Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

Z600-V3 Quadrotor Quadro Com Mid-Crab Landing Gear (600 milímetros) (branco / vermelho)

Z600-V3 Quadrotor Quadro Com Mid-Crab Landing Gear (600 milímetros) (branco /...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
568 g
SKU:
450000066-0

Combine

essential items and
acc
Descrição
do

O Z600-V3 é um quadro de 600 milímetros quad super-dimensionados e bem pensado construído a partir de materiais de qualidade. A estrutura principal é de fibra de vidro enquanto os braços V3 são construídos a partir de nylon de poliamida ultra-duráveis ​​e são mais grossos e mais fortes para reduzir a flexão.

A montagem é uma brisa com mangas pré-threaded latão para todos os parafusos de quadros, portanto, não lock-nozes são obrigatórios. A grande característica deste quadro é o grande guias de montagem na dianteira e traseira da placa principal da base da estrutura para câmeras de montagem ou outros acessórios. Isto faz para uma ótima maneira de levar vídeo aéreo ou voar FPV sem a necessidade de adicionar todos os suportes de montagem adicionais.

O Z600 também possui braços coloridos (2 brancos e 2 vermelho) que são grandes para orientação. Ela ajuda a mantê-lo voar na direção certa, sem a necessidade de diferentes adereços coloridos.

A Z600 inclui um trem de pouso estilo caranguejo Mid-perna com deslizamento na montagem para o quadro inferior. Nós oferecemos uma linha completa de produtos eletrônicos multi-rotor, como o controle multi-rotor bordo, ESC & motores. Nunca foi mais fácil ou mais acessível para obter um quad no ar!

Características:
• Construído a partir de fibra de vidro de qualidade e nylon poliamida.
• Pré-threaded mangas de latão para todos os parafusos de frame.
• braços coloridas para orientação para mantê-lo voando na direção certa.
• Mid-perna do trem de pouso estilo Crab
• Grandes guias de montagem na placa quadro inferior principal para a montagem fácil câmera.
• Fácil montagem.

especificações:
Largura: 600 milímetros
Altura: 58 milímetros w / o engrenagem caranguejo, 138 milímetros com a engrenagem do caranguejo
Peso: 390g (w / gear caranguejo incluídos mid-lift)
Buracos Motor Mount parafusos: 16 / 19mm

Product
Specifications

Características do Produto

  • SKU:
    450000066-0
  • Brand:
    Não
  • Peso ( g )
    568.00
  • Comprimento
    360.00
  • Largura:
    65.00
  • Altura:
    150.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Eu comprei esse frame, e coloquei 4 motores sunnysky , com esc afro de 30 amp aqui da HC, usando hlice 10x4. Ficou muito bom e econmico com 4s 5800mha. Tem espao ate pra uma bateria de 4s 10amp.O quadricptero com baterias 4s 5800, fica muito estvel e muito bonito no cu. ja com a 10amperes 4s, da uma tremida pra decolar mas voa direitinho. voa meia hora. eu vou comprar outro..muito bom..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this for a school project (my daughter's). It delivered on every promise. It is robust, easy to see and easy to build on- we customized some of the structure, and added a 3rd platform for components, but it was easy to construct- went together with no problems and has held up well to new pilot abuse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
At First, My quad (wight: 1750g) works perfectly with this frame for ~10 flights..After that It was crashed on coconut tree, the frame was not broken, but some arm had very light bend. after check and repaired the vehicle, I armed again..it is jerking/vibrating more and fly uncontrollable and soon get crash heavily...the vibration problem is not fixed yet..It was the problem of frame..more flexing after a single crash..so vibrating more when armed at 60pcnt throttle.. So I am not recommending this frame anymore..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice and strong frame, definetly would buy it again! It's a little flexible, so when you crash it doesn't brake. Still it's strong enough to fly stable. It's hard to fit a camera gimbal under the frame. Most are to large.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This framework is not good for anything , bend , vibrate too much, in short words is not quality for Hobyy king , if you have nice quality stuff please do not put them on sale
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have ordered these and he's very bad holes do not come out of the schroedraad. wire ends wont come loose and the holes are full of plastic I have the set immediately thrown in the garbage.
HK must keep better control
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Velmi odoln rm proti pokozen, ale jeliko je mkk, jsou zde do urit mry problmy s kmity a vybracemi.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Z600 is a nice, fairly robust frame. There are some issues with regard to alignment of the arms as I found that the motors when mounted were not straight. Also, be careful tightening the M3 bolts into the brass inset bushes used to connect the arms to the glass fibre plates. These can easily be stripped; so don't tighten them too hard and make sure you use loctite. HK do sell replacement crab-gear struts for this frame but for some reason, these are in various colours other then black (not that it's a problem). It would have been nice to have a third frame tier, or at least stand-offs provided for a power distribution board to clean up the "dirty" frame area. If you intend to use the crab gear, you will need to think about the area this consumes on the lower mounting plate front/rear extensions; especially if you want to mount a camera or anything else in these areas. I'm just waiting on stock now to buy another for spare parts. Hope this helps someone.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame if you're willing to put some work into it. First off I had to get M3 x 8 screws to mount the motors. A bit of a pain since these screw sizes are kind of an odd ball screw in the USA. Second when the motors where mounted I noticed they were not level so after 30 min with a bubble-leveler and some plastic shim stock I got that straightened out. After all that it flew great using the KK2.1.

So basically you get what you pay for. Its a cheap frame you can throw motors onto and it will work, just not very well. If you put in a little time leveling everything you'll be much happier with it. My only complaint is that it doesn't have a PCB base.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice frame... But need M3 x 10 for motor screw
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Z700v-2

Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Customer files
No File Name download now [3313kb]
No File Name download now [3569kb]
No File Name download now [1275kb]

Combine

essential items and
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.