Соединенные Штаты
Shipped From:

Emax PM1806-2300Kv Бесщеточный Multi-Rotor Motor Set (1xCW 1xCCW)

Emax PM1806-2300Kv Бесщеточный M...

В бесщеточные двигатели Emax находятся на переднем крае технологий с уникальным использованием стеклянных армированных пластиков в конструкции корпуса. Это приводит к ультра-легкий вес двигателя, который до сих пор сохраняет прочность и долговечн...

Now save сэкономь 191,40 руб. 191,40 руб.

Special Price 661,91 руб. 661,91 руб.

Now save сэкономь 191,40 руб. 191,40 руб.

Was  853,31 руб.


Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


В бесщеточные двигатели Emax находятся на переднем крае технологий с уникальным использованием стеклянных армированных пластиков в конструкции корпуса. Это приводит к ультра-легкий вес двигателя, который до сих пор сохраняет прочность и долговечность. В сочетании с высокими подшипниками класса и магнитов, а также надежная металлическая фигурная статора и опоры.

Каждый набор включает в себя как по часовой стрелке и против часовой стрелки, резьбовые адаптеры гребного винта, что делает их обязательным для 250 размера мультиэффекты роторов.

• армированный стекловолокном пластмассовый корпус
• Легкий и прочный
• подшипники высокого качества
• Магниты высокого качества
• CW и CCW резьбовые адаптеры -Декоратор
• Металлические вставки для монтажа

Технические характеристики:
Поляки: 9N12P
KV (RPM / V): 2300
Входное напряжение: 2 ~ 3S (7,4 ~ 11.1V)
Макс Thrust: 290г
Опора Размер: 5 ~ 6 дюймов
Похожие ESC: 6 ~ 10amps
Вес продукта : 1 9г (каждый)

PROP Мощность / PWM% Напряжение (V) Ток (A) Упорный (ГФ) RPM
5X4.5 STD 10 11,1 0,28 10,07 2595
5X4.5 STD 25 11,1 1,45 96,79 7269
5X4.5 STD 50 11,1 3,94 209,7 10589
5X4.5 STD 75 11,1 7,91 338,61 13626
5X4.5 STD 100 11,1 9,03 363,57 14144
5X4.5 STD 10 14.8 0.32 22.12 3602
5X4.5 STD 25 14.8 2,06 151,62 9039
5X4.5 STD 50 14.8 5,61 311,08 13136
5X4.5 STD 75 14.8 11.39 473,45 16022
5X4.5 STD 100 14.8 12,37 487,52 16210


Дополнительная информация

  • Лезвие Граф:
    Не применимо
  • Скорость (п / 60deg ):
  • Крутящий момент ( кг ) (мин . 0,01 кг )
  • Диаметр X (дюймы )
  • А ( мм ):
  • В ( мм ):
  • С ( мм )
  • D ( мм )
  • Е ( мм ):
  • F ( мм ):
  • Артикул
  • Вес ( г )
  • длина:
  • ширина:
  • Высота
  • Kv ( об / об)
  • Max Токи (A):
  • Мощность (Вт ):
  • Длина В ( мм )
  • Может Длина D (мм )
  • Максимальное напряжение (В ):
  • Вал А ( мм):
  • Unit Weight (g)
  • Диаметр С ( мм )
  • Общая длина E (мм ):
  • Сопротивление ( тк ):

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, log in or register

The motors are of very poor quality. The casing in plastic is extremely fragile and broke off after the 1st flight. The holding of the shaft broke off from the upper part.
I do not recommend this motors.
im very disapointed... very weak motors... it needs just a little hit and 10pcnt slower
for this price you can buy 2204-2300 kv motors
i do not recomend it if you are a beginner and if you are a pro/expert than you nevah' gonna buy these..... "motors"
These motors are stunning! They are 10 times better than the multistar motors, some people say they are weak and may break, I have had tens of very, very hard crashes and they work like a dream! The only disadvantage is the fact that they do scratch, not being metal, but this is nothing, doesn't effect the function, just bugs me a bit... I am using 12amp King Kong escs with 2200mah 3s 30c and a 1500mah 3s 25mah, 230 frame and the props are 5x3, although I think you can use 5x3x3 props, but i am yet to test... Btw, the bearings are fine, one was a bit stiff, but loosened up after a fly and a bit. Also use ecalc to add it up.
I purchased these to put on my HK Color 250 Frame and they are perfect. This I my first attempt at an FPV quad and these motors did not break the bank at all. I'm using them with a 4x-12A ESC and the motors have more than enough power and punch out with gemfan 5030 props. I hit a pole in my fire station and landed upside down on a concrete floor and the motors were perfectly fine... Not even a scratch. I will definitely be purchasing these again!
work very good on my 3d printed 250 quad!!!
Stay away from these, unless you never crash your multirotor!

The smallest crash will separate the motor from the base. The bearing is surrounded by a 1 mm plastic shell which joins the top of the motor to the mounting plate. The slightest impact on these will cause the top of the motor to separate, and the wires will inevitably rip out.

I broke every single one from very minor crashes. In all cases, the propellers didn't even break which shows how minor the crashes were.

If you buy these, you might as well throw your money away. HK shouldn't even stock these because of how low quality they are.
Not powergull but its cheap.. if you fly slow, there is no problem
I love this ones I ordered 4 but maybe I going to order many more
These motors are great. I purchased these for my first ever quad build. They have a uniform 16mm spacing for mounting. If you cut the wires you will have to scrape off the enamel to tin the wires with a soldering iron. They are only warm after running for almost ten minutes constant (3s) on a 250 frame with recommended props.
So far these motors have been working really well for my budget build color 250 quadcopter. Balance is good, has plenty of power and much better quality than I expected from a plastic motor.
View all reviews
  • EMax Multi Rotor Plastic Motor

Upload video

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.