraft RV-4 Sport Scale Balsa
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

kekelala | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2013

Ok here again, action speaks louder than words! You will see so e loops, rolls, stall turn, inverted and half-assed knife edge etc.

radiobirds .com /?articleID=66&type=article (please omit spaces)

kekelala | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2013

http://radiobirds.com/?articleID=66&type=article

See it flies, action speaks louder than words!

kekelala | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2013

Looks as good as it flies and flies as good as it looks. 15cc gas used with 15x6 prop. Flies slow, lands slow. No bad habit. Low stall speed even with the weight of gasso and 100g of lead on the tail. Elevator push rod has some friction but it was rectified by changing them to full metal push rods. Flaps are redundant but sure can slow down the landing speed. Servo tray flexes easily, but not a 3D plane so I don't care much

pejay | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2013

Further to my earlier review - I flew the plane today and it is a great flyer. I leveled out all control surfaces before flying and it flew "out of the box" with no trims needed. I used the recommended motor NTM 4248/650 kV and prop 14x6. With 4S, 3000 mAh it drew 45A and gave a torque of 3 kg which is same as full weight of plane with battery. It is a very forgiving plane, easy to fly almost like a trainer. Only small problem- the supplied wheels are off center and too large for the wheel cover so I recommend installing slightly smaller wheels. Still as I said in my earlier review, the plane is a true bargain, very nice looking with lots of details as well as a great flyer. A grand 5 crowns version

iwade | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 29, 2013

I have just received mine and just started assembly so not flown as yet.
First impressions- it looks very quality and well presented. People who are speculating if it is an old V-Mar model I can tell you the instruction book is V-Mar dated 2002!
The model gives the impression of one of the very early Chineese type kits altho I think V-Mar made in Vietnam. Very impressed with the standard of the hardware package - for a change! Very nice anodised and colouerd alloy horns and push rod connectors. And a very clever EP conversion power pod module.
However as I started the assembly the very poor quality control at the factory became evident. Very nice F/glass wheel pants but when fitted to the fibreglass undercarriage the wheels will not revolve - they catch on the inside top of the wheel pant. I can only think of a smaller size wheel being the fix for this? I have left the pants off in the meantime.
When fitting the tail plane - the factory has left the slot in the tail joined with a block of balsa so the tail plane won't slide into the slot. I had to saw this block out and then sand the slot smooth. The little metal fitting that slots into the rudder to activate the tail wheel is not glued in .
The main wings have a wooden dowell locating peg at their trailing edge which fits into the fuselage. Mine only had one dowell in one of the wings and it was about 5 sizes too big and had

pejay | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 27, 2013

Kit arrived and as always in good condition. Workmanship of the plane is truly very good except for one thing. The white cover is semi transparent. Prints on the cover is excellent so I wonder why manufacturer did not use a white opaque covering film. You can actually see it on the pictures here if you look closely - you can see the balsa/ply structure on body and wings. One great feature- the landing gear is mounted with shock absorbing rubber inserts. But it seems from the manual that battery mounting is not so clever using a plywood box mounted to the firewall. Not sure if need to remove the cowling to install battery. But will see how it can be done in an easy way once I build the plane. Another feature not mentioned in the description - it comes with the pilot and a great looking 3D instrument panel. I am not sure if pilot is supposed to look like Jon Johansen whom I think is od Scandinavian decent? To me he looks like a South American. In all, this is a great looking plane, very high quality and at a fantastic low price. I am sure it will be a great flyer - will let you know.

Arquivos de clientes
No File Name Download [362]
No File Name Download [315]
No File Name Download [274]
No File Name Download [234]
No File Name Download [377]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!