Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

motor de 26cc XY A-Spec V2 Gas

motor de 26cc XY A-Spec V2 Gas

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1998 g
SKU:
XY-26A
Descrição
do

O motor a gasolina XY 26cc A-Spec

O 26cc A-spec difere do C-Spec e com a maioria dos outros motores de avião de gás devido ao seu design cabeça altamente refinada e fundição. A cabeça do cilindro do A-Spec é lançado usando um processo extremamente precisos que resulta em uma cabeça mais leve com a mesma eficiência de refrigeração como maiores cabeças cylender mais grossos.

O motor V2 tem uma big-final melhorada, reduzindo qualquer chance de um eixo ou de equilíbrio problema dobrado.

motores XY vêm com um caso de manivela CNC moído e um carburador Walbro (japonês), bem como uma garantia de 2yr sobre as peças de ignição eletrônicos e 12 meses em todas as peças mecânicas.

Especificações.
Peso: 980g (sem silenciador)
Capacidade: 25.4cc
Diâmetro / Curso: 34 x 28 milímetros
Spark Plug: NGK-BPMR6F
Carburador: Walbro
RPM: 1.500 - 10.000
Potência: 1.5 kW @ 10,000rpm
Prop sugerida: 18 * 6 ~ 10/16 * 8 ~ 12
Rácio de óleo: 25-40: 1 (Octane de 93 ou superior)
CDI Tensão: 6.8V MAX (6v é melhor)

Este não é um motor de scooter modificado. Ele foi projetado apenas para aeronaves de grande escala R / C. Diferentemente da maioria dos outros motores de avião de gás construídas na região, este motor foi projetado, moído, torneado, forjado, fundido, testado e montado com o único objetivo de oferecer a melhor relação potência-peso, necessária para aviões de grande escala R / C.

Product
Specifications

Características do Produto

  • SKU:
    XY-26A
  • Brand:
    N/D
  • Capacidade ( mAh)
    Não
  • Peso ( g )
    1998.00
  • Comprimento:
    0.00
  • Largura:
    0.00
  • Altura
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Put mine in 72" cap232 really runs well but I notice a slight run out on crankshaft, is this the half moon key too high? tried to remove prop driver to investigate but my puller baulked at the job, seemed to be locktited on?

CAn anyone advise how best to remove it?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have owned this engine for just about a year now and it gets stringer each flight. Using synthetic oil ata 60:1 ratio with an APC 16x8 prop on my Seagull 90 sized Yak 54. Unlimited power. One minor drawback, choke plate spring wore out. had two deadstick landing before diagnosing the problem. Since I don't use a choke servo I just removed the choke plate and now choke engine with thumb over carb opening. Would buy another in a second. Good value
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well I have carefully read ALL the reviews for the four (4) 26CC Gas engines offered by HC.



It is an absolute Lottery to buy one of these units. There are many, many complaints of bent shafts, loose wires, cdi failing or not working at all upon arrival, Bad sensors and sensor brackets breaking.



I have been a prolific buyer and loyal customer of HC for years but I will have to buy my 26CC or 50CC gasers from another source. Too many problems
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I installed this engine on a KMP (ESM) Hawker Hurricane using a 15x8 three bladed Graupner

prop. It pulled my 19 pound Hawker through all the scale maneuvers that I would ever want to do. Such as loops, rolls, spit-s and a snap roll for good measure. This was done at a field that is over 4,000 feet above sea level. It's never given me a bit of trouble. I'm impressed with this engine and wouldn't hesitate to buy another.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sehr guter Motor!

Beim ersten mal nach drei mal drehen am Proppeller sprang der schon an.

Fliege den in meiner Spitfire wunderbar!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor com acabamento muito bom, demora umas duas horas voando para ficar bem afinado de quatro coroas porque com 6 voos soltaram 2 fios do conector da ignio e o motor falhou.Cortei os conectores e emendei. Audye
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had some problems getting this XYZ 26cc A-Spec to start but once I figured out the pulse hole to the carb was pluged it started right up with my electric start. I am getting 7200RPM with a Turnigt 17x8 prop and 7300RPM with a MAS 16x8 3 blade prop. I am running 89 octane fuel at 30 to 1 right now. This would have been a full 5 star engine if I had not had the starting problems. I will buy another XYZ 26 A-Spec if I ever need another 26cc.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very good running 26cc engine. I did have some trouble getting it started and once I figured out the pulse hole on the carb mainfold was covered it started very easy. I first choke the engine then turn on the ignition and flip the prop until I get a pop. I then open the choke and she starts within 1 or 2 flips. I am using a Turnigy 17x8 wood prop and I am getting 6700RPM with only 2 liters(1/2 gallon) of fuel at 30 to 1
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Aprs rodage , deux litres de mlange, il refuse de dmarer, c'est l'allumage qui a rendu l'ame.

La qualit de construction du moteur est moyenne,le silencieux, est trs bruyant, et l'allumage ne semble pas trs fiable. Hobby le prend en garanti,mais le prix du port en recommand,est sensiblement gal au prix de l'allumeur.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent engine but not the muffler.got my xy726 within a week of ordering it. great motor for the money.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.