Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

3W Blue LED сплава полосы 120 мм х 12 мм (3s-совместимый)

3W Blue LED сплава полосы 120 мм х 12 мм (3s-совместимый)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
10 g
Артикул:
371000073
Описание
товара

3W Blue LED сплава полосы 120 мм х 12 мм (3s-совместимый)

Технические характеристики:
Размеры: 120 х 12 мм
Вес: 7g
Разъем: JST
Угол пучка: 120 градусов     
Мощность: 3w
Цветовая температура: 460-465nm
Напряжение: 11.1V-13.5V (3s LiPoly)
Ток: 280mA
Световой поток: 240-270LM
Индекс цветопередачи: 70-85
Материал: алюминиевая пластина
Срок службы: 50000 часов
Рабочая температура: -20 - +60 градусов по Цельсию

* Примечание: убедитесь , что ток ниже , чем 280mA или вы рискуете повредить светодиодные ленты
Product
Specifications

Дополнительная информация

  • Артикул:
    371000073
  • Brand:
    Нет
  • Вес ( г )
    10.00
  • длина
    130.00
  • ширина:
    5.00
  • Высота:
    20.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
produit une forte lumi?re bleu visible de loin, excellent pour les course fpv bonne visibilit? des autre quad a travers la camera
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using a programmable light controller with these. PWM creates cool pulsing and fading effects. Can't say what it is cause it's not available from HK. Just a thought on their versatility.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These came and they only run off of the full 3S Li-Po voltage. They looked great at first but now one of the individual LEDs on one strip and two on the other strip have gone out. I hope this is all that are going to go out, or this will be a waste of money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello, I received my LED bar bleu.le JST connector connected backwards but weld properly. the right connection is nothing on. I tested all in all directions nothing to report. I contacted chat he told me to post two photos, but the last two days that I try it tells me that the HK server will not boot ... how to get a refund?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
you can see thse from a mile away. Careful with polarity. some are wired backwards in the JST connector
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
wires where around the wrong way and strangely 1 came with some small electronics thing on it with capaciter and chip
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good Quality, extremely bright! If you have proper cooling, this is a very good product for your multicopter or helicopter. There must be direct propwash to the led, otherwise they heat up and melt... running them on 11.1V (3S lipo), works just fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These get soo hot after only 10 seconds on a 3S lipo... they will literally melt your skin. Had planned to put them under the arms of my F450.... but think I'll pass. Waste of time and money.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.