Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Кукушка Laser Cut Kit 580мм (KIT)

Кукушка Laser Cut Kit 580мм (KIT)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
426 g
Артикул:
CUCKOOKIT

Combine

essential items and
esc
battery
servo
motor
acc
Описание
товара

Кукушка это весело сборки лазерной резки традиционных строителей комплект, который может быть приведен в действие либо толкающим двигателем или блоком EDF. Какой бы путь вы решили власти кукушка, конечным результатом является то весело, старое время ищет parkfly модель.

Технические характеристики:
Размах: 580мм
Длина: 500мм
Полетный вес: 120г
4-канальный

Требуется:
Ваш собственный 4-канальный TX и RX Micro
3 х 2.5G Servo
Батарея 800mAh 2s LiPoly
C10 2900kv безщеточный (толкатель) или EDF 30 Unit & безщеточный в соответствии с
5A ESC ж / BEC (толкатель) или 10A ESC ж / BEC (EDF)
легкие Перекрытия
аппаратные средства

Product
Specifications

Дополнительная информация

  • Артикул:
    CUCKOOKIT
  • Brand:
    Не применимо
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    426.00
  • длина:
    630.00
  • ширина:
    65.00
  • Высота
    175.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Quite a nice kit. However, in it's "out of the box" state the fuselage is no way near strong enough. In particular the pylon area that supports the wing mounting and the tail boom. To strengthen the pylon I carefully drilled down through it in 3 places, slid cocktail sticks into the holes and cyno'ed them (did the same to the pilot!). For the boom I used some of the balsa waste to laminate pieces along both sides and shaped by light sanding. Choice of motor is critical as the diameter of the prop is limited. I don't think EDF option is practical as they are very power hungry and flight times are therefore compromised. I ended up using a high KV motor, a cut down prop and a 500maah 3s battery (2s for indoor flying) I found when shrinking up the covering on the wing tips that it distorted the tip bending it upwards. I left it as is as upswept tips add to stability and you see it on many aircraft- so long as they're equal!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The balsa looks to be of good quality, and the laser cutting is precise.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall fun kit to build (got the kit version). Trick is to build it as light as possible. There is only so much clearance between the motor and tail boom so prop options are limited. I wish the photos showed it ready to fly with the battery, esc, servos etc installed as it Lost some of its cool factor. I would strengthen the boom or replace wit carbon fiber, I think there is some warping if you don't. Definitely a light to no wind plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall