Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

Д-р Mad Thrust 1600kv 2400watt 90мм версия EDF Inrunner 6s (36мм)

Generating Links

Д-р Mad Thrust 1600kv 2400watt 90мм версия EDF Inrunner 6s (36мм)

Цена:

Now save сохранить 0,00 A$ 0,00 A$

91,80 A$
Уже купили Discontinued Product

Please continue searching for a similar product.
Артикул:
107000117
Хотите бесплатную доставку? кликните сюда Узнать больше!

Представляем наш доктор Mad Thrust Высокая производительность EDF мотор серии. Наш доктор был деловито работает далеко за кулисами, чтобы придумать с этим MAD серии EDF двигателей ....... Мощность? - Не хватает с ними!

Это 1600kv 6s версия в соответствии с 90 мм EDF единиц, с колоссальным выходной мощности 2400watt этот 36мм Inrunner не стоит пренебрегать!

Dr Mad Thrust диапазон EDF inrunners были построены только с одной вещью в виду - максимальная производительность EDF! Они имеют высокой температуры обмотки статора, высокие подшипники качества, являются точность сбалансирован для плавного хода и дизайна 4 полюса.

Над спроектированные для обработки стресс и напряжение высокой производительности EDF единиц и высокой 'C' номинальных пакетов. Доктор было трудно на работе, чтобы принести вам ряд пуленепробиваемые, экстремальные характеристики EDF двигателей, которые построены до конца.

Получить Доктор Mad Упорный питания дом для вашего EDF!


Технические характеристики:
RPM / V: 1600kv
Напряжение: 2-6s
Максимальный ток: 100А
Максимальная мощность: 2400 Вт
Похожие Обороты Диапазон рабочих.
Высокий Клинок Количество: 32000 оборотов в минуту
Низкая клинка Количество: 37000 оборотов в минуту
Поляки: 4
Диаметр: 36мм
Передняя монтажных отверстий Расстояние: 25 мм
Диаметр вала: 5мм
Длина вала: 13мм
Передняя крепление Размер резьбы: M3
Тип штекера: Пули-разъем 4 мм
Вес: 317g

  • Kv ( об / об) 1600.00
  • Max Токи (A) 100.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 22.00
  • Мощность (Вт ) 2400.00
  • Вал А ( мм) 5.00
  • Длина В ( мм ) 74.00
  • Диаметр С ( мм ) 36.00
  • Может Длина D (мм ) 74.00
  • Общая длина E (мм ) 90.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Dr Mad Thrust EDF Motors
Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

elektriker | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Sep 08, 2016

Bin von dem Motor begeistert.
Super Leistung und Wirkungsgrad, wird kaum warm.
Dreht einen 12-Blatt Rotor, den Dr Mad Thrust 90mm 12 blade fan.
Der Sound ist toll, leises Rauschen, fast schon zu leise.
Erst bei Vollgas hört man was.

| Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 31, 2015

Great motor. I've got mine in the Taft fan in my HK Cobra (you'll need a 100A ESC) and it puts out 2200W.

Mark | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 31, 2015

Mind blowing performance for your $$$

I bought 2 of these for my 6S cat and added cooling jackets. Performance is stunning . This is the 2nd race boat that I have fitted Dr Mad Thrust and they perform at the pointy end always. Thanks H/K

| Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2015

i got this for a 2mtr glider running it on 3s 2600mah 60c discharge battery a 100a delux esc and a 14x8 folding prop and only pulling 44amps loads of power and stays nice and cool happy days

Natali | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Nov 02, 2014

As an update to my previous review above. I installed the exact motor above that wasn't up to 8s and an EVO fan in a Taft 11 blade fan and ran it on 6s and it did amazing. LOTS of power and smooth running. Motor is staying cool and was a pretty easy fit. (just a little trimming on the shroud for it to fit)

elektriker | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2014

Sehr zufrieden.
Funktioniert sehr gut mit original FlyFly-EDF @ 6S ca. 65A.
Hat auch kein Problem mit dem DPS Series 90mm 12 Blade EDF-Rotor bei 6S und ca. 85A.

Very satisfied.
Works very well with original FlyFly-EDF @ 6S approximately 65A.
Also has no problem with the DPS Series 90mm EDF-12 blade rotor at 6S and about 85A.

Howdeedoodee | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2014

I put this in a carbon fibre jet see here http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://ascomsk.narod.ru/fx-27.htm&prev=/searchpcnt3Fqpcnt3Dascpcnt2Bfx27pcnt26rlspcnt3Dcom.microsoft:en-GB:MIE-Address
I ran it on ASPEC 2200mah 6s battery on a 7 x 7 prop and it screams through the air with that speed of sound and is as fast as my stratair viper https://www.youtube.com/watch?v=WD2yT-aEzMY

siskojuice | Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 06, 2014

its a Dr mad thrust good thrust with 6s batt

Tonino | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2014

Sorry to say that in my case these motors do not live up to their expectation. Totally different kV between 2 of the same motors (25pcnt). One pulling 105 amp (but choking the ESC) producing a lousy 1.45 kg thrust. The other using 122 amps (getting hot) and producing a lousy 2 kg of thrust with 90mm CSF. Had to cut open my brand new plane to get these out and replace them for 2x HetRC producing 2x 3.5 kg thrust. Still debating with HK on waranty.

g00seman | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 15, 2014

I bought one of these and installed it in a Changesun 12 blade 90mm fan.
I used a red brick 125 amp esc and 6s1p zippy compact 35c 4500 battery pack.
This motor is awesome, the fan runs so smooth and i didnt have to balance anything.
I use this in the FLYFLY hobby topgun L-39 also from HKing.
This model took off in 50 feet and hand launches as well so easily it flies out your hand.
I will deff be purchasing more of these motors in future, on 6s and a 12 blader they a great combo for 2500 watts.

Grant

  1. 1
  2. 2
Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!