Looking for some special offers in the US? We're offering these featured RC Planes and Cars exclusively for our North American customers.
-
-
H-King (PNP) B-17 F/G Silver Flying Fortress V2 (1875mm)
Our fantastic model is simple and fast to assemble right out of the box with all of the servos and ESCs pre-installed. It is made from EPO foam, so it's as tough as you would expect and as the one-piece wing is removable, it is also very practical to transport.
But it's the attention to detail on this version that is impressive. Panel lines have been reduced and two new accurate scale color schemes are now available. Olive drab/grey and overall silver. These two schemes represent the vast majority of B-17's that went into action and as an additional feature, we've also included a choice of two 8th Air Force decal sets for each color scheme as well as an optional chin turret so that you can create either an early "F" or later "G" variant.
Features
- Scale outline
- Authentic color scheme
- Choice of decals
- Optional chin turret for "G" variant
- Servoless retracts
- Flaps
- Operating navigation and landing lights
- Powerful 900Kv motors
- Counter-rotating props
-
-
H-King (PNF) Avro Lancaster V3 "Dumbo" British WWII Heavy Bomber (1320mm)
The V3 Lancaster is designed to be the most lightly loaded version of this classic model and therefore the best performing, it is a 'Lightweight, Heavy Bomber', that's hand launch-ready right out of the box. A differential thrust set-up for added yaw control and far more realistic flight performance is the key recommendation to get the very best out of the model, but she'll happily fly on throttle, elevator, and aileron control alone. The V3 Lancaster can now achieve up to 7 minutes flight time on a 1400mAh 3S, but still has the option of an electric retractable undercarriage for those that wish to have it. Weight over the earlier versions has been further saved by removing the opening bomb-bay door mechanism and servo, complete removal of the undercarriage, and removal of the tailwheel steering servo. This lighter weight makes hand launching a simple and trouble-free affair, slow, and realistic scale flight is greatly improved for those low, slow bombing passes, and less power is required meaning greater flight times.
The fully molded EPO foam "Plug N Fly" Lancaster V3 comes pre-painted with scale panel lines, the decals are factory applied, motors and ESC's are pre-wired and installed, the elevator and aileron servos are also pre-installed. Assembly is very straightforward, the canopy, gun turrets, and .303 machine guns need to be fitted, servo pushrods installed, and the tailplane needs gluing in place. Scale 3 blade propellers with spinners and molded cowlings finish off the Lancaster's stunning scale detail which makes this a practical, must-have model for any scale or warbird enthusiast. Battery and radio access is very easy through the bomb-bay doors and these are held closed while flying with some strong permanent magnets. The two-piece wing simply slides onto the wing joining spars and is held in place with two screws. However at 1320mm, the Lancaster is very easy to transport in one piece, so if you wish, the wing can be glued in place too for extra security.
Features
- Plug N Fly, just add receiver and flight battery
- Thin plastic gear door 'skid plates' pre-installed for belly landing operations
- Fully molded EPO airframe with scale panel lines
- Detailed graphics and finish in authentic Bomber Command 619 Sqd "Dumbo" color scheme
- Lightweight out of the box set-up for slow, scale, realistic flying
- Intended for use with differential thrust set-up via modern radio transmitters for yaw control
- Option for fitting electric servoless retracts
-
-
H-King Rattler (RTR) 1/8 4WD Buggy V2 with Upgraded 80A ESC
There are many quality features supplied in the Rattler V2, including an upgraded 80A ESC. Not only is it strong, but it has a steel spur gear, metal gear diffs front, center, and rear, pivot ball suspension all round, and threaded adjustable oil-filled shocks. Also included is a dust-proof receiver box that houses the ESC and servo to help keep your electronics in tip-top condition.
With the new upgraded 80A ESC, and improved 2700KV motor you can confidently run this buggy on 3S, but be warned, the Rattler is deceptive, on 2S it is quick enough for most, but on 3S it's really venomous!
Features
- Now with a more powerful upgraded 80A ESC, and high torque 4 Pole 2700KV brushless motor
- Supplied with an HK-GT2E transmitter, receiver, and high torque 9kg steering servo
- Sealed front and rear metal gear diffs.
- Pivot ball suspension all round with adjustable oil-filled shocks
- Dustproof box for ESC, servo, and receiver
- Lightweight reinforced composite chassis
- Active Rear Toe system
-
-
MN Model 1/12 4x4 D90 Trailing Car (Kit) (MN90K-Red)
Get your easy to build MN Model 1/12 scale 4WD D90 Trailing Car and head for the bush. This is a great model that has a very realistic look and comes at a great price for the beginner and experienced modeler.
It has a well molded ABS shell that looks just like the real thing with lots of scale details and oversized soft tires to give you all the grip you need on the trail or cross country. The engine bay provides an excellent place to put all your electronics. As a kit you have to build it but it is an easy build and the model comes with a brushed motor, servo and LED lights so all you require is a brushed ESC and battery plus radio TX and RX to get you moving.
Features
- Scale Details
- Working lights
- ABS shell
- 4WD
- Realistic soft, oversized tires
- Comes with servo and motor
Hear it First: Join our Mailing List
Sign up to receive new product updates, exclusive discounts, news, and more!
