Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA
  • Global

BMS-385DMAX Цифровой сервопривод (Metal Gear) 4.2kg / .15sec / 16.5g

BMS-385DMAX Цифровой сервопривод (Metal Gear) 4.2kg / .15sec / 16.5g

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

1 228,14 руб.
Stock:
Вес:
38 g
Артикул:
BMS-385DMAX

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Описание
товара
BMS-385DMAX Цифровой сервопривод (Metal Gear) 4.2kg / .15sec / 16.5g
Это сервопривод предназначен для использования в приложениях планера R / C. При использовании углерода нейлоновые шестерни и оптимизации кривизны передач, зубчатые колеса способны выдерживать большие объемы силы.
Сервопривод автоматически узнать тайминги импульса передатчика Абонентская и замок в сигнал каждый раз. Сервопривод также включает в себя буфер сигнала в CPU с БЕЗОТКАЗНОЙ функциональностью.
Сервопривод поставляется с пакетом аксессуаров и универсальной JR / Hitec "S" разъем, который физически и электрически совместимы со всеми основными марками приемников проданных по всему миру.

1. M9.6 шарикоподшипник (Si-масло)
2. Дополнительный высокий крутящий момент с низким уровнем сигнала влияют и успех получить сертификацию CE.
3. Резиновые уплотнители для водонепроницаемом корпусе
4. Предназначен для использования в приложениях планера R / C.
5. Futaba совместимый 25-зуб алюминий 6061 выход шлицы
6. Приводной двигатель Digital с ультра-квадрат сигнала PWM
7. Автоматическое определение сервопривода ширины импульса центр
8. Металлические зубчатые колеса из алюминиевого сплава 6061 материала в сочетании с легким и сильным C95 материалом
Функция 9. Fail-Safe
10. Цифровое управление IC - СОП пакет с передачей данных 12bit
11. MOS-FET микросхемы драйвера двигателя, который может обрабатывать пиковые нагрузки 7A
12. Общая на 6.0V

Вес: 16.5grams / 0.59oz
Размеры: 26 х 13 х 26 мм / 1,16 х 0,51 х 1,02 дюйма
Крутящий момент при 4.8V: 4.2kg / см, 57 унций / в
Крутящий момент при 6.0V: 4,7 кг / см, 62 унций / в
Скорость В 4,8В: 0.15sec / 60 град при отсутствии нагрузки
Скорость В 6.0V: 0.13sec / 60 град при отсутствии нагрузки
Product
Specifications

Дополнительная информация

  • Артикул:
    BMS-385DMAX
  • Brand:
    Нет
  • Вес ( г )
    38.00
  • длина
    70.00
  • ширина:
    35.00
  • Высота:
    60.00
  • Скорость (п / 60deg )
    0.13
  • Крутящий момент ( кг ) (мин . 0,01 кг )
    4.70
  • Unit Weight (g):
    16.5
  • А ( мм ):
    37.00
  • В ( мм )
    27.00
  • С ( мм )
    31.50
  • D ( мм ):
    13.00
  • Е ( мм ):
    36.00
  • F ( мм )
    20.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Used this for my tricopter since its a fairly strong servo with replacement gears available. Its held up well in a few crashes, haven't needed to replace any gears yet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My first negative review. Brought a while back for a tricopter. Had a few minor spill, nothing major. Went to fly it yesterday now that it is warm and the gears must be stripped. Not replacing it with one of these.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Came well packed and worked out of the box! Little noisy but pretty precise. Using it on a DIY RCExplorer TriCopter and works flawlessly. Doesn't heat up or lose it's sync! Feels very robust too. Recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just posted a review where I state that the top gear on this servo is silver-colored plastic. I was wrong, it is made of aluminum (which is pliable and therefore, when I tore it apart, initially looked like it was plastic). Mea culpa.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am using this servo in my Talon Tricopter. It worked perfectly until I had a bad crash and stripped some gears. Not the servo's fault. However, when I bought the replacement gear set, I discovered that a replacement ball bearing set is not included in the bag. If you happen to damage the top gear, where the ball bearing set seats, you will find it is almost impossible to remove the ball bearing set without destroying it. Therefore, if you damage the top gear (which is silver and looks metal but is in reality silver-colored plastic), you cannot replace it because you can't remove the ball bearing set to install it on the replacement gear. The gears that get stressed lots are metal; two other gears are plastic (one black plastic and one silver-colored plastic). I liked this servo a lot, but would love it if HK would include a replacement ball bearing set with the replacement gear set. As I understand it, usually people only strip that one black plastic gear, which is very easy to replace. I ended up buying an identical servo to replace the old one, simply for the lack of a replacement ball bearing set.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good servo, although thought it might be a bit slow.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Worked well with my 2nd rcexplorer.se tricopter build...had some problems with other servo before (from another online seller), but this one has been working well for a while now!!! bought some more for spares, and i think they will be in the shelve for a while until the next build...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am really impressed with these BMS 385D-Max servos. They are my default option for flaps on my homebuilt "Scratcho" moulded 64" gliders used for slope soaring and dynamic soaring. I've used more than 14 of them and had great success. I don't think I've ever had one fail, except after a huge crash and many of them have survived enormous crashes and are still being re-used. I put a lot of hours into flying these planes and fly them hard so it's a pretty good test. I actually can't believe how solid and strong they are for the price. I've even fitted them into a 3.3m heavy slope glider with huge flaps, DSed it and they were perfect. I try to convince other guys to give them a try but I think they're a bit suspicious that they must be crap for such a good price, but they're not - they're tough, long lasting, reliable, perfect centring, fast enough and have plenty of grunt. Excellent. My standard setup for every Scratcho except the very lightest and the very heaviest ones is BMS385's on flaps and Bluebird 555's on ailerons. The 385's are good for rudder/ elevator on big mouldies too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
perfect servo. Used in on my tricopter!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I haven't got a good review for this cause I fry it with out even knowing don't know how it happen
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.