New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Yak 54 3D 1,800 milímetros 30cc Gas (ARF)

Yak 54 3D 1,800 milímetros 30cc Gas (ARF)

Shipped From:
  • International (Hong Kong)
Discontinued Product

Please continue searching for a similar product.
SKU:
YAK-54_28
WANT FREE SHIPPING? Click here to find out more!

Apenas um rápido olhar para este Yak soberbamente trabalhada 54 é tudo o que tem de ficar impressionado com sua qualidade, olhar com mais atenção e você vai ver que este modelo é um ator sério.

A construção / ply Balsa é da melhor qualidade e muita atenção para redução de peso, sem comprometer a resistência, foi alcançado. Mais pistas sobre a qualidade deste modelo são dadas pela fibra de carbono sub-transporte e tubo de asa.

Construído com 3D em mente, o hardware é resistente, extensões chifre servo são fornecidos, leme é puxar / puxar, mas este modelo seria tão feliz voar esporte, para que você não precisa ser um piloto de hard-core 3D para apreciar e desfrutar este modelo acrobático escala verdadeiramente impressionante. Para 3D você precisa de um motor a gás 30cc, ou trem de energia elétrica equivalente, um motor a gasolina 26cc vai lhe dar um bom esporte flyer.

especificações:
Envergadura: 70,8 "(1.800 milímetros)
Duração: 69 "(1.755 milímetros)
Área Wing: 64dm / 2
Voar Peso: 3600G ~ 3800g
6 Channel (requer 2 x servo de aileron e elevador, servo do acelerador, leme servo)

inclui:
Foto Manual de Instruções
Tanque de combustível e acessórios
Montagens de motor
Todos Hardware

exige:
Seu próprio 6ch TX / RX
26cc ~ motor a gasolina 30cc
6 x Alto Torque, MG Servo

  • SKU YAK-54_28
  • Brand -
  • Capacidade ( mAh) -
  • Peso 6135.0000
  • Comprimento 1135.00
  • Packaging Width 240.00
  • Altura 500.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

G,day all this plane is by far the best I have purchased from hk . Maiden went fantastic 4 flies now just gets better I use all hk parts ect.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

G,day all this plane is by far the best I have purchased from hk . Maiden went fantastic 4 flies now just gets better I use all hk parts ect.

wont be starting this bild till spring must finnish all other projects first.nice looking plane and hardwear all looks good.will add review when done.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

wont be starting this bild till spring must finnish all other projects first.nice looking plane and hardwear all looks good.will add review when done.

I had the first test flight today only had to put a few clicks of up trim and a few clicks of right alieron. I put in the D/R what the book said and it was way to much so i halved it and put about 50pcnt expo to slow the servo speed down. Once i did that it, it went much better. i have got 5 Blue Bird Servos (BMS-660DMG HS Super Strong Digital Servo (MG) 14.2kg / .17sec / 52g) and a Turnigy RotorStar Dual Power 15A Voltage Regulator with 2x 3300mAh 2cell Lipos. I put a RCG 30cc Gas Engine in it and i had to cut the engine box back. I reinforced a lot of small areas and replaced the wing bolts with more stronger one's put another wing bolt at the back of the wing on both sides and i also replaced the wire that came with the plane for the Push-an-Pull system. But all up i am really happy how it flys, the take-off's are excellent and the landing's are great. 10/10 Thank You HOBBYKNG

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had the first test flight today only had to put a few clicks of up trim and a few clicks of right alieron. I put in the D/R what the book said and it was way to much so i halved it and put about 50pcnt expo to slow the servo speed down. Once i did that it, it went much better. i have got 5 Blue Bird Servos (BMS-660DMG HS Super Strong Digital Servo (MG) 14.2kg / .17sec / 52g) and a Turnigy RotorStar Dual Power 15A Voltage Regulator with 2x 3300mAh 2cell Lipos. I put a RCG 30cc Gas Engine in it and i had to cut the engine box back. I reinforced a lot of small areas and replaced the wing bolts with more stronger one's put another wing bolt at the back of the wing on both sides and i also replaced the wire that came with the plane for the Push-an-Pull system. But all up i am really happy how it flys, the take-off's are excellent and the landing's are great. 10/10 Thank You HOBBYKNG

Don't miss this one if your looking for a 30cc 3D capable aircraft!, excellent quality, well built and covered, I cannot fault it at all.

And to compare, I have owned and flown Extreme Flight models, and honestly this is worth a lot more than HK are charging.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't miss this one if your looking for a 30cc 3D capable aircraft!, excellent quality, well built and covered, I cannot fault it at all.

And to compare, I have owned and flown Extreme Flight models, and honestly this is worth a lot more than HK are charging.

the plane is great , i had a similar one from peak model and it flew just as good as this one I would recommend it to anyone wanting to take a crack at 3D flying its just the right size to fit in to a 4 door car and everything fits nice and right covering scheme looks awsome in the air

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the plane is great , i had a similar one from peak model and it flew just as good as this one I would recommend it to anyone wanting to take a crack at 3D flying its just the right size to fit in to a 4 door car and everything fits nice and right covering scheme looks awsome in the air

! .
RCG 30cc. 4500 . , 40 , . &#1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

! .
RCG 30cc. 4500 . , 40 , . &#1

Overall I'm delighted with this Yak. Superb value for money and all of the fixtures and fittings are usable. I did swap-out the fuel tank for a larger Dubro one but that was just personal choice. I also fitted Robart hinges in place of the "fuzzy CA" hinges supplied but I'm sure the latter would be more than adequate for the average sport flyer.

There's a full build review with images at http://www.rcmf.co.uk/4um/index.php/topic,93431.0.html

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall I'm delighted with this Yak. Superb value for money and all of the fixtures and fittings are usable. I did swap-out the fuel tank for a larger Dubro one but that was just personal choice. I also fitted Robart hinges in place of the "fuzzy CA" hinges supplied but I'm sure the latter would be more than adequate for the average sport flyer.

There's a full build review with images at http://www.rcmf.co.uk/4um/index.php/topic,93431.0.html

Nice construction throughout. Concerted to a electric version with a the recommended Power 160 outrunner motor. See uploaded pictiures.

Nino

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice construction throughout. Concerted to a electric version with a the recommended Power 160 outrunner motor. See uploaded pictiures.

Nino

got two of them put a 30cc on kt 19x10bambula rocket ship only thing it comes with ca hinges all other hardware is good built better than higher end models.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

got two of them put a 30cc on kt 19x10bambula rocket ship only thing it comes with ca hinges all other hardware is good built better than higher end models.

maiden flight today two clicks of down elevator only needed second flight after dialing in more expo one sweet 3d machine i had to shorten the engen box to fit the os 33cc gas motor YOU WONT BE DISAPOINTED EXELENT 3D AND LANDS LIKE A TRAINER GOOD ONE HOBBY KING

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

maiden flight today two clicks of down elevator only needed second flight after dialing in more expo one sweet 3d machine i had to shorten the engen box to fit the os 33cc gas motor YOU WONT BE DISAPOINTED EXELENT 3D AND LANDS LIKE A TRAINER GOOD ONE HOBBY KING

  1. 1
  2. 2
Customer files
yak Download [588]
Yak 54 POwer 160 Outrunner Download [562]
yak outrunner 160 Download [593]
HK manual YAK-54_28 Download [1393]
No File Name Download [1393]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!