Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

600мм Flybarless Высокое качество углеродного волокна Основные лезвия

600мм Flybarless Высокое качество углеродного волокна Основные лезвия

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
350 g
Артикул:
178000011
Описание
товара

Это высокое качество, красиво закончил углеродного волокна Flybarless основные лезвия для 600 / .50 размер вертолета.

Разработанный специально для использования с более популярными вертолетами Flybarless, аэродинамический профиль и баланс веса этих лопастей была оптимизирована, чтобы дать вам наилучший циклический отклик и контроль для вашей модели.

Несмотря на то, разработан специально вокруг бесфлайбарной приложений, эти ножи могут быть использованы на стандартных моделях Flybar вертолета, а также. Они выделяются в ФАИ / FC3 Полетом стиль при использовании традиционных моделей сервоось вертолетов.

Хотя большинство из этих лопастей прекрасно закончили, они продаются как "отделкой B-класса" лезвий что означает, что может быть немного перерасходу материала или нечеткое линий краской. Это никоим образом не влияет на качество / производительность этих лезвий и наиболее выглядеть безупречно, несмотря на который продается B-класса.

Вы не найдете лучшую цену на основных лопастях этого качества в любом другом месте!

* Идеально подходит для использования с HK600, Trex 600, Raptor 50, логотип 600 и другие 600 / .50 размер HELIS.

Технические характеристики:
Длина: 600мм (отверстие для болта до кончика лезвия)
Вес: 128g каждый
Болт отверстия: 4 мм
Сжатие: 12мм (включает в себя 1мм прокладки , чтобы соответствовать 14мм лезвие ручки)

Пожалуйста , обратите внимание: шаблон может варьироваться в зависимости от показанного на рисунке.

Product
Specifications

Дополнительная информация

  • Артикул:
    178000011
  • Brand:
    Нет
  • Емкость ( мАч )
    Не применимо
  • Вес ( г )
    350.00
  • длина:
    620.00
  • ширина:
    12.00
  • Высота
    60.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Put a set on Trex 600DFC, I couldn't be happier with the quality and performance. Hopefully HK will be stocking them for a long time because I will be buying them again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i can't get over the quality of these blades for the price i'm going to change all my helis to rjx blades they are stiff and well finished
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have to add some comments to the first review. Made a testflight with my T-Rex 600 ESP and had terrible Blade-Tracking with the RJX-Blades. With my former Blades (Blattschmied GCT Expert) I had absolutely no problems. Changed back, and tracking was good! With the RJX-Blades I had also vibrations on the Rotorhead, although they got balanced. Guess the vibrations are a result of the bad tracking. Guess the two blades are a bit different.
Actually I'll try to make a RMA.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got the Blades yesterday, but they are far away from "High Quality". As assumed, the painting was not perfect, but that is not the problem.
Balancing them was quid a hard job, because one blade was a bit heavier. Only a 5cm wide Tesa-Film balanced them.
Lets see how they fly, hopefully better.

br
Chris
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought a set of these for my Trex 600 pro. Finish on them is pretty good with only slight smudging here and there on the lettering. Not happy with the carbon though 1 one of the blades creaking when gently twisted by hand. Other one was solid and had no movement at all. Not happy putting them on the 600 so returned them under RMA. Cost me nearly 6 postage and then lost out on the refund due to the exchange rate changing. as the refund was in dollars. RMA took over a month so not at all pleased.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use these on my Blade 600X. Very Nice blades. Needed a little extra balancing out of the box. I think I'm going to stick with these. They're a nice medium between the super cheap and the expensive blades. No complaints at all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is very good looking blades. Hav a few paint smears, but it's barely visible. Finish is further good. As well as good balacned
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
muy buena terminacin rendimiento.-
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very pleased with these. Got the latest paint scheme (not the one pictured here) like the RJX 430mm blades HK also sells, that are black at the grip. They have a 55mm cord, so should be great for autos. I'd love to see some of these in 520mm and 550mm also.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good quality even for hard 3D .I have not noticed any differnce between align 3g.

The price is much better.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.