New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Голубая стрела 2.8g High Speed ​​Micro Servo.50kg /.09sec

Голубая стрела 2.8g High Speed ​​Micro Servo.50kg /.09sec

Now save сэкономь 0,00 руб. 0,00 руб.

258,81 руб.
Статус:
Нет в наличии!
Вес:
13 g
SKU:
019000007-0
WANT FREE SHIPPING? Click here to find out more!



Этот небольшой аналоговый сервопривод подходит для микро применения внутри помещений. Мощный и быстрый для своего размера, он оснащен тигельные щеткой двигателя и микро JST 1.25 разъем. Он совместим с обоими R415 и RX3SM микро Orange RX приемников. Это сервопривод поставляется с аксессуарами и полной гарантией.

Технические характеристики:
Крутящий момент: 0.40kg ~ 0.50kg
Вес: 2,8 г
Скорость: 0,11 ~ 0.09Sec / 60deg
Напряжение: 4.8V ~ 6.0V
Зубчатая передача: Нейлон
Тип двигателя: Coreless
Заткните: JST Connector шаг 1,25мм (Will Fit Оба Orange Rx R415 и RX3SM приемники)

* Примечание: Рабочее напряжение не может быть выше , чем 6В.

  • Артикул 019000007-0
  • Brand Blue Arrow
  • Вес ( г ) 13.00
  • длина 90.00
  • Width 10.00
  • Высота 70.00
  • Крутящий момент ( кг ) (мин . 0,01 кг ) 0.50
  • Скорость (п / 60deg ) 0.09
  • А ( мм ) 22.00
  • В ( мм ) 20.00
  • С ( мм ) 19.00
  • D ( мм ) 8.30
  • Е ( мм ) 27.00
  • F ( мм ) 12.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good: The servos are light and handle extended servorates (ca. /- 130pcnt)
Not so good: They are not so strong. Compared with the Blue Arrow 3g metal gear servo (www.hobbyking.com/hobbyking/store/__41919__Blue_Arrow_3g_High_Speed_Digital_MG_Micro_Servo_50kg_06sec_60deg.html) these servos are much weaker. So consider to choose the 3g servo, it is not much heavier but much stronger but costs a little bit more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good: The servos are light and handle extended servorates (ca. /- 130pcnt)
Not so good: They are not so strong. Compared with the Blue Arrow 3g metal gear servo (www.hobbyking.com/hobbyking/store/__41919__Blue_Arrow_3g_High_Speed_Digital_MG_Micro_Servo_50kg_06sec_60deg.html) these servos are much weaker. So consider to choose the 3g servo, it is not much heavier but much stronger but costs a little bit more.

Good little servo. Perfect for micro planes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good little servo. Perfect for micro planes.

Weighs 3.0g with contact and cable but without servo arm/screw. Very slow compared to TGY-D1290P. Centers well, but with noticeable slow-down when approaching the desired position. I would certainly not refer to this servo as a "high-speed"! Bought two as spares for my D1290Ps, thinking that these would fit directly into the R415 RX. They do, but you have to exchange the white and black cables first. The cables can be pulled out of the white plastic connector by carefully lifting the thin white retainer plastic bars (that hold each cable connector in place) and gently tug at the corresponding cable, then carefully pushing them back in and make sure they lock in place. Will not buy them again because D1290P weighs the same, is a lot faster and stronger and also holds the position much better when submitted to force. The only hassle with D1290P is that you have to exchange the connector (it has the wrong pitch), e.g. for these: MOL125F-LEAD (I did this by soldering and using small diameter shrink tube for isolation). But I think the extra work is really worth it. This review actually became an advertisement for the D1290P... :-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Weighs 3.0g with contact and cable but without servo arm/screw. Very slow compared to TGY-D1290P. Centers well, but with noticeable slow-down when approaching the desired position. I would certainly not refer to this servo as a "high-speed"! Bought two as spares for my D1290Ps, thinking that these would fit directly into the R415 RX. They do, but you have to exchange the white and black cables first. The cables can be pulled out of the white plastic connector by carefully lifting the thin white retainer plastic bars (that hold each cable connector in place) and gently tug at the corresponding cable, then carefully pushing them back in and make sure they lock in place. Will not buy them again because D1290P weighs the same, is a lot faster and stronger and also holds the position much better when submitted to force. The only hassle with D1290P is that you have to exchange the connector (it has the wrong pitch), e.g. for these: MOL125F-LEAD (I did this by soldering and using small diameter shrink tube for isolation). But I think the extra work is really worth it. This review actually became an advertisement for the D1290P... :-)

Hello,
you must look at the servo connector, mine are reversed :signal and minus (-)
I use a Rx Fr Sky, model TFR6M with micro connectors in a Galaxy from HobbyKing (indoor model)
Fabrice

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello,
you must look at the servo connector, mine are reversed :signal and minus (-)
I use a Rx Fr Sky, model TFR6M with micro connectors in a Galaxy from HobbyKing (indoor model)
Fabrice

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save