Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

BA BL290S 1200kv Brushless Походный 45g

BA BL290S 1200kv Brushless Походный 45g

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
75 g
Артикул:
BA-BL290S
Описание
товара

BA BL290S 1200kv Brushless Походный 45g
Kv1200
Вес: 44 г (1.55oz)
Размер: 29мм х 15мм (1.14in X 0.59in)
Диаметр вала: 3.0mm (0.118in)
Фаза: 3
Полюс: 14
Сопротивление: 0,20 BR> Индуктивность: 0.053mH
Нет ток нагрузки: 0.5A
Ток нагрузки: 25А
Терн: 16

Product
Specifications

Дополнительная информация

  • Артикул:
    BA-BL290S
  • Brand:
    Не применимо
  • Вес ( г )
    75.00
  • длина
    0.00
  • ширина:
    0.00
  • Высота:
    0.00
  • Kv ( об / об)
    1200.00
  • Max Токи (A)
    0.00
  • Мощность (Вт ):
    0.00
  • Длина В ( мм ):
    33.00
  • Может Длина D (мм )
    14.00
  • Максимальное напряжение (В )
    0.00
  • Вал А ( мм):
    3.00
  • Unit Weight (g):
    44
  • Диаметр С ( мм )
    30.00
  • Общая длина E (мм )
    40.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
a little grindy.pooor craftsmanship.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got just faulty, the wires inside the motor is defective.
The wires are not fixed. When installing all the same break would be.
True motor is not rusty ... and it pleases me very much, I'll throw in the garbage is not rusty motor ... $ 20 : (
I want to put 0 stars.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The motor came damaged, more grinding than rotating.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have bought this expensive out runner but can't fly due to motor shaft Loose. Im tried to fix it, but the track for setscrew damage. I think expensive is good. But actually expensive is bad.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
excellent motor goes well on my glider with 3 cell 2600 Mah Lipo well worth getting and packed very well good one hc
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Este motor, proporciona un rendimiento aceptable, pero tiene un problema: el soporte o bancada.

Al ser de aluminio de dudosa calidad,y de poco espesor , se pasa de rosca con mucha facilidad con lo que resulta inutilizado para la mayoria. Adems, su dimetro no se ajusta facilmente, a otro soporte.

No lo recomiendo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good motor have had no problems with it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought one. When unpacked unit was rusted so much that I couldn't rotate the shaft. pulle dit all apart and cleaned it/wd40 etc etc blah blah - conatcted support but as usual by th etime you send it back and they stuff you around its not worth the hassle or drama. So once again HC stuff is not cheap in the long run
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What a con!

Motor rotor (can) was actually rusted to the stator - rusted as in "I couldn't rotate it by hand". There were no grub screws fastening the rotor to the shaft and only one of the grub screw holes was actually threaded.

An expensive outrunner by the time you tap the other grub screw hole clean the rust off, chase around town to find grub screws that fit etc etc

NEVER AGAIN!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
used this motor for 2 years (approx. 50 flight)in a twin 3.5 lb.on 3 lipo

or 3 a123 and 4 a123

7x6 prop at 12 amp(each)about 30 ounce thrust

nice smooth running bearings.Motor no good for prop over 9"
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.