Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

DYS Smart3 3 Ось GoPro Gimbal с комитетом по контролю над AlexMos (BaseCam)

DYS Smart3 3 Ось GoPro Gimbal с комитетом по контролю над AlexMos (BaseCam)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
410 g
Артикул:
206000007-0

Combine

essential items and
acc
Описание
товара

DYS является мировым производителем класса в течение многих лет и является одним из первых уполномоченных AlexMos производителей принять систему управления BaseCam. Теперь они предлагают класс GoPro 3 оси шарнира для популярного меньшего диапазона Мультикоптер.

Там нет конкурса между видом воздушного видео, снятого с 3 оси стихи 2 оси карданный. Проблема 3 оси шарниры были зарезервированы для больших камер и более мощных Мультикоптер. Теперь Smart3 приносит силу AlexMos и BaseCam к классу GoPro из Мультикоптер. Выгоды от добавленных 3 оси позволяет покупать камеру не только Мультикоптер, с расширенными возможностями, как замок рыскания и рыскания следуют режимы. Все 3 оси 'можно управлять с помощью передатчика RC и различных типов режимов, выбранных на лету-Live.

Если вы готовы к результатам PRO уровня, но не хотят вкладывать средства в огромном Мультикоптер и снаряжение ... смотреть не дальше, чем на Dys smart3.

Особенности:
• AlexMos плата управления работает BaseCam 3 оси
• качество DYS
• 3 оси
• Различные режимы настраивается с помощью графического интерфейса пользователя BaseCam
• Легкий вес
• Plug-и-играть готов
• DJI Phantom Совместимость

Технические характеристики:
Вес: 262g
Размер: 80x90x90mm
Вложение: Крюк / стержень (50 мм) или тупики и поддержка DJI Phantom
BaseCam Версия: Авторизованный и полная поддержка обновлений

Product
Specifications

Дополнительная информация

  • Артикул:
    206000007-0
  • Brand:
    Нет
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    410.00
  • длина:
    120.00
  • ширина:
    120.00
  • Высота
    120.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Just got this, worked pretty decent out of box no tune or anything. Sometimes it does not face the correct yaw direction, but if you push it into place it corrects it. I have not gone into the computer to tune or edit (may be something i can work out). Doesn't seem to need too much of a calibration out of box, but will be doing one soon to make sure. I would recommend as it seems to be a decent 3 axis gimbals on the cheaper side compared to other models. Time will tell though if it lasts (crossing my fingers), will update if anything major comes up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
it looks to be a really good gimbal but BE AWARE input voltage betwen 9V and 12.4V !
( i wasn't noticed ibout that so now i have tou buy an UBEC ....)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A good gimball, out of the box settings were OK, did some tuning and it works great, especially for the price, i have seen a lot of more expensive gimbals not having the performance of thisone. The Alexmos board gives you so many options that you can make this gimball do almost anything
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice gimbal for the price, carbon all round with a couple of exceptions like the gopro holder. Yaw axis works well unless connected to my computer, in which case it only works sometimes. Using it with a gopro 4 black and need about 5g of weight on the pitch motor to balance it out. The reason i dont give it 5 stars is the description labels dji phantom support, but it can only be mounted to a phantom by two standoffs. and then it hangs too low so you need bigger landing gear, preferably retracts. Might mount this on my Bumblebee frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not quite 'Plug and play' Took a few hours to install and finally set up the Gimbal.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The manual is not very informative. I would like to know the pin assignment on the controller. Also the orientation of the imu sensor.
Eventually I was able to figure it out thanks to RCG. Making it work, updating the software was than possible. Sometimes the third axis (rudder ) does not work.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Do not waste your money! Mine worked fairly good a couple of flights; after that the gimbal started to jump and shake like crazy. I reinstall firmware, but never managed to make it work.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice Gimbal. Had lot of trouble setting up initially as I reset the default setting and nothing seems to work after and it was lying on the table for the first 3 months, almost giving up. Then, it happened. Had been using for around 9 months now. Very happy with it. Just have to check the scrub screw that holds one of the motor as this sometimes become loose causing jello.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this gimbal thinking it would provide smooth video. It does to a certain extent, a lot of tinkering with Pids and firmware. I find firmware v2.3 seems to work best, with a gopro 4. I would have rather saved my cash and bought the Feiyu tech, which is a lot more expensive.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
it's pretty much a plug and play gimbal as written in the description. Mine worked well out of the box but to get it running perfectly, you have to put in a lot of time and effort.
I'm looking forward to the next testflights.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • 3 Axis Gimbal

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [146kb]
No File Name download now [146kb]

Combine

essential items and
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.