Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

2.4Ghz SuperMicro Systems - приемник и ESC все-в-одном (5ch)

2.4Ghz SuperMicro Systems - приемник и ESC все-в-одном (5ch)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
8 g
Артикул:
HK104RX-S

Combine

essential items and
acc
Описание
товара

2.4ghz SuperMicro Все-в-одном устройстве объединяет приемник и 2A щетки ESC в одном компактном размера PCB микро.

Спекуляции.
Каналы: 4 (поддержка до 5 каналов с "Mul-CH")
Частота: 2.4Ghz
Тип: FHSS
ESC: 2A интегрированный Brushed
Размер: 21.40mm х 12.00mm х 6.00mm
Вес: 0,8 г не включая провода
Напряжение: 3.0V ~ 5.0V 1S LiPoly recommendedï¼ ‰

Антенна Длина: 30 мм

Особенности:
Режим Программируемая выходного терминала
Программируемая ESC
Разъем 1.0mm Pitch JST
Совместимость с SuperMicro двойного линейного сервопривода (HK2400)
Совместимость с Brushless ESC SuperMicro (HK030)

В комплекте.
1 х HK104RX-S Все в один блок

Требуется.
2.4Ghz модуль SuperMicro System

Product
Specifications

Дополнительная информация

  • Артикул:
    HK104RX-S
  • Brand:
    Нет
  • Вес ( г )
    8.00
  • длина
    95.00
  • ширина:
    7.00
  • Высота:
    60.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The RX is pretty much plug & play, Dirt cheap too.
The only problem I've found with it, is that the motor runs 100pcnt regardless of throttle position. No combination of changes to throttle input seems to make a difference. -1 star for that.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have 3 os this RX for my small planes and for my Alula : perfect
Only i had a problem when I have setup the "elevon" mix on my TX ( Turnigy 9X).
Without mix mode, ailerons and rudder must to connect in ALE and RUD connector on RX; but, if you setup "Elevon" mix in TX; I must to connect ailerons in ALE and TRHOOTLE connector
I am happy with this RX
Good range
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is not a reliable receiver. I bought two of them. One has burnt as quickly as it was connected to a 1s battery. both have lost their antenna very easily (fimsy soldering). I have soldered a little piece of wire in the one that was still working and it is alive again. I am using a micro module in a Futaba Tx 8U and micro linear servos and a eps6 motor. The system is irregular, not precise. It does not control the motor and the linear servos very in a trustable way. Since I live in Brazil I use to buy 2 or three boxes of products before I receive the previous one (it takes a long time for them to arrive). I have anoter of those rx, with two servos on it in the way home. I hope that works. I am in doubt to continue buying this kind of stuff for extra micro planes that is cheaper than Plantraco or Skyhooks. I am a little tired of testing all extra micro stuff ofered by Hobbyking. Servos that do not match receivers. lack of information about types of connectors, if they fit Jr or Futaba, need of change wires all the time, etc. In resume: good and bad products are mixed requiring a lot of trials. Thanks,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use it with my Grauner Hott TX and the 2.4Ghz SuperMicro Systems - JR Module.

No Problems so far!

0.8g, incredible! I love it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hello all



my name is Seb of France



I cherhcer leaflet of the systems SuperMicro receiver



I can not synchronize the receiver has a radio control



I have a Turnigy TGY 9X radio and RF MFX-600-X



is a manipulation has to synchronize but I know it



if someone can help will be very cool. "Or notice" of the RF-600 MFX-X "



and also I have the cables I buy Micro Power Connector Lead Pitch 1.25 - Female Plug (5pcs/bag)



and it is not good or I can find this cable is thank you.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bonjour a tous



je m'appelle Seb de la france



je cherhcer la notice du superMicro systems receiver



j'arrive pas a synchroniser le receiver a la radio commande



j'ai une radio turnigy TGY 9X et le RF-MFX 600-X



y a une manipulation a faire pour synchroniser mais je la connais pas



si une personne peut aider sera trs cool . " ou une notice" du RF-MFX 600-X "



et aussi j'ai les cables que j'ai acheter Micro Servo Connector Lead 1.25 Pitch - Female Plug (5pcs/bag)



et c'est pas les bons ou je peut trouver c'est cables merci .

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
it is very tiny receiver and works great but what is the matching servo lead for it? I ordered 'Micro Servo Connector Lead' but it is too big for it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
the integrat esc is on channel 1.
How to switch the channel 1 and 3 on turnigy 9X ?
Or is possible to switch the channel on RX ?

Thanks :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This receiver compatible with my Multiplex rolyal evo 2,4 ghz fhss system???????????????????????????????????????????????
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Saludos, compre este receptor y no viene con ninguna instruccion y el modulo HK-MFX600-F/H, pero no trae ninguna instruccion, para que funcione el ESC hay que colocar el dip switch No. 1 en ON y encender el RX, luego mantener el bind presionado y encender el trasmisor, y ya esta listo para funcionar.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual download now [1334kb]

Combine

essential items and
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.