New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Z700-V2 Quadrotor quadro branco / vermelho com o caranguejo Landing Gear (700 milímetros) V2

Z700-V2 Quadrotor quadro branco / vermelho com o caranguejo Landing Gear (700 milímetros) V2

Discontinued Product

Please continue searching for a similar product.
SKU:
450000065-0
WANT FREE SHIPPING? Click here to find out more!

O Z700-V2 é um quadro de 700 milímetros quad super-dimensionados e bem pensado construído a partir de materiais de qualidade. A estrutura principal é a fibra de vidro, enquanto os braços são construídos a partir de nylon de poliamida ultra-resistente.

A montagem é uma brisa com mangas pré-threaded latão para todos os parafusos de quadros, portanto, não lock-nozes são obrigatórios. A grande característica deste quadro é o grande guias de montagem na dianteira e traseira da placa principal da base da estrutura para câmeras de montagem ou outros acessórios. Isto faz para uma ótima maneira de levar vídeo aéreo ou voar FPV sem a necessidade de adicionar todos os suportes de montagem adicionais.

O Z700 também possui braços coloridos (2 brancos e 2 vermelho) que são grandes para orientação. Ela ajuda a mantê-lo voar na direção certa, sem a necessidade de diferentes adereços coloridos.

A Z700 inclui uma engrenagem estilo caranguejo pouso oi-leg definido e um suporte de gancho e haste de montagem. Nós oferecemos uma linha completa de produtos eletrônicos multi-rotor, como o controle multi-rotor bordo, ESC & motores. Nunca foi mais fácil ou mais acessível para obter um quad no ar!

Características:
• Construído a partir de fibra de vidro de qualidade e nylon poliamida.
• Pré-threaded mangas de latão para todos os parafusos de frame.
• braços coloridas para orientação para mantê-lo voando na direção certa.
• trem de pouso estilo caranguejo Hi-perna
• opções de montagem gancho e haste
• Grandes guias de montagem na placa quadro inferior principal para a montagem fácil câmera.
• Fácil montagem.

especificações:
Largura: 700 milímetros
Altura: 58 milímetros w / o caranguejo 258 milímetros artes de pesca do caranguejo
Peso: 570g (w / incluídos engrenagem do caranguejo oi-lift)
Buracos Motor Mount parafusos: 16 / 19mm
H
ook Rod Rail: Centro de 55-60mm a haste central 12 milímetros (11,75 milímetros)

  • SKU 450000065-0
  • Brand -
  • Capacidade ( mAh) -
  • Peso 825.0000
  • Comprimento 320.00
  • Largura 65.00
  • Altura 215.00
  • Z700v-2
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

First off, as quadcopter frames go and as the title suggests, this frame is enormous. For that reason, I have given this frame a slightly better score than I should have since it does come with a few errors. The brass sleeves for the screws are slightly covered by plastic and you have to spend a bit of time removing it. The motor mounting holes are irregular and you may need a few extra screws and some adapters to attach your motors. This aside however, I was surprised that my 2kg quad didn't buckle at the arm joints and fall to the ground in spectacular fashion. In fact, it flew almost perfectly first flight with an ardupilot controller. This frame is perfect if you're aiming to build for cinematography, photography (since the included crab legs are a plus) and if you just want to fly a huge quad. Good luck!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First off, as quadcopter frames go and as the title suggests, this frame is enormous. For that reason, I have given this frame a slightly better score than I should have since it does come with a few errors. The brass sleeves for the screws are slightly covered by plastic and you have to spend a bit of time removing it. The motor mounting holes are irregular and you may need a few extra screws and some adapters to attach your motors. This aside however, I was surprised that my 2kg quad didn't buckle at the arm joints and fall to the ground in spectacular fashion. In fact, it flew almost perfectly first flight with an ardupilot controller. This frame is perfect if you're aiming to build for cinematography, photography (since the included crab legs are a plus) and if you just want to fly a huge quad. Good luck!

Just as others have stated the arms are to flexible. I was having problems with stability and the quad wanting to twist to the right no matter what I did. I ordered the Upswept Upgrade Arms for DJI Flamewheel Style Multirotors V500 / H550 (Blue) (2pcs), installed them and all my problems disapeared so if you want wide center frame plates you can buy this but count on doing something to apgrade the weak flexible arms

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just as others have stated the arms are to flexible. I was having problems with stability and the quad wanting to twist to the right no matter what I did. I ordered the Upswept Upgrade Arms for DJI Flamewheel Style Multirotors V500 / H550 (Blue) (2pcs), installed them and all my problems disapeared so if you want wide center frame plates you can buy this but count on doing something to apgrade the weak flexible arms

gran i facil de veure a l'aire. espai de sobres per ficar una apm 2.6 amb tota la trasteria. osd, gps etc. fora estable i facil de monta. els braos flexan bastant pero en vol va fora be.
motors 2830 amb pala 9x4, variadors de 40amp i bateries 3s 5200mha. un dron mes que funciona

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

gran i facil de veure a l'aire. espai de sobres per ficar una apm 2.6 amb tota la trasteria. osd, gps etc. fora estable i facil de monta. els braos flexan bastant pero en vol va fora be.
motors 2830 amb pala 9x4, variadors de 40amp i bateries 3s 5200mha. un dron mes que funciona

There's been a lot of complaints about the flexible arms, and I have a solution. Lightly sand the outer sides so epoxy will adhere, then epoxy carbon fiber strips on both sides of the arms. This will stiffen the arms enough to allow for stable flight. Steve

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There's been a lot of complaints about the flexible arms, and I have a solution. Lightly sand the outer sides so epoxy will adhere, then epoxy carbon fiber strips on both sides of the arms. This will stiffen the arms enough to allow for stable flight. Steve

The arms flex way too much. Lots of vibration. The center section is fine, lots of room, good construction. Stiffen up the arms and it will be fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The arms flex way too much. Lots of vibration. The center section is fine, lots of room, good construction. Stiffen up the arms and it will be fine.

Does not fly well at all. Excessive arm flex creates huge instability problems. Unsuitable for fun flying to say nothing of using it for a video platform. FORGET this platform and look for something else.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Does not fly well at all. Excessive arm flex creates huge instability problems. Unsuitable for fun flying to say nothing of using it for a video platform. FORGET this platform and look for something else.

OK I wanted to go bigger than my F450 Quad so I decided to give this a try even though a few people have said there was too much arm flex. Anyway after putting it all together the first flight was smooth but Quad rotated right and needed left rudder to correct. I went through the quad again after posting for help in a few places and 1 arm may have been twisted enough to cause the problem because after slightly bending it after heating it and letting it cool down may have fixed it ( also went through my KK2.1.5 again and verified everything again it fly perfectly. Yes the arms have flex but I can deal with it. The landing gear could be better & I may swap it out or add to it to strengthen them maybe even add a battery holder to each side some how. I am using some cheap 800kv motors with 12.4.5 props to start with as I'm a novice then go to carbon fiber ones eventually. I am also running a EMAX 25amp 4in1 ESC in the quad as well as my F450 without issue. I have set this up for FPV and have Built my own Ground station and will post some videos of it soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK I wanted to go bigger than my F450 Quad so I decided to give this a try even though a few people have said there was too much arm flex. Anyway after putting it all together the first flight was smooth but Quad rotated right and needed left rudder to correct. I went through the quad again after posting for help in a few places and 1 arm may have been twisted enough to cause the problem because after slightly bending it after heating it and letting it cool down may have fixed it ( also went through my KK2.1.5 again and verified everything again it fly perfectly. Yes the arms have flex but I can deal with it. The landing gear could be better & I may swap it out or add to it to strengthen them maybe even add a battery holder to each side some how. I am using some cheap 800kv motors with 12.4.5 props to start with as I'm a novice then go to carbon fiber ones eventually. I am also running a EMAX 25amp 4in1 ESC in the quad as well as my F450 without issue. I have set this up for FPV and have Built my own Ground station and will post some videos of it soon.

This frame is not rigid and it vibrate with low KV motor and big propeller. In my case I have try it with 12 prop. Too much vibrations! The arms distords.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This frame is not rigid and it vibrate with low KV motor and big propeller. In my case I have try it with 12 prop. Too much vibrations! The arms distords.

For me, It wont fly properly, the arm flex to much creating an unstable craft, it look like the KK2 is always figthing no mater what setting, same goes for the Naze32. I have swap everything to confirm my stating, motor, ESC and board. I have tried everything else. the only way to resolve that where to install smaller and stronger (450) arm. My 3 stars goes to the frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For me, It wont fly properly, the arm flex to much creating an unstable craft, it look like the KK2 is always figthing no mater what setting, same goes for the Naze32. I have swap everything to confirm my stating, motor, ESC and board. I have tried everything else. the only way to resolve that where to install smaller and stronger (450) arm. My 3 stars goes to the frame.

The arms are very weak and flexible. It can not even hold motors. When used with landing skid, arms become curved because of the motor weight. In addition, during flight, it sometimes shakes because of flexible arms. May be good with 22/28 size 0945 size props, where the shaking force is low.
Instead of this frame, you may choose another Hobbyking product; whose arms seem more rigid: http://www.hobbyking.com/hobbyking/store/__56209__Q680_V3_Glass_Fiber_Quadcopter_Frame_680mm_Integrated_PCB_Version.html

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The arms are very weak and flexible. It can not even hold motors. When used with landing skid, arms become curved because of the motor weight. In addition, during flight, it sometimes shakes because of flexible arms. May be good with 22/28 size 0945 size props, where the shaking force is low.
Instead of this frame, you may choose another Hobbyking product; whose arms seem more rigid: http://www.hobbyking.com/hobbyking/store/__56209__Q680_V3_Glass_Fiber_Quadcopter_Frame_680mm_Integrated_PCB_Version.html

  1. 1
  2. 2
Customer files
DoesnotfitDeadCat.JPG Download [2025]
11.87mm Rods instead of 10mm Download [204]
Tarot 2d Gimbal Crab Clips don't fit Download [221]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save