New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Multistar V-Spec 1304-3100KV Multi-Ротор двигателя (CW)

Multistar V-Spec 1304-3100KV Multi-Ротор двигателя (CW)

Shipped From:
  • USA
  • Global
QTY:

Now save сэкономь 396,92 руб. 396,92 руб.

Special Price 461,63 руб. 461,63 руб.

You save сэкономь 396,92 руб. 396,92 руб.

Was  858,55 руб.

Статус:
Есть в наличии
Вес:
25 g
SKU:
9536000029-0
WANT FREE SHIPPING? Click here to find out more!

Multistar V-Spec OutRunners предназначены для достижения максимальной производительности! Устанавливая новые стандарты производительности мульти-ротора, каждый двигатель Multistar V-Spec имеет целью разработан для конкретного применения, позволяющей для повышения эффективности и мощности должны быть оптимизированы для использования по назначению.

Далеко не просто красивое лицо, Multistar V-Spec двигатели построены с использованием высококачественных компонентов и методов производства; Япония подшипники, N45SH магниты, .2mm слоистые, 180deg бескислородной медной проволоки, балансируя 0,005 толерантность, прецизионные обмотками и строгий осмотр постпродакшн, чтобы гарантировать, что только двигатели полностью соответствующие спецификации были доступны для продажи.

1304-3100kv Multistar V-Spec это настоящий маленький драгоценный камень двигателя, предназначенного для мини-диапазоне мультикоманд роторов и оптимизированной для 5-дюймовых реквизита, идеально подходит для тех жестких рамок, где 5-дюймовый реквизита максимум.

Multistar V-Spec поднимает планку с ее выдающимся качеством и производительностью.

Особенности:
• Япония Подшипники
• N45SH магниты
• 0,2 мм ламинаций
• 180deg бескислородной медный провод
• Или лучше 0,005 г балансировка
• прецизионные Обмотки

Технические характеристики:
KV (RPM / V): 3100KV
Напряжение: 7.4V (2S LiPoly)
Максимальная мощность: 59W
Max Amps: 8A
Нет ток нагрузки: 0.3A / 10V
Внутреннее сопротивление: 0,46 Ом
Количество полюсов: 9N / 12P
Вал двигателя: 2 мм
Опора Размер: 5 х 3 рекомендуется
Толщина Ламинирование: 0.2mm
Магниты: N45SH
Балансировка спецификации: 0,005 г
Проволока: 180deg O2 бесплатно
Болт расстояние между отверстиями: 10 х 12 M2
Размеры: 13 × 4 мм
Вес: 10 г

  • Артикул 9536000029-0
  • Brand MultiStar
  • Вес ( г ) 25.00
  • длина 65.00
  • Width 30.00
  • Высота 50.00
  • Kv ( об / об) 3100.00
  • Max Токи (A) 8.00
  • Сопротивление ( тк ) 0.64
  • Максимальное напряжение (В ) 7.00
  • Мощность (Вт ) 20.00
  • Вал А ( мм) 2.00
  • Длина В ( мм ) 12.00
  • Диаметр С ( мм ) 18.00
  • Может Длина D (мм ) 5.00
  • Общая длина E (мм ) 23.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This little thing is Awesome! I used it to power a HobbyKing Ridge Ryder using a Turning plush 10A esc, and 0.8mah 2s.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This little thing is Awesome! I used it to power a HobbyKing Ridge Ryder using a Turning plush 10A esc, and 0.8mah 2s.

these motors are great the only reason i am giving them a 3 star is because of miss shipment and 2 broken motors out of 12

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these motors are great the only reason i am giving them a 3 star is because of miss shipment and 2 broken motors out of 12

I bought these for the size. Got them in and found there are no adapters for the 2mm shaft to the 5mm hubs for propeller. If you get these, plan on making your own adapters.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought these for the size. Got them in and found there are no adapters for the 2mm shaft to the 5mm hubs for propeller. If you get these, plan on making your own adapters.

I'm a little bit surprised that these motors are still so unknown and without any review here.
I'm following like so many the new trend of 1306 motors with only 3-3,5 inch props and full FPV stuff for AUW around 200g. I was looking for some lighter alternatives than 1306 but bigger/more powerful than 1104/1105 (which are great but not enough for 200g AUW).
And these 1304 fit perfectly in the gap between 110x and 1306 motors. Weight without nut (where I always use lighter and better stop nuts) is only 7,7g which ist around 4g less than usual 1306, so saves about 16g overall which is a lot for micro quads.
Thrust with 3-4 inch is similar as with 1306 but keep in mind that these 4g less means 1/3 less metal to cool down high currents! So 4S 4" may be to much or 5" 3S.
I personally would not use this motor for 5". They are great with the pricy Rotorx RX3040T or with Gemfam 3545BN GF/Nylon reinforced.
More kV would be nice as many people will use this motor only for 3-4 inch.
Sound/smoothness is fine so far, let's add some more test flights to give 5 Stars quality.
Motor cables are like most 1306 so-so and easy to break at the ESC soldering. So still room for improvement. The only small motors I know which do much better here with soft cables and multiple fine wires are RCX (even until 1105 size) and DYS 1306.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm a little bit surprised that these motors are still so unknown and without any review here.
I'm following like so many the new trend of 1306 motors with only 3-3,5 inch props and full FPV stuff for AUW around 200g. I was looking for some lighter alternatives than 1306 but bigger/more powerful than 1104/1105 (which are great but not enough for 200g AUW).
And these 1304 fit perfectly in the gap between 110x and 1306 motors. Weight without nut (where I always use lighter and better stop nuts) is only 7,7g which ist around 4g less than usual 1306, so saves about 16g overall which is a lot for micro quads.
Thrust with 3-4 inch is similar as with 1306 but keep in mind that these 4g less means 1/3 less metal to cool down high currents! So 4S 4" may be to much or 5" 3S.
I personally would not use this motor for 5". They are great with the pricy Rotorx RX3040T or with Gemfam 3545BN GF/Nylon reinforced.
More kV would be nice as many people will use this motor only for 3-4 inch.
Sound/smoothness is fine so far, let's add some more test flights to give 5 Stars quality.
Motor cables are like most 1306 so-so and easy to break at the ESC soldering. So still room for improvement. The only small motors I know which do much better here with soft cables and multiple fine wires are RCX (even until 1105 size) and DYS 1306.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags