Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

Angel 920 RC Парусник 1840mm (подключи и парус)

Generating Links

Angel 920 RC Парусник 1840mm (подключи и парус)

Цена:

Now save сохранить 0,00 A$ 0,00 A$

220,68 A$
Уже купили Discontinued Product

Please continue searching for a similar product.
Артикул:
113000052-0
Хотите бесплатную доставку? кликните сюда Узнать больше!

Отвлекитесь от нормы, сесть и дать RC парусники попробовать. Не ошибаетесь, думая, парусники медленно и скучно. В сильный ветер, они могут быть очень быстро и выполнять повороты быстро, оказывается очень интересной. HobbyKing приносит вам ангел 920, идеальный способ войти в захватывающий мир RC парусных судов.

Ангел 920 парусная лодка приходит подключи и парус готов. Просто установите свой собственный поверхностный радио-2 канала, полный окончательной сборки и вперед! Смоделирован океанских гоночных яхт, корпус Ангела отлита из стекловолокна композитного материала с совершенным гелькоут и яркой эмалью краской. Поддерживая красочно напечатанный рип-стоп нейлона главный парус является прочным алюминиевым главной мачты. Все необходимые элементы установлены, в том числе грота лебедки, усилитель руля, такелажа, парусов и аппаратного обеспечения. Защита ваших дорогостоящей электроники является устойчивый люк воды, скрывается за поддельного пассажирском салоне. Переодевание модель несколько масштабных детали, как рулевое колесо и палубные рельсы.

Взвешенный киль стабилизирует Angel, даже в сильный ветер, но она будет продолжать идти в легкие ветры тоже. Если вы планируете плыть преимущественно при сильном ветре, взвешенное киль имеет полую полость, которая позволяет добавлять дополнительный балласт если вы этого хотите.

Позволяет голову к док-станции и посмотреть, что она может сделать. В теплый летний день нет ничего лучше, чем сидеть, расслабляющий с холодным напитком и испытать острые ощущения от парусного Angel 920.

Особенности:
• Подключи и парус - Установите ваш выбор приемника и батареи
• Литой корпус из стекловолокна
• Красивый высокий глянец отделки окрашены
• Блестяще напечатанные нейлоновые парусов рип-стоп
• Предварительно установленный руль и парус лебедки сервоприводы
• Съемный киль
• Деревянный дисплей с подставкой
• Алюминиевая основная мачта

Технические характеристики:
Длина: 920mm
Высота: 1840mm
Ширина: 200 мм
Площадь парусов: 0.40m2
Проект от ватерлинии до нижней части киля: 350мм
Rig Высота от палубы до верхней части мачты: 1400мм

Необходимые:
2+ канальный передатчик и приемник
4.8 ~ 6.0V батарея приемника

  • Angel Sailboat
Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

Toylander | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2016

Excellent introduction into the world of sail boats, at a very reasonable price, just add your own receiver, an rx battery and ballast the bulb and you will be sailing in no time. It does what it says on the box. Given my first one, now bought a second one so we can have races.

Once you know what you are doing you can upgrade the rigging and fittings, the only mod i would make straight out of the box is the mast joiner, i made one from hard wood 150mm long to stop the wobble.
You will need about 1500 grams of the smallest lead shot you can get and some resin , i used acrylic with worked well but takes a long time to set.

Greg | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 09, 2016

Having had this boat for a few months now, here are my comments. The hull is excellent, well moulded and stiff. The keel bulb can take about 1.4kg of lead shot which I kept in place by pouring epoxy into the bilb. The keel fin is very flimsy and bends sideways alarmingly when the ballast is attached. I made a new fin from Douglas fir sheathed in glass cloth - much stiffer. The joiner for the two piece mast is too short and gives no rigidity to the join. I replacd it with a 6" length of wood shaped to fit inside the mast. I replaced the rigging with wire and turnbuckles and replaced the rubbish spreaders with a single set of proper spreaders at half height plus a set of lower shrouds. I also replaced the mast crane with a longer one. With a decent rig, the boat sails pretty well. The winch has too much travel and I only need half the movement of my transmitter stick to go from fully in to fully out. I am thinking of making a new mainsail as the stock one does not set at all well. Overall, good value for money but it does need some fettling to get the best from this boat.

Ноябрь | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Nov 10, 2014

First navigation, just great, virtually no wind but already good speed.
I put 1,550 Kgrs Lead in the torpedo, it's perfect

Brett | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2014

Great new boat from the Shunbo Range, a good match for the Phantom. The wide beam and aft section of the hull gives it the most modern shape of the fleet, and longer nose section in relation to the Jib gives it more stability downwind. As with all the range several mods are required to make this a reliable craft, such as adding internal foam buoyancy (sinking prevention), waterproofing the 2 Servos, adding 1.6kg or more lead ballast. The plastic mast crane needs to be replaced with one that extends 80mm rearwards so the backstay clears the Mainsail. (see file section for photos). Optional mods include replacing the plastic chainplates with 3 position alloy ones. With a 3S 800mah LiPo and UBEC supplying power, I get 8hrs run time. Consider getting a spare Monsoon Mast and Sailset to run as a smaller "B" rig in heavier (12 knots) conditions. See Shipshape RC for lots more information.

pilotoheavy | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Jul 31, 2014

va arribar amb la cabina i tapa dels servos trencada. d'origen i no per el transport. construccio fora matusera

David | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Jul 26, 2014

just set this boat up (07/24/2014). this is my first and must say It is very nice boat, so nice it may never see water only cause it is a very impressive piece to look at.

mxhead692 | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2014

Boat comes well packaged and looks great, however, there was supposed to be a plug in a small hole in the stern (my cousin also bought one, his has the plug in it!), I didn't notice the hole, boat filled about halfway with water when I tested the boat in a swimming pool for about 15 minutes, and now the winch servo is TOAST! Servo has an O-ring so it's SUPPOSED to be waterproof, or at least water resistant, but it's not! Only replacements are in 'international' warehouse so shipping cost would negate any savings over a $50 Hitech servo. Not a happy sailer here Hobby King!!!

bill987 | Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 03, 2014

Bien emball. Tout simplement superbe navigue trs bien mme par gros temps

Файлы клиентов
No File Name Download [42]
No File Name Download [100]
No File Name Download [54]
Manual Download [18]
Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!