Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

393,37 руб.
Stock:
Вес:
45 g
Артикул:
CS238MG

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

Модель: CS238MG
Рабочее напряжение: 4.8V / 6.0V
Рабочий ток: 300 мА / 400 мА
Рабочая скорость: 0.15sec.60º / 0.14sec.60º
Блокирующий момент: 4kg.cm / 4.6kg.cm
Размер: 29X13X30mm
Вес: 22g
Мертвая зона: ≤5uSec
Операционная путешествия: 40º / одна сторона импульс путешествия 400us
Потенциометр: 3 слайдер / Direct Drive
Шариковый подшипник: MR106
Коробка передач: Металл
Провод разъема: 215мм
Диапазон рабочих температур: -20 ° С + 60 ° С

Product
Specifications

Дополнительная информация

  • Артикул:
    CS238MG
  • Brand:
    Corona
  • Вес ( г )
    45.00
  • длина
    76.00
  • ширина:
    32.00
  • Высота:
    51.00
  • Скорость (п / 60deg )
    0.14
  • Крутящий момент ( кг ) (мин . 0,01 кг )
    22.00
  • Unit Weight (g):
    22
  • А ( мм ):
    35.00
  • В ( мм )
    30.00
  • С ( мм )
    31.00
  • D ( мм ):
    13.00
  • Е ( мм ):
    41.00
  • F ( мм )
    19.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Overall
Value
I have today received the 12/20/16 servos. I check operation. Good. A bit noisy. I expect that plastic rocking are too loose, as written here. I received plastic rocking in the set, which is not possible to deliver. Too small hole shaft splines serfs. If you turn to deliver, with great effort and put a great effort removed.
Quality
Overall
Value
Quality
Overall
Value
I have today received the 12/20/16 servos. I check operation. Good. A bit noisy. I expect that plastic rocking are too loose, as written here. I received plastic rocking in the set, which is not possible to deliver. Too small hole shaft splines serfs. If you turn to deliver, with great effort and put a great effort removed.
Quality
Overall
Value
Quality
Overall
Value
I have today received the 12/20/16 servos. I check operation. Good. A bit noisy. I expect that plastic rocking are too loose, as written here. I received plastic rocking in the set, which is not possible to deliver. Too small hole shaft splines serfs. If you turn to deliver, with great effort and put a great effort removed.
Quality
Overall
Value
Quality
Overall
Value
I have today received the 12/20/16 servos. I check operation. Good. A bit noisy. I expect that plastic rocking are too loose, as written here. I received plastic rocking in the set, which is not possible to deliver. Too small hole shaft splines serfs. If you turn to deliver, with great effort and put a great effort removed.
Quality
Overall
Value
Quality
Value
Overall
I have old serwo SC238MG with the red inscription Corona. It has well-fitting T-bar lift well. New with the orange inscription are loose. This is not the problem, some tape and it is well. New serwa work so as old, well. ( I always unscrew the casing and check the solder).
Quality
Value
Overall
Quality
Value
Overall
Smooth, not too noisy, centre OK. The horns, while not being a tight fit on the output shaft are OK once the screw is installed and tightened.
Quality
Value
Overall
Quality
Value
Overall
Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.
Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.
Quality
Value
Overall
Quality
Value
Overall
Bought some to replace the stock (plastic geared) rudder servo in the Dynam Pitts Python. It is a direct fit into the slot for the Pitts.
I am really happy with the quality of these Corona servo. Smooth and quiet. Really nice set of mounting accessories come included that allow you to mount vertically or horizontally.
I'll be getting more for any of the bigger jobs.
Cheers Michael
Quality
Value
Overall
Quality
Value
Overall
Gute stellgenaue servos und fr den Preis absolut zu empfehlen.
Quality
Value
Overall
Quality
Value
Overall
Bought 8 of these servos. On all the horns fits very poorly on the splined shaft and even after screwing them on tightly, there is a big play. I fixed mine by using teflon tape. See the attached file how to do this and now the horns fits vey nicely. It is otherwise a great servo with very high torque for it small size. The gear train has a lot of gears. See the attached file so how can Corona equip them with such poor horns. Its a mystery. I give only 2 crowns because of this.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.