Итоговая цена

0,00 руб.

Корзина 0 Корзина 0 Loading...

50cc ~ 60cc Питтс Глушитель (Совместимость с дымовыми Systems)

Generating Links

50cc ~ 60cc Питтс Глушитель (Совместимость с дымовыми Systems)

Уже купили Discontinued Product

Please continue searching for a similar product.
Артикул:
317000023
Хотите бесплатную доставку? кликните сюда Узнать больше!

Славное качество полированные сплава Питтс Глушитель (озадачен), который идеально подходит для систем дыма (M5 накидная гайка может быть подключен с помощью болта, если не используется система дыма).

Технические характеристики:
Вес: 176g
Совместимость: DLA 55, DM 55, ГРС 50, Turnigy HP 50 и т.д. (Болт Разнос 40 мм)

Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

Elcorro | Проверенный покупатель

  • Value
  • Quality
  • Overall

Smoke hole

Nov 04, 2016

I personally don't have this muffler, so I can't comment on the quality, but what I can mention about it is that the hole for the smoke nipple isn't for smoke, what it's for is a mounting bracket to support the muffler itself to prevent breaking.

WetPants | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Jan 01, 2014

I have had two of these. Both broke after about 30 flights. Had the same experience with JTEC pitts muffler too. I give up. Will have to go with a canister. DLE55 on Extra260. Shame as they are cheap and look nicely made.

WetPants | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Sep 24, 2013

Fitted OK to DLE55. Sounds nice. But it fractured and failed after about 20 flights.
I wont judge it yet though. I found the HT lead had been touching the muffler and this can cause failure. So in fact possibly a better record than two Jtec mufflers that have failed similarly but for no apparent reason whatsoever. I know they can fail if they touch anything at all, like the cowl.

Netmav | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Aug 31, 2013

Very nice and cheap Pitts muffler. I installed it on the RCG50 in my 50cc HK SBach without issues. I didn't bother to use the stock smoke oil nipple hole, though.. It's located to far from exhaust port. I plan on making another nipple hole closer to the exhaust port during the winter. I only gave it 4 "quality-stars" because of the useless nipple hole.

| Проверенный покупатель

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 20, 2013

great build,is baffled and the finish is excellent, mating surface is a little rough but with gasket there is no leak so don't let the other reviews scare you.you should always have a gasket of some fashion for the exhaust

richard | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Mar 14, 2013

Sandyjan-
A lot of folks use baby oil. The main ingredient in baby oil is mineral oil. Look at the pharmacy for mineral oil. It is much cheaper per oz. that baby oil without the heavy perfume smell. I cut the mineral oil with kerosene to thin it a bit. Some use diesel but kerosene again has less odor than diesel. 70 percent mineral oil to 30 percent kerosene seems to work best for me.

richard | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Jan 28, 2013

Hooked up the Sullivan Skywriter today70 mineral oil and pcnt30 kerosene. Had great success with this mixture in a previous homemade muffler.
Well forget this thing being advertised as a smoke muffler! Puked all the oil straight on the ground. Tried to speed up the pump, slow it down.......it doesn't work! Nice finish and provides an ok sound. Does fit the DM-55

opjose | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Aug 22, 2012

It's pretty nice. However the contact surface (where the muffler contacts the cylinder head ) is pretty rough. You could grind it smooth yourself or use a gasket. This should really be done in manufacturing.



It looks great and fits the DM engines perfectly.



I'm not sure about the placement of the so-called "smoke" opening. IMHO it is too far from the cylinder head.





The muffler looks like it was cast then grinded smooth and polished.



If the roughness of the contact surface was fixed it would be a five stars.

Файлы клиентов
Broken muffler Download [106]
Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!