Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

900MHZ 1500mW Tx / Rx & 1/3-дюймовый CCD камера NTSC 520TVL

900MHZ 1500mW Tx / Rx & 1/3-дюймовый CCD камера NTSC 520TVL

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
665 g
Артикул:
9171000008
Описание
товара
12 видеосистема Канал 900Mhz Tx / Rx с ПЗС-камерой.
Мощный 1.5W (1500mW) питание Tx! В отличие от других систем общего, мы подготовили жгут проводов и включила его с камерой, так что Tx и камера будет совместима и на том же напряжении.
Если вы покупаете камеру и Tx отдельно полярность вилки и напряжения могут быть очень разными.

В комплекте.
1 х SONY CCD 1/3-дюймовый камера
1 х 900Mhz 8-канальный передатчик видеосигнала (1500mW)
1 х 900Mhz 12-канальный видео ресивер


Камера спецификации.
Устройство изображения: 1/3-дюймовый Sony Super HAD CCD цвета
Pixel: 752 х 582 (NTSC)
Синхронизация: Внутренняя синхронизация
Горизонтальное разрешение: 520TV Lines
Минимальная освещенность: 0.1Lux / F1.2
Отношение сигнал / шум: более 48дБ (AGC OFF / B / W OFF)
Баланс белого: Автоматическое отслеживание баланса белого
Компенсация Автоматическая подсветка: ON / OFF переключаемый
Объектив: 3.6-6mm
Входное напряжение: DC12V
Электрический ток: 80MA ± 5мА
Электронный затвор: Авто
PAL: 1/50 до 1 / 100,000 секунд
Видео выход: 1.0Vp ~ p75Ω
Операция Temp .: -10 ~ + 50
Размер: 38 х 38 мм
Напряжение питания: 12В / 150мА
 
FPV Tx Spec.
Источник: 8-Ch, синхронизация А.В.
Мощность: 1500mW
Входное напряжение: 12V
Вес: 18г
Размер: 73x41x14mm
Частота: 0.9g 0.910G, 0.980G, 1.010G, 1.040G
Product
Specifications

Дополнительная информация

  • Артикул:
    9171000008
  • Brand:
    Нет
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    665.00
  • длина:
    185.00
  • ширина:
    70.00
  • Высота
    151.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Everything worked out of the box. The camera was indeed 12V since it has a 78L15 regulator on it. This means that it can accept up to 15V and down the voltage to 5V automatically. The picture was good and no problems so far. Heat wise, the receiver was a bit warm but neither the Tx or the Rx were hot to the touch.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got mine today, works great right out of the box. Did not need to swap any wires and/or add a bec for the camera as mentioned in previous posts. I also purchased a wide angle lens, definitely worth it. :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My camera came complete and worked the first time I hooked it up without any modifications. I guess that HK was listening to all of your complaints. All that is missing is a 12v BEC.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Also had to flip red and white wire at the camera. That's why I gave only 4 stars for overall and quality. Once you do that, it does work great though. So again, the wire harness for the camera was wrong on mine (as well as many others it seem!). Simply flip red and white and it does work. Transmitter is very heavy (very heavy case). Receiver has single output (would have been nice to have two).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome set-up, did check the wiring before 1st use, everything was ok...

Excellent kit for the money, got to 1KM without a glitch using skew planar & clover leaf antennas....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1.5 w video out is great for LR FPV, gr8 product
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
of the start i checked that the unit powered up . then after it did i removed the case and covers from the circuitry for a once over and all looked fine. at first glance the unit appeared to be a refurbished one. with a few new resistors and some flux still on the board , after an alcohol wash it was good to go back to the case. but i did add some thermal grease to the transmitter side opposite the led display , so better heat transfer could occur and less chance of overheating . dont forget to install he wedges on the led side to push it towards the thermal paste :)
there really was no difference between this and the other brands i own that have the same cases . for the price it was a fair deal. buy they really need to make everyone aware about the wiring harness issue for the camera !!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Purchased this setup and received my order in the USA in 10 days from order. I swapped the red and white wire going to the camera on the harness, applied 11.3 volts to it from a 3S LiPo and it works great. Clear picture!! The transmitter case is very very nice. I have not yet tested the range with the stock antennas, but I will update this soon when I do. Great Job!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
THIS DOES WORK! OK, so I ordered this product a couple months ago, and up until yesterday I was stumped. I have finally got it working! IN ORDER TO MAKE THIS WORK, YOU MUST SWITCH THE RED AND WHITE WIRES TO THE CAMERA. THE BLACK WIRE IN THE MIDDLE STAYS IN THE MIDDLE. YOU CAN DO A QUICK TEST OF THIS BY PLUGGING IN THE CAMERA CONNECTOR UPSIDE DOWN. THERE IS SOME METAL FOR THE ELECTRICITY TO THROUGH. SO JUST TAP IT DOWN ON TO THE PINS AND BE AMAZED!!! I GOT A CLEAR PICTURE ON MY TV SCREEN FROM THE TX TO THE RX. I do not believe a voltage regulator is necessary. Like this so people can be informed!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
THE CAMERA WAS DEAD ON ARRIVAL.. I USED 5VOLTS FIRST THEN 8.4 THEN 12.6...NO LUCK I HAD TO USE A SECURITY CAMERA FOR NOW.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.