Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

70mm EDF истребитель - Стекловолокно 620mm (ARF)

70mm EDF истребитель - Стекловолокно 620mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
2489 g
Артикул:
189000001

Combine

essential items and
esc
battery
servo
motor
acc
Описание
товара

Hobbyking 70mm EDF истребитель, безусловно, выглядит часть, и в результате качество строительства, очень способный высокая скорость модель струи. Эта струя был разработан, чтобы быть DogFighter и эта модель спортивные состязания все движущиеся стабилизаторе и хорошего размера элеронов, чтобы дать пилоту вид maneoverability, что этот боец ​​известен. Крыло / строительство лифт пены ядро ​​/ лист бальзы, фюзеляж, потребление, сени и вертикальные колото являются составными, крышка вентилятора является съемной и лист eflux трубка включена.

Это доступный и практичный высокая производительность масштаба струи, которая даст вам много часов удовольствия, 70 мм вентилятор блока входит и общая стоимость сборки должна быть низкой для такой хорошей модели качества. Отличный внешний вид, низкая стоимость сборки, качество строительства, большой флаер и, конечно, баллистические характеристики, что еще вы могли бы попросить!

Технические характеристики:
Размах: 620мм
Длина: 985mm
Полетный вес: 1200g ~ 1350g
70mm EDF

Включает:
70mm High Speed ​​EDF блок с 4 мм и 3.17mm адаптер
Все комплектующие
Eflux Tube
Переводные картинки
инструкции

Требуется:
Ваш собственный 4-канальный TX / RX
4 х высокого крутящего момента MG Micro Servo
28mm EDF безщеточный 3000kv Мин
60A ESC
Батарея 2200mAh ~ 2650mAh 4с LiPoly

Product
Specifications

Дополнительная информация

  • Артикул:
    189000001
  • Brand:
    Не применимо
  • Вес ( г )
    2489.00
  • длина
    935.00
  • ширина:
    180.00
  • Высота:
    265.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This airplane is under-powered with a 4s set up. I installed an E-Flite 15 brushless motor with a Turnigy 4s 2650 mah, 14-blade EDF unit. Thrust output was well below anticipated thrust. I suspect the duct opening is too small and not enough air is getting to the motor. Bench check the motor set up and the thrust was incredible. Again, I suspect the duct inlet is too small. Anyone come up with a solution for more thrust?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well I got mine and the packaging was great. I too dint have instructions however did download the slides from the international file of this same plane. I have had it for a month and have it built. Do want to do retracts but the F-16 ones I have found put the retracts in the intake. It's to thin to do that. I'll figure something out. I. Like the plane and would recommend to someone with time and the skills to adapt the balsa for your needs.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice kit. A few issues:<br>

A bit heavy.<br>

Needs a fair bit of build experience.<br>

Wing and elevator covering is good but it's painted and easily chips off.<br>

My setup:<br>

Change Sun 10-blade EDF<br>

Turnigy L2855 2300Kv motor on 5S<br>

Nanotech 2200mah 45C 3S and 3S in serial<br>

Turnigy 60A Plush ESC<br>

HobbyKing 939MG servos for elevators<br>

HobbyKing HXT-900 servos for ailerons<br>

COG 77mm from leading edge of wing where it joins fuselage.<br>

12mm elevator throws 25pcnt Expo<br>

5mm ailerons throws 25pcnt Expo<br>

Weight ready to fly 1320g<br>

Unflown. Maiden when the weather is favourable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It finally took the air after an unlucky first attempt during which I broke a wing. It has to be bungee launched with my setup to get a good elevator response on start.
Setup:
- EDF FAN 6904
- Motor: HET 2W20
- LiPo 3300mAh turnigy 30-40c
- 100Amps ESC
- CG 70mm at wing root
- Elevator 18mm travel
- Airleron 7mm travel

Behavior in flight is pretty good but need to be trimmed pitch up. Plane is fast and you easily lost him if you go too far away due to its small size....
First landings are a bit hard as the plane is coming fast but after few runs you are able to master beast ! :)
Nice little jet with good flying characteristics for the price, I will recommend !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
To make a long story short: I do not recommend Hobby King.
You will be better off supporting your local hobby shop where your SERVICE will be better and they will take care of you-unlike HK.
This purchase shall be the last -so savor the flavor HK -I am done.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My order just arrived and the directions did not come with it. I specifically ordered it because the product description said it came with building directions...unlike some kits that do not.

Also, to add to my nice day (sarcasm) the plane came with a not-so-good packed airplane and one crushed right wing tip.

What a bummer...I will keep you all posted here on how HK handles this matter. I will not hesitate to tube this if i get burned.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok first off there are no directions. Alot of the assembly is up to you for example its not clear where the edf unit goes or how it mounts. Same with the servos, there doesnt seem to be spot for them. The canopy doesnt have any way to mount it that I can see. It comes with magnets but where do they go? No landing gear, you get what in the images and nothing more. It will be a fun project for some and something that never gets in the air for some others.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [26kb]
Tiger Stripe download now [575kb]

Combine

essential items and
esc
battery
servo
motor
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.