New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

XK4060-1500KV Brushless Inrunner

XK4060-1500KV Brushless Inrunner

Shipped From:
  • International (Hong Kong)
Discontinued Product

Please continue searching for a similar product.
SKU:
XK4060-1500KV
WANT FREE SHIPPING? Click here to find out more!

XK4060-1500KV Brushless Inrunner

Especificações.
Max Amps: 55A
Max Volt: 14.8V
Max Watts: 815W
Rpm / V: 1500kv
Resistência: 0,0214 ohms
No-load Corrente: 0.8A (7.4V)
Dimensão: 39,8 milímetros x 59,8 milímetros
Profundidade do furo de montagem: 7 milímetros
Comprimento de estender Shaft: 18 milímetros
Diâmetro do eixo: 5mm
Peso: 285 g

  • SKU XK4060-1500KV
  • Brand -
  • Peso 426.0000
  • Comprimento 161.00
  • Packaging Width 63.00
  • Altura 80.00
  • Kv ( rpm / v ) 1500.00
  • Correntes Max (A) 55.00
  • Resistência (MH ) 21.00
  • Max Tensão ( V) 15.00
  • Potência (W) 815.00
  • Shaft A ( mm) 5.00
  • Comprimento B (mm) 60.00
  • Diâmetro C ( mm ) 40.00
  • Pode Comprimento D (mm) 54.00
  • Comprimento Total E ( mm) 77.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

i got this motor yesterday in the mail ..""""" packaging is not flash """"" ignore that """,,, hooked it up to the 120 HK ESC i also got .... used the HK 150 car program card to adjust a few settings then out for a test in my Himoto buggy on 4s 5000... let me say this is the best set up i have ever had in this buggy" ITS FAST " .... although its 1500 kv it still gets a bit hot when bashed for 10 mins with motor timing on high .. so i put that back at the default setting ....... 5 crowns all round .. thanks HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i got this motor yesterday in the mail ..""""" packaging is not flash """"" ignore that """,,, hooked it up to the 120 HK ESC i also got .... used the HK 150 car program card to adjust a few settings then out for a test in my Himoto buggy on 4s 5000... let me say this is the best set up i have ever had in this buggy" ITS FAST " .... although its 1500 kv it still gets a bit hot when bashed for 10 mins with motor timing on high .. so i put that back at the default setting ....... 5 crowns all round .. thanks HK

Great motor for the new Changesun 90mm 12 blade fan! The case needs some sanding to fit the 39mm shroud which was done in minutes on my belt sander. On 6S this motor draws 83A/1900watts stabilized. I added HK cooling fins (made for 36mm motors but fit this as well) and the motor temps were very reasonable at about 150F max after extended running at WOT.
I did notice the large allen screws holding the end cap did not have any locktite so some was added to each screw. The small screws on the other end were secured properly and no locktite was needed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor for the new Changesun 90mm 12 blade fan! The case needs some sanding to fit the 39mm shroud which was done in minutes on my belt sander. On 6S this motor draws 83A/1900watts stabilized. I added HK cooling fins (made for 36mm motors but fit this as well) and the motor temps were very reasonable at about 150F max after extended running at WOT.
I did notice the large allen screws holding the end cap did not have any locktite so some was added to each screw. The small screws on the other end were secured properly and no locktite was needed.

Foto misure distanza fori fissaggio motore

google traslator

Photo measures distance engine mounting holes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Foto misure distanza fori fissaggio motore

google traslator

Photo measures distance engine mounting holes

ottimo motore caratteristiche da verificare

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ottimo motore caratteristiche da verificare

Running this motor in a 2,3m glider of 1,5kg on 2S with a 14x10 folding prop more than enough power for many quick climbouts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Running this motor in a 2,3m glider of 1,5kg on 2S with a 14x10 folding prop more than enough power for many quick climbouts.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!