Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global

9103MG Metal Gear Servo 5.6g / 1.0kg / .12sec

9103MG Metal Gear Servo 5.6g / 1.0kg / .12sec

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

733,93 руб.
Stock:
Вес:
15 g
Артикул:
9103MG

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Описание
товара
9103MG Metal Gear Servo 5.6g / 1.0kg / .12sec
Сверхтонкий, мини серво.

Вес:
5.6g
Размеры: 21 х 20 х 8,5 мм
Крутящий момент @ 4.8V: 1.0kg см
Скорость @ 4.8V: 0.12sec / 60deg @ без нагрузки
Коробка передач Тип: Металл
Product
Specifications

Дополнительная информация

  • Артикул:
    9103MG
  • Brand:
    Нет
  • Вес ( г )
    15.00
  • длина
    80.00
  • ширина:
    8.00
  • Высота:
    67.00
  • Скорость (п / 60deg )
    0.12
  • Крутящий момент ( кг ) (мин . 0,01 кг )
    1.00
  • Unit Weight (g):
    5.6
  • А ( мм ):
    25.00
  • В ( мм )
    20.00
  • С ( мм )
    22.00
  • D ( мм ):
    10.00
  • Е ( мм ):
    27.00
  • F ( мм )
    14.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
High quality servo for that category.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this servo 4 PCS for my walkera helicopter,
inculding tail that one servos,
works well, now still working,
for this servo can work over 1 year with metal gears,
and this price is good, for my personally is recommend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
one of the two used servo's broke down during the maiden flight. The total operating time was about half an hour. Very disapointing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought it before, works fine with 5.0V BEC came out, and it's not digital servo, but for most of receiver workings fine,
some people might want to use it at tail servo, but I am not recommend, as it must be narrow bend, this one is general analog servo, but whole metal gears, this is good one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gutes Servo. Haben schon eineige keine Props.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
so bad!!!

i use versus composite dlg!!

but.. do not use...

to bad!!!!

not good!!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have two of these. The first one is amazing! It controls both ailerons in a 3D airplane with 900mm wingspan. I crash a lot learning 3D, and I kept stripping Pico servos. I put in a 9201MG and it has performed flawlessly for nearly 2 years, and I have flown it a LOT.
The second controls the rudder of my DLG glider. This gets some stress on launch and landings, and again replaces a Pico. This one is a bit broken - it hunts around, possibly because a gear is worn or broken. It still works but I should replace it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased a couple and am a bit disappointed. They actually weight 6.4g with the output arm, and there is an average amount of slop (say approx 0.5mm at the end of the 15mm long output arm, about 2 degrees) in the geartrain.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 6 of these. 4 of them jittered randomly right out of the package. The others seem to operate OK on the bench.

They all came with the servo horn screws tightened tightly into the output shaft. I had to hold the shaft spline with a tiny pair of needle-nose pliers to be able to remove the screws. On several of the servos, I buggered up the spline in the process. So be careful!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
after half year, my 9103MG servos are work okay, I am going to buy new 3PCS again for my new air plane, good cheap little servo
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.