Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

Dart 450 FPV Quad-Copter с распределением питания, чистой и грязной, светодиодной подсветкой и LV сигнализации

Dart 450 FPV Quad-Copter с распределением питания, чистой и грязной, светодио...

QTY:

Now save сэкономь 3 040,81 руб. 3 040,81 руб.

Special Price 1 409,95 руб. 1 409,95 руб.

You save сэкономь 3 040,81 руб. 3 040,81 руб.

Was  4 450,76 руб.

Stock:
Вес:
560 g
Артикул:
9107000359-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
motor
acc
Описание
товара

HobbyKing вводит новый Dart к серии. Dart 450 FPV H Quad упакован с еще более широкими возможностями, и все же сохраняет весело цену.

Дротик 450 пачек некоторые большие возможности, дизайн, долговечность, внешний вид и все же не будут срывать банк. Рама поставляется с чистой и грязные системы виброизоляции, разработан, чтобы дать камеру и летные контроллер хороший плавный ход. Dart 450 также имеет встроенную систему распределения мощности, которая монтирует ESC-х, а также для непосредственного монтажа XT60 / T-разъемов. Она также имеет ориентацию головы и хвоста Встроенная светодиодная световая система и аварийный сигнал низкого напряжения, связанный со светодиодами с зуммером, а также выходы AUX питания для A / V и FC! Рама имеет прорезать каналы с ЧПУ для маршрутизации проводки через рамку, что делает его одним из самых чистых устанавливает вы можете иметь.

Руки двигателя хороши и мускулистый на 5 мм толщиной для свободного аварии повреждения, и все же сделал свет во всех нужных местах. Dart также имеет камеры варианты крепления для FPV и HD, смонтированных вперед и от опоры зрения. Новый 450 очистит 10inch реквизита и принять батареи так широко, как 56mm!

Если сравнить Dart к конкуренции единственное, что меньше является цена.

Особенности:
• Системы очистки и грязный виброизоляция
• Распределение мощности со встроенным в разъем питания монтировки и светодиодные местная подсветка
• Встроенная сигнализация низкого напряжения привязаны к СИД и зуммер
• 8 ~ 10 дюймов проп адаптируемой
• каналы маршрутизации провода для чистой установки
• 5 мм толщиной двигателя оружие

Технические характеристики:
Колесная база: 450мм
Вес: 399g

Необходимые:
Двигатели: 2212 ~ 2216 размер
Пропеллеры: 8 ~ 10 дюймов
Контроллер полета: 30-45mm расстояние монтажа
Батарея: 3 ~ 4s 2100-5400mah
5ch Радио

Product
Specifications

Дополнительная информация

  • Артикул:
    9107000359-0
  • Brand:
    Нет
  • Вес ( г )
    560.00
  • длина
    350.00
  • ширина:
    30.00
  • Высота:
    95.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This frame is a lot of fun. With the anti vib mount she is great. It fit up to a 22XX motor with up to 30amp ESC. It come with a holder with a camera an all the hardware you need to build.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Soldering is not too great on the PDB. It's a bit heavy and a bit weak.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
There are no spares for this item, I had been waiting 2 weeks before I got a reply saying that there are no spares as I needed some arms now I have to get a new frame, don't bother buying this frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A well made frame. Nick thick arms with all the holes pre drilled. The fixings and accessories are well made with aluminium spacers and steel screws. The PDB is well equipped with pre-installed and wired LED, with two modes (Solid/Flash). Would recommend thread lock on all fixings!

The frame has plenty of room inside for all components. The PDB has plenty of pads to enable tidy wiring and easy access to power anywhere on the quad.

My spec below:

900KV ntm motors
10" props
Afro 30a ESC
5000mah 4S lipo
Hitec Rx/Tx

Couple of issues with the frame however.

1. No nylon stand offs for the FC
2. No Nylon screws for the Vibration Dampers
3. Black Dampers are far too soft. Change to Blues

The above 3 points are all standard on the Dart 400, not sure why this doesn't get the same treatment. Hence the 4 crowns.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
When I purchased this I was skeptical about it's performance, After equipping it with Naza M flight computer some nice motors and FPV set-up. I was impressed. It flew wonderfully and stable. Then due to my error i dropped it out of the sky about 100ft. Hit the grass hard... To my surprise just the camera popped off NO DAMAGE to the frame or anything else. Put the camera back on and to this day it has over fifty flights and still flies great. I'm going to buy another soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame with a few desing flaws. I bought 2 frames, both had the light mode switch ripped off and missing parts. One of the post had no threads. I find the rubber absorber a little weak. You need to order nylon screws to hold the dirty frame and clean frame together so they do not seperate when you try to install the battery. The little post used as landing gear are very weak. you should replace them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Besides some initial problems with the delivery of this item (like others, the button for the battery alarm had broken off in shipping) - it has so far been a decent and fun frame to fly. The arms seem pretty durable, and its fairly light weight. With no assembly instructions, I would say its a moderate-level build - but is very clean looking when finished thanks to the integrated PDB, mounting area for ESC's and ample room for electronics.

The vibration dampening balls that come with it are very soft, and will not hold much weight in the clean section before bottoming out. You will probably want to get blue 65g dampeners (http://www.hobbyking.com/hobbyking/store/__55649__Vibration_Damping_Ball_65g_Bag_of_8_US_Warehouse_.html). Even with those, this still isn't meant to hold much weight. I have a gimbal and controller mounted on the front of mine and still get some vibration from the clean section of the frame - luckily I mostly shoot photos, my video is usable but not amazing.

I paird this frame with 30A Simonk ESC's and NTM Prop Drive Series 2830-1100KV Motors, and it fly very smooth and nice.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just finished mine no problem with screws at all. Pictures in files section. Oh my switch for the LEDs was missing the button but the switch still works, you just need a cap screw to press inside the hole.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good frame with very thick and durable arms. Only minus is the cheap quality of screws. Be careful when tightening so you won't round them. Also, one spacer on the top or "clean" part of the frame didn't have threads on other end. Why there is no spare screws included?

I like the power distribution and the very bright LEDs very much too and the presoldered XT-60 is a nice little extra.

My setup has a Multistar 4S Li-Po, 2216-11 900KV Sunnysky motors and 10x4.7 props and seems to be flying smooth. Haven't tested with video gear yet, but I think it will be smooth too and there should be room for a FPV camera AND a GoPro or Mobius. :)

I recommend this frame for everyone who are looking for this sized quad frame for FPV or aerial video. Unbeatable in this price point! Just add some extra screws...

verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Dart 450 PCB FPV Quad

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
motor
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.