Walkera Runner 250 FPV Corrida Quadrotor w / Motors / ESC / controlador de vôo / Receiver (PNF / B & F)

• Overall
• Quality
• Value

Customer Rated

Aug 14, 2015

Destroyed 4 M2 hex keys trying to screw Runners plastic legs! All screws go inside up to the middle and the hex key start to slip.

• Overall
• Quality
• Value

Customer Rated

Aug 06, 2015

Nice Clean,well built frame with strong design and rigid frame, putting it together was fairly simple difficulty was with the Hex Screws 2 x 14 and 2 x 7 HEX head bolts, they are really tight to put in the SKID and the Frame they will bust the hex key and will do so right were you cant grab it with a pair of pliers be warned.
I had to replace mine with regular phillips head screws which made the build much easier.
Great looking bird, rugged and sleek, the kit was great and all supplied was a great fit, great job from walkera very minimal wiring which makes the build look super cool.
took roughly 3-4 hours with the HEX screw issues, but very easy and fun build.
The second warning is with the servo input output plug there is only 1 5v plug for the RX the others are single signal wires only "not the regular 3 ,black red and white plug" servo extensions they are single signal wires only , you can use a extension in series for just single wire bridges. meaning run the plugs horizontal not vertical.
this will make the build time easier , i also used 1 single wire to complete the GEAR "walkera" FLAPS "Futaba" channel