A série ZTW Aranha dos CES são uma ótima opção para qualquer tamanho de multi-rotor.
Projetado desde o início para instalação simples e fácil configuração e pré-brilharam com SimonK OneShot 125 firmware para dar um super-suave, a resposta do acelerador rápido, linear, que é ideal para multi-rotores.
Juntamente com a excelente qualidade de construção, ZTW Aranha CES apresentam proteção contra sobrecarga térmica e auto acelerador desligado em caso de perda de sinal.
• Desenvolvido especificamente para uso multi-rotor
• Pré-brilhou de fábrica com firmware SimonK
• Utiliza poderosa, alta performance MCU
• resposta do acelerador Super-suave e preciso
• acelerador Auto fechado em sinal situação perde
• térmica de proteção de segurança da sobrecarga
• início de segurança, motor não será executado até ESC está armado corretamente
• resistência interna baixa
• Programável via stick do acelerador (ver instruções em "Files" guia)
Constante atual: 18A
Max Explosão atual: 30A
Tensão de entrada: 2 ~ 4S LiPoly
Dimensões: 43 x 22 x 12 milímetros
Peso: 5,3 g
Atenção: Não há bateria ou motoras conectores são fornecidos.
Características do Produto
Peso ( g )
Excellent ESC's. They have been rock solid performers and never even get warm running the Multistar Mini Monsters on 4S.Bought a bunch of these during the last sale. They're terrific ESC's and appear to be more reliable than the DYS SN20A's. The only thing I don't like about them is the difficulty in soldering to the motor wire pads. They use a horrible lead free solder and it's a pain to remove the stock wires. They should sell these with a wire-free version. The pads are really close to the chips so it would be easy to accidentally damage a component.Got these in the mail, excitedly soldered them in. Made sure polarity was right, plugged into my SPRacing F3, plugged in the battery and... instant smoke from one ESC, which took out a motor with it. Now the remaining 3 ESCs get incredibly hot just from having a battery plugged in. I've quadruple checked polarity, and it's all right. As soon as I plug them into my FC they start heating up rapidly.
Not great.Well this is awesome, it is smallest than a 12A ESC, lighter and I hope that can handle the job. Its measures: 22x12x5 mm and weighs 5 grams. Motor wires and battery wires has about 55 mm of length and Rx wire has 165 mm of length including connector. Heat shrink tube is transparent which is very nice and I am very excited to install them .Recommended, tiny size honestly about half the physical size of an Afro 12A.Good ESC, mine arrived with blheli firmware, i don't know what bootloader but pay attention that the problem with naze32 and cleanflight are true In my case the motor scroll a little when throttle is at 0.
Changing board to CC3d all works perfectly.I bought 4 of them for my 250 size quad.Bought these for use on a FPV250 quad and they work great with the Naze32. I bought 5 of these and 1 turned out to have a slow response compared to the others, luckily I had the 1 spare. Could just be it wasn't flashed with the same firmware.O good escs, but in my case I needed to reflash because Bheli version not compatible with betaflight firmware.
HK forgot to reflash with last Bheli firmware.Bought 4 to try out on my QAV210, work very well and power seems to be better than the DYS20A. I bought another 16 to replace those DYS20A which i keep having problem even new from pack. I will no buy DYS anymore as the ZTW works better and cost less.