AT-6 Texan ж / закрылки, втягивается, осветительные приборы и системы двигателя звуковой модуль 1300мм (ПНФ)

• Overall
• Quality
• Value

Customer Rated

Oct 24, 2015

I have this model for over a year and a half now and is still my favorite. It has quite stunning appearence in the air of much larger model because of very steady and scale flight. It deffinitely attract looks on the flying field.

I'm using 3 Ah batteries for 10 minute flights, and after some considering, I disabled the centre section flap since it didn't work properly (ermainde always at lest a little bit extended), and didn't want to add a third servo just for the central flap.

Also, I removed the pilot figurine and never installed the sound system since both seem too heavy each on it's own, let alone put together in the model of this size.

In this configuration this is a great flying model. The problem is, of course, HK doesn't carry replacement parts, which is a shame...

• Overall
• Quality
• Value

Customer Rated

Sep 22, 2015

Great plane and very detailled ! not for a first experience only for pleasure and not Learning fly ! this is my FIRTH plane EPO and destined for show cause his color is an amazing in the sky ! model is not very ofen acting in plane show, so gratefully !

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 25, 2015

Brilliant aircraft. I loved flying this and with the sound module was definitely a new dimension added when flying.



My advise for anyone who is purchasing this would be to ensure your CG is correct (follow the instructions) and remove the foam panel behind the main gear you will notice that where the wooden wing spars either the centre section of the wing the panel is glued to paint. I suggest sanding the paint and reapplying a strong glue/epoxy to save your aircraft from the wings folding during flight. https://www.youtube.com/watch?v=4J9jjv1z9Nc



And lastly to check your servos, possibly replace the preinstalled servos with a metal gear type, unfortunately my aileron servo stripped and could not pull it self out of a roll. Fortunately it is repairable. very durable plane. and looks great

• Overall
• Quality
• Value

Customer Rated

Aug 21, 2015

Received mine last week and unpacked it. Very good quality mouldings which fit together nicely. i have done the dry fit and tested the sound generator - awesome noise but will need a little programming thought to get the best visual and audio effect - should not be a problem on the Taranis.

I will put it together next week and report back - i think I will be smiling.

• Overall
• Quality
• Value

Customer Rated

Aug 19, 2015

OK, Where to start. I, like many others have crashed this plane due to wings snapping off. I love flying this plane but you MUST REINFORCE THE WING. I used a piece of plywood, epoxy and 4 screws to joint the wings together. DO NOT fly this plane unless you connect the wing spars together or you will loose a wing. I also added a couple of carbon fiber rods into the wings for extra rigidity. You can do this by sliding them in next to the channels for the servos. I have not had to many issues with tip stalls but I keep some speed up when in the turns. Landing is fairly easy with some flaps or without. Speed is key. Do a quality check on everything out of the box. Loose screws, missing parts all kinds of stuff gets overlooked. Once you do all of these quality related items this is a great flying model.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 14, 2015

I love this plane however you will need to do some research on how to beef up the wings. My first one crashed due to a very poor wing spar design. NOTE: Connect the two spars together or you will snap a wing off.

• Overall
• Quality
• Value

Customer Rated

Aug 02, 2015

ESC does not bind right out of the box so I can not give a review until I get a new ESC.
Waiting on Hobbyking to respond, about esc Will have to get a new ESC from local hobby shop if I want to fly in near future _ May change my review after I get a new esc and fly

• Overall
• Quality
• Value

Customer Rated

Jul 07, 2015

Now after a couple flights, I find it very nice looking in the air and on ground, I get a lot of compliments. But, I found out the hard way that it is a little under-powered and required a good length of runway and build-up speed to take off without it stalling and falling. It is also very susceptible to cross wind so be Sure to Take Off DIRECTLY INTO the wind, if any. Once in the air, it is a pleasure to fly, but it is no speed demon, which is actually ok, the real plane was no big aerobatic performer either, just a trainer. On landing, it comes in a little hot, but first stage flaps are mostly all you'll need, remember, it needs a good bit of air over the wings to keep from stalling and falling. Have no doubt, this is Not a good plane for beginners! Overall: NICE PLANE!

• Overall
• Quality
• Value

Certified Buyer Rated

May 29, 2015

Problems with the motor but I resolved it. Problems with a loose retract that pulls to the right on taxi or land.

Paint chips a lot.

Retract is the big deal for me. Can't taxi and must land in the grass.

Had more details but the website timed out. Please ask if you have questions. A replacement retract would be nice but I don't want the stress of convincing with customer service.

• Overall
• Quality
• Value

Customer Rated

Dec 04, 2014

I like it. The looks and the sound system makes this plane stand out. Good wheel landings, does not tend to nose overs like so many tail draggers. The space for fitting everything inside is limited, but it can be done. The centre flap is useless, I deleted it. Landing lights look great as well as the nav lights. It is a slow scale flyer, so if you are a speed fiend forget it. Quality would have been tops if it weren't for the poor paint job. Paint rubs off and there are different shades of yellow on various parts. One day it will have to be repainted.