New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

EDF Канальный вентилятор Блок 6Blade 2.75inch 70mm

EDF Канальный вентилятор Блок 6Blade 2.75inch 70mm

Shipped From:
  • USA
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

395,06 руб.
Статус:
Есть в наличии
Вес:
65 g
SKU:
HKEDF70
WANT FREE SHIPPING? Click here to find out more!
EDF Канальный вентилятор Блок 6Blade 2.75inch 70mm
Лезвие Диаметр: 68.3mm / 2.68inch
Внешний Диаметр корпуса: 73мм
Толщина стенки: 1.53mm
EDF Длина: 59мм
Передняя Плащаница Диаметр: 83мм
Мотор: Отверстия для крепления (от 18мм и 22мм)
Тип лезвия: 6
Размер вала: 4мм
Это EDF будет принимать двигатель с максимальным диаметром 28мм (см
. Соответствующие параметры)

Изготовлен из высокопрочного пластика
, армированного.
 
  • Артикул HKEDF70
  • Brand -
  • Емкость ( мАч ) -
  • Вес ( г ) 65.00
  • длина 95.00
  • Width 60.00
  • Высота 85.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

perfect fin in my vampire

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfect fin in my vampire

Looks like a good unit, however it will not fit the 64mm t-45 as mentioned below without a LOT of sanding to the aircraft to make it fit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks like a good unit, however it will not fit the 64mm t-45 as mentioned below without a LOT of sanding to the aircraft to make it fit.

solid edf unit, i have used it to replace the unit in my mig 15, the six blade has good whoosh noise at altitude, comes with a prop adapter and spinner

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

solid edf unit, i have used it to replace the unit in my mig 15, the six blade has good whoosh noise at altitude, comes with a prop adapter and spinner

good quality and well balanced edf

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good quality and well balanced edf

super price they come with a 4mm shaft

converter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

super price they come with a 4mm shaft

converter

Great for that little money!

Replaced the edf on my Zephyr V70 with this one because original was broken.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great for that little money!

Replaced the edf on my Zephyr V70 with this one because original was broken.

This was very cheap so I bought one just to see what it's like. The plastic does seem a little thin but could easily be reinforced with a bit of glass cloth and epoxy. I bought the Turnigy 2226-3000 70mm EDF Outrunner to go in it and although it is supposed to be 29mm in diameter, it fits the above edf surprisingly well without any mods at all. The edf comes with a shaft adapter which fits the motor and four screws to hold it in place and everything lines up just fine. I haven't tried it yet as I haven't received the ESC for it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This was very cheap so I bought one just to see what it's like. The plastic does seem a little thin but could easily be reinforced with a bit of glass cloth and epoxy. I bought the Turnigy 2226-3000 70mm EDF Outrunner to go in it and although it is supposed to be 29mm in diameter, it fits the above edf surprisingly well without any mods at all. The edf comes with a shaft adapter which fits the motor and four screws to hold it in place and everything lines up just fine. I haven't tried it yet as I haven't received the ESC for it.

Lots of fun for 4.. I brought this just for the fun of owning an EDF unit to play with but after getting 717g of static thrust with an old inrunner I am half way through building a plane to mount it in. Build quality is not so good, it required some trimming with a blade but it was only 4. you get what you pay for/1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lots of fun for 4.. I brought this just for the fun of owning an EDF unit to play with but after getting 717g of static thrust with an old inrunner I am half way through building a plane to mount it in. Build quality is not so good, it required some trimming with a blade but it was only 4. you get what you pay for/1

Had no problems with it, it is of the correct dimensions, the plastic was not warped and the lip on the front is removable, decreasing the size of the fan.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Had no problems with it, it is of the correct dimensions, the plastic was not warped and the lip on the front is removable, decreasing the size of the fan.

this unit is well okay cheap , and you really need to choose an appropriate edf motor for it , it took me a while to align the blade on this one!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this unit is well okay cheap , and you really need to choose an appropriate edf motor for it , it took me a while to align the blade on this one!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!