Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

AD-C5 Micro Motor Вес 4,6 г 3700Kv

AD-C5 Micro Motor Вес 4,6 г 3700Kv

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

882,90 руб.
Stock:
Вес:
35 g
Артикул:
AD-C5

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара
Микро 4,6 г Детали двигателя скороход.
Сверхтонкие пластин статора и серебряной проволоки оказалось очень плотно делая это хорошо исполняющей микро мотор!
Вес: 4,6 г
Размер: 14 х 12 мм
Вал: 1.5mm
Kv: 3700rpm / v
Поддерживают: 2510 или 3020
Setups;
Поддерживают: 2510
Максимальное напряжение: 8
Макс Amp: 2.8A
Упорный: 90g
Поддерживают: 3020
Максимальное напряжение: 8.4
Макс Amp: 1A
Упорный: 49g
Product
Specifications

Дополнительная информация

  • Артикул:
    AD-C5
  • Brand:
    Нет
  • Вес ( г )
    35.00
  • длина
    75.00
  • ширина:
    17.00
  • Высота:
    70.00
  • Kv ( об / об)
    3700.00
  • Max Токи (A)
    0.00
  • Мощность (Вт ):
    0.00
  • Длина В ( мм ):
    17.00
  • Может Длина D (мм )
    5.00
  • Максимальное напряжение (В )
    0.00
  • Вал А ( мм):
    2.00
  • Unit Weight (g):
    4.6
  • Диаметр С ( мм )
    14.00
  • Общая длина E (мм )
    17.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought four of them for my submicro quadcopter.
The motors are terribly out of balance, the bearings are crap as well.
On two of them the bell is jumping up and down during rotation.
These make such a vibration on the frame that the FC is hardly able to keep
the quad flying.
The motor cables are so thin and nearly unable to solder.
I bought many products from HK but this is far the worst of all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1S, GWS 5x3 - enough to hoover my 35g indoor plane
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Receiver 3 of them, 1 did not work, 2 other work fine. IMO price to high for such quality
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good for 50 grams models
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing power out of 4.6g :-O

With 2S ideal for ~50g Shockflyers.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great little motor its so cute. I haven't tested it yet but its quality is good it had a little wire sticking out of the winding but it seems to have disappeared and it comes without connectors. It comes with a motor mount and it dose not include a prop saver so get the one for the "C10 motor" and put some shrink tubing on the shaft and it works great.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi,

I have just measured the AD-C5 3700KV Micro Motor shaft, it is:

The shaft is 1.48 mm / 0.058 inch in diameter.

The motor shaft is 17.14 mm / 0.675 inch total length, from front to back.

There is 6mm / 0.236 inch of useable prop shaft protruding from the front of the motor bell.

The motor shaft is retained on the back (stator) by a small circlip / e-clip (my motor shaft slides easily in the motor bell - will need a thread locker or glue to stop it sliding / rotating)

The motor bell (rotor) diameter is 13.88 mm / 0.546 inch

9.95 mm / 0.392 inch from rear mounting face to front face (front face / prop hub - just a small flat 'locator ring' surface 4 mm / 0.158 inch diameter by 1mm deep)

The three motor wires are very fine, extensions of the motor windings, the length is 42 mm / 1.65 inch heat shrinked and 47 mm / 1.85 inch total length.

The weight including the motor wires is: 4.4 gram / 0.155 ounce.

Hope it helps,
Have Fun !

Mark S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
with the little 3x2 prop this little guy screams. its like a a little ducted prop the way i have it set up its cute :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
pour tout avion jusqu''a 60Gr c'est parfait pour le micro indoor :p
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
soft shaft, it is easy to bend.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.