New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Walkera QR X350 PRO FPV GPS RC Quadrotor (PNF)

Walkera QR X350 PRO FPV GPS RC Quadrotor (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
198000277-0
WANT FREE SHIPPING? Click here to find out more!

O Walkera QR X350 revolucionou o mercado de multi-rotor após a sua libertação em 2013, trazendo GPS estabilizados voo mutli-rotor ao mercado R / C a um preço acessível. Walkera está quebrando as regras novamente em 2014 com o lançamento de todos os novos QR X350 PRO, que possui toda uma série de novas funcionalidades e otimização para uso de vídeo / FPV aérea.

O novo Walkera QR X350 PRO oferece tempos de 25 minutos de vôo surpreendentes sobre o sistema de energia estoque, apresenta o novo controlador de vôo todos DEVO-M proporcionando um melhor posição de estabilidade / GPS que prende e que também é "Plug and Play" compatíveis com o G-2D brushless do Walkera cardan câmera.

O QR X350 PRO tem um sensor de altitude reforçada que adota a tecnologia GPS que lhe permite trabalhar fora da sua posição exacta em relação ao mundo, isso permite que o QR X350 PRO a pairar em um modo de posição de espera estabilizado. Com um simples virar um interruptor ou perda de sinal do QR X350 PRO voará-se de volta para a sua posição e da terra take-off! Além disso, oferece um modo manual para o passageiro esporte e até mesmo um sistema de alerta de baixa tensão a bordo para alertá-lo quando é hora de pousar.

Esta versão do QR X350 PRO está em "Plug and Fly" forma, o que significa que você simplesmente precisa adicionar o seu próprio sistema de rádio (transmissor e receptor) e bateria 3S Lipoly. O QR X350 PRO também é plug and play compatível com o cardan brushless G-2D (vendido separadamente).

Características:
• Plug and Fly - Simplesmente adicione seu próprio sistema de rádio ea bateria
• Capaz de 25 minutos os horários de voos com bateria Walkera 3S 5200mAh Lipoly (vendido separadamente)
• sistema de controle de vôo de precisão melhorada
• exploração posição GPS aprimorado
• sensor de Altitude
• sensor de Compass
• G-2D cardan câmera brushless pronto (vendido separadamente)
• One Key "Return to Home"
• Modo estável com GPS e altitude hold
• à prova de falhas para voltar para casa e desembarque
• proteção de baixa tensão
• Carregador de Equilíbrio com adaptador de parede compatível mundo
• Fácil de ver LEDs

especificações:
Diâmetro do rotor principal: 556 milímetros
Comprimento da lâmina do rotor principal: 206 milímetros
Comprimento: 289 milímetros
Largura: 289 milímetros
Altura: 200mm
Motor brushless: WK-WS-28-008A
Brushless ESC: WST-15A (L / R)
Controlador principal: DEVO-M
Bateria: 3S ​​11.1V 5200mAh Lipoly (vendido separadamente)
O tempo de vôo: 25 minutos
Apoio brushless cardan: G-2D (compatível com iLook e GoPro Hero 3) (vendido separadamente)

inclui:
Walkera QR X350 plug PRO e Fly Quadrotor
peças hélices
cabo trainer
cabo USB
Manual do usuário

Requeridos:
transmissor mínimo 6CH e receptor (8CH ou mais para o controle de inclinação / roll brushless cardan completo)
bateria 3S 11.V 5200mAh Lipoly

* Nota: O QR X350 PRO utiliza 3,5 milímetros conectores de bala para o plug da bateria. Um adaptador XT60 está disponível, por favor, ver artigos relacionados abaixo.

  • SKU 198000277-0
  • Brand -
  • Capacidade ( mAh) -
  • Peso 2150.0000
  • Comprimento 550.00
  • Packaging Width 120.00
  • Altura 360.00
  • Walkera QR X350 PRO FPV GPS RC Quadcopter
  • Walkera QR X350 Pro
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

this is my first quadrocopter hope it does not disappoint me

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this is my first quadrocopter hope it does not disappoint me

for the price , quality is very good. i using with Orange/Futaba 8 ch receiver (without case), internal space is very tight.

motors are ok, but could be better. i will change when i put the gimbal and camera.

here a short video of my QR x350 pro, flying on loiter and manual mode:
https://www.youtube.com/watch?v=hI6-lCu0faA

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

for the price , quality is very good. i using with Orange/Futaba 8 ch receiver (without case), internal space is very tight.

motors are ok, but could be better. i will change when i put the gimbal and camera.

here a short video of my QR x350 pro, flying on loiter and manual mode:
https://www.youtube.com/watch?v=hI6-lCu0faA

Shipping took just over one week to receive the x350 Pro in the USA. I installed a Futaba R617FS receiver and use a Futaba 7C transmitter for control. Only one of the 5 cables that are required to connect the R617FS receiver to the Devo-M flight controller were included. I had to make the other four cables. I setup manual, position hold, and return to home flight modes, operated by a three position switch on the transmitter. The flight modes all work great. I have not implemented the IOC function at this time. I've also installed key chain camera to record flight videos. I have limited experience with quadcopters, but I feel the X350 Pro is very stable and great fun to fly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Shipping took just over one week to receive the x350 Pro in the USA. I installed a Futaba R617FS receiver and use a Futaba 7C transmitter for control. Only one of the 5 cables that are required to connect the R617FS receiver to the Devo-M flight controller were included. I had to make the other four cables. I setup manual, position hold, and return to home flight modes, operated by a three position switch on the transmitter. The flight modes all work great. I have not implemented the IOC function at this time. I've also installed key chain camera to record flight videos. I have limited experience with quadcopters, but I feel the X350 Pro is very stable and great fun to fly.

Just an Update to let you know the Walkera QRx350 Pro can be programmed by Mission Planner just like the APM 2.6, You can Use all 6 flight modes on the QRX 350Pro as on the APM, and adjust the voltage for the QRX350 Pro to return to launch and Not just LAND, Thanks to the guys at RCgroup. c o m,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just an Update to let you know the Walkera QRx350 Pro can be programmed by Mission Planner just like the APM 2.6, You can Use all 6 flight modes on the QRX 350Pro as on the APM, and adjust the voltage for the QRX350 Pro to return to launch and Not just LAND, Thanks to the guys at RCgroup. c o m,

Iv had the QRX350 PRO about a week, Shipping to UK,3 weeks,Done the LV mod and getting 8mins from a 2200Mha 3 cell, Will be using test the 5200Mha over the next wekk,Im using a Frsky Taranis with the X8R Installed in quad, Used RCGroups to sort the config out, So far GPS is very quick to get signal, Holds well in the right mode, Not tested the RTL function YET as I have only flown within my boundaries ,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Iv had the QRX350 PRO about a week, Shipping to UK,3 weeks,Done the LV mod and getting 8mins from a 2200Mha 3 cell, Will be using test the 5200Mha over the next wekk,Im using a Frsky Taranis with the X8R Installed in quad, Used RCGroups to sort the config out, So far GPS is very quick to get signal, Holds well in the right mode, Not tested the RTL function YET as I have only flown within my boundaries ,

Customer files
adding telemetry end osd module Download [260]
X350PRO quick start guide Download [1940]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save