Projetado para uso com nosso Multistar 15 esc amp, este cabo simplifica a construção de seu sistema de energia Tricopter, permitindo que você simplesmente ligar o sistema em conjunto - Plug and play estilo e com solda de zero!
Este cabo vem pré encerrado com uma entrada de bateria XT60 e termina em 3 pares de 3,5 milímetros conectores de ouro feminina. Fiação é silicone isolados 14 AWG - dividindo-se em 18 AWG.
Por favor, veja os itens relacionados abaixo para construir um plug toda e jogar sistema de energia!
Entrada da bateria através de: XT60 Feminino
Saída Esc via: 3,5 milímetros de Ouro Connector
Esc Quantidade: 3
Wire Gauge: 14/18 AWG
Comprimento: 220 milímetros
Peso: 21 gramas
Características do Produto
Peso ( g )
A multirotor or multicopter is a rotorcraft with more than two rotors. An advantage of multirotor aircraft is the simpler rotor mechanics required for flight control. Unlike single- and double-rotor helicopters which use complex variable pitch rotors whose pitch varies as the blade rotates for flight stability and control, multirotors often use fixed-pitch blades; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.
Due to their ease of both construction and control, multirotor aircraft are frequently used in radio control aircraft and UAV projects in which the names tricopter, quadcopter, hexacopter and octocopter are frequently used to refer to 3-, 4-, 6- and 8-rotor helicopters, respectively.
In order to allow more power and stability at reduced weight coaxial rotors can be employed, in which each arm has two motors, running in opposite directions (one facing up and one facing down).I am running two 10amp esc's and a 5amp bec off this with a 2s 1300mAh lipo. The connections are solid and well insulated.Great for most tri copters. For people who would rather pay a dollar for a soldering job than soldering yourself.GO FDISOVCIJXKCJ TJEKOQRHGIOUYHEThis is the best! I could only find PDBs or 4plus harnesses, so when i saw this It was a no brainer, is worging great, I just removed the XT-60 in order to put on a BEC.Everyone who builds tricopter, wants to have it nice and clean, and doesn't have time for soldering, must have one of these!It's a good product. I like it. It works as it should be.
Two thumbs up. I would like to recommend it to all user.Good power distribution cable if you dont have a PDB of some sort!Designed for use with our Multistar 15 amp esc, this cable simplifies the construction of your Tricopter power system by allowing you to simply plug the system together - Plug and play style and with zero soldering!
This cable comes pre terminated with an XT60 battery input and terminates in 3 pairs of 3.5mm female gold connectors. Wiring is silicone insulated 14 Awg - splitting into 18 Awg.
Please see the related items below to build an entire plug and play power system!
Battery Input via: XT60 Female
Esc output via: 3.5mm Gold Connector
Esc Quantity: 3
Wire Gauge: 14/18 AWG
Weight: 21 gramsThin wires I will test it in my Tricopter
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!