Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

Wasp V4 Belt Impulsionada CP / Brushless R / C helicóptero

Wasp V4 Belt Impulsionada CP / Brushless R / C helicóptero

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1350 g
SKU:
HWH03-5
Descrição
do

O v3 WASP (atualizado para v4)
Um pequeno helicóptero com algumas grandes características de tamanho de heli, como giroscópio e um rotor de cauda conduzido cinto, campo coletivo e um sistema brushless.
Este heli está quase pronto para voar, diretamente da caixa. Apenas adicione seu próprio receptor e você está pronto para ir!

Spec.
Diâmetro do rotor principal: 440 milímetros
comprimento do corpo principal: 475 milímetros
tempo médio de voo: 10-15min
Tipo do motor principal: tamanho Brushless Outrunner 370
Bateria: lipoly 11.1v 800mAh
Necessário: 6ch transmissor / receptor

Esta unidade foi atualizado para a vespa v4.
Vamos atualizar as fotos e informações sobre o produto o mais rapidamente possível.
A cor pode variar de foto.
Product
Specifications

Características do Produto

  • SKU:
    HWH03-5
  • Brand:
    N/D
  • Peso ( g )
    1350.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
It is right buy.I need one for real training. thx.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Recendy bought one, it came with the mail after 10 days :) After chekking that everything was there, I discouver that one schrew was missing in the swashplate (M1,6 x 10mm).Just went to a optissian and got one. OK.Trimmed up the servos, and movements. Gave the engine app. 80 % of energy suddenly the tail rotor stop rotating !. The tailrotor belt wheel got loose from the the tailshaft Get a extra tail shaft with a belt wheel.Havent been aborne yet
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I made about 100 flights now with this heli, quite a lot I think. So in my opinion it is a good heli with good flight performance.

I'm new with heli's, I learn to fly with it, so I only hoover and fly circles, the parts are not tested with high 3D loads.

These are the things I had to deal with:

Difficulties to get it flying with my own transmitter, the set up is not easy for an unexperienced.

After 15 flights I replaced the gyro + servo by a logictech2100+servo.

After 30 flights 1 swash servo failed. I finally replaced all three of them with the HD-202.

I also bought an extra lipo after 30 flights.

After 80 flights the one way bearing on the main transmission failed. I screwed the main gear on the belt pulley.

The skyartec Lipo (60 charges) + the esc + the motor are still doing well.

I think it is a good heli for learning to fly and absolutely worth money
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Only 3 Stars because one of the blades broke at first spinup, missed my leg and punched a hole in my door.



The tail was moving fast from left to right no matter how i set the gyro. it worked only after removing the Gyros plug from the gear channel, replacing the tail servo with a fast digital jr one and reducing the massive play in the tail pitch by adding ca coats to the linkages.



There is / was a lot of play not only in the tail but also in the linkages of the rotorhead.



After fixing those issues ists a really nice tiny heli for a unbeatable price.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
j'ai achet le complet plus pieces de rechange je test et je vous dit voir meme video dans le forum
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm a newby with helicopters, but after one week of setting up and trying, I'm hoovering a little with this helicopter.

It seems to fly well!



Setting up the heli on my FF-7 was difficult, especially the gyro setup.

It is difficult, because there is no manual included how to do this.



I found a manual on the internet for the gyro (and also for the esc) on



http://www.skyartec.com/UploadFiles/Instruction%20manual/PDF/Equipment/Sky500%20Gyro/Sky500%20Gyro.pdf
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I give it 4 stars. Almost 3

After 2 runs the oneway diff fails.

Temporarly fixed it by glueing the maingear and beltpulley together with CA.

Swash static and dynamic weren't lock together so I did not fly untill I glued those parts together with locktite.



Gyro doesn't intilize with a corona synth receiver so I made a switch between the Plus wire of the Gyro to turn it on after the receiver started.



But it looks great. Upgrade parts are nice.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Small helicopter equipped like large. Before putting it in the air, it is necessary to check if all is quite tight. I have to balance the principal blades and to adjust tracking.I have also to stick the top swashplate into the bearing of the sub-swashplate.

Following several tests, it appears that the gyro does not function with a synthesized receiver, I have to assemble a receiver to quartz.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very fast delivery to Japan. Packed neatly.



The main frame is made of carbon and many parts are metal. Very rigid structure.



I found difficulty in tail linkage. When tighten the tail boom stator, tail linkage does not work (Tail boom stator is also used for tail linkage rod guide. If tighten it, the guide hole become too small for the rod to move smooth. It is difficult to describe it here but you understand when see it actually). So I had to make the guide hole larger.



At first flight, there was a serious vibration. I had to balance the main blades at the field. Then it flied quite stable.



After several flights, the tail unit (Made of resin) got cracked. I think the unit was damaged during the first vibration. I should have balanced the main blades before the flight. I ordered upgrade tail unit (Metal) at another site (This site does not sell them). I found this small heli very attractive anyway.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
He comprado un segundo HELI



Pero AVISO necesita una emisora que se pueda programar para ccpm (como la F7 de FUTABA)

Uno de los helis era para mi hijo, que tine una FUTABA F6 - para esta NO VALE
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.